You Save:
Inclusive of all taxes
Product not available
Cooler Master MasterCase H500P Mesh ARGB ATX Mid-Tower w/Front Mesh, 2X 200mm ARGB Fans, Tempered Glass Side Panel and 2X Vertical GPU Card PCI Slots
Dual 200mm argb fans – the iconic, addressable RGB fans are the core of the H-series in design and function, capable of operating quietly while moving high volumes of air due to their size
MIND-BLOWING DESIGN
When Gaming Gets Serious
Every serious gaming system requires a substantial amount of airflow. Not just for freshly built rigs, but also for upgrading hardware in the future. The MasterCase H500P Mesh ARGB ATX PC case was engineered for exactly that. Now, with dual 200mm ARGB fans, premium addressable lighting comes pre-installed—one upgrade checked off.
Mesh spans the entire front to provide an unrestricted pathway for air, fed to the two massive fans behind the panel. The top panel, however, is only partially mesh since a completely open top panel causes heated air to recirculate, degrading performance. Airflow is
quite literally optimized, with an abundance of fresh air entering the system while hot air is exhausted through precise routes.
Whether extreme water-cooling or air-cooling is the preferred method, the MasterCase H500P Mesh ARGB delivers versatility,
performance, and customizability with ARGB lighting for good measure.
Features
Equal parts refined, rugged, & ruthless.
Every serious gaming system requires a substantial amount of airflow. Not just for freshly built rigs, but also for upgrading hardware in the future. The MasterCase H500P Mesh ARGB was engineered for exactly that. Now, with dual 200mm ARGB fans, premium addressable lighting comes pre-installed—one upgrade checked off.
Mesh spans the entire front to provide an unrestricted pathway for air, fed to the two massive fans behind the panel. Whether extreme water-cooling or air-cooling is the preferred method, the MasterCase H500P Mesh ARGB delivers versatility, performance, and customizability with ARGB lighting to boot.
Dual 200mm ARGB Fans
The iconic, addressable RGB fans are the core of the H-Series in design and function, capable of operating quietly while moving high volumes of air due to their size.
Mesh Front Panel
Two layers of mesh make up the entire front panel to maximize airflow. A finer layer filters out dust while the steel mesh reinforces its structure.
Build By Design
Transparent panels and a tempered glass side panel flaunt the hardware & fans, while the cable covers, PSU shroud, and cable management space hide the clutter.
ARGB Lighting System
The pre-installed ARGB fans can be managed by either the motherboard or an included controller, connected by the included splitter, to create a comprehensive ARGB lighting system.
Tempered Glass Side Panel
Gaming hardware, custom-loop cooling, and the pure pride of the builder is shown in panoramic view through an edge-to-edge tempered glass side panel.
ARGB Controller
The small ARGB Controller is a mini-sized controller that allows your Addressable RGB such as fans and LED strips to be powered and controlled even in PC systems without an A-RGB capable motherboard.
The controller comes with 14 lighting presets to make full use of the Addressable LEDs in the system and also allows to be completely switched off by long pressing its button.
It is also possible to attach any external 2pin button to it to be able to switch presets without having to open the system. For ease of use, Cooler Master allows the RESET button to be optionally connected to the controller and used as an external ARGB preset switch button.
Specifications | |
Model Number | MCM-H500P-MGNN-S11 |
Series | MasterCase Series |
Size | Mid Tower |
Materials | Steel, Plastic, Tempered Glass, Mesh |
Motherboard Support | Mini ITX, Micro ATX, ATX, E-ATX*, (*support for up to 12" x 10.7", will limit cable management features) |
Expansion Slots | 7+2, (Supports vertical graphics card installation) |
5.25" Drive Bays | N/A |
2.5" / 3.5" Drive Bays (combo) | 2 |
2.5" Drive Bays | 2 (Max.4) |
I/O Panel | 2x USB 3.2 Gen 1 (formerly USB 3.0), 2x USB 2.0, 1x 3.5mm Audio Jack, 1x 3.5mm Mic Jack, 1x ARGB Controller, 1x ARGB 2-to-3 splitter |
Pre-installed Fans - Front | 2x 200mm ARGB Fan |
Pre-installed Fans - Rear | 1x 140mm, 1200RPM |
Fan Support - Top | 3x 120/140mm, 2x 200mm |
Fan Support - Front | 3x 120/140mm, 2x 200mm |
Fan Support - Rear | 1x 120/140mm |
Radiator Support - Top | 120mm, 140mm, 240mm, 280mm, 360mm |
Radiator Support - Front | 120mm, 140mm, 240mm, 280mm, 360mm |
Radiator Support - Rear | 120mm, 140mm |
Clearance - CPU Cooler | 190mm |
Clearance - PSU | 220mm |
Clearance - GFX | 412mm/16.2" |
Dust Filters | Top, Front, Bottom |
Power Supply Support | Bottom mount, ATX |
Dimensions (L x W x H) | 544 x 242 x 542mm / 21.4 x 9.5 x 21.3 inch |
Weight | 11.3 kg |
Available Color(s) | Gun Metal Grey |
Warranty | 2 Years |
Note | ***Features, Price and Specifications are subject to change without notice. |
Every serious gaming system requires a substantial amount of airflow. Not just for freshly built rigs, but also for upgrading hardware in the future. The MasterCase H500P Mesh ARGB ATX PC case was engineered for exactly that. With dual 200mm ARGB fans, premium addressable lighting comes pre-installed—one hardware upgrade checked off from the start. Mesh spans the entire front to provide an unrestricted pathway for air, feeding the two massive fans behind the panel.
The top panel is only partially mesh; a completely open top panel would cause heated air to recirculate, degrading performance. Airflow is optimized, allowing an abundance of fresh air to enter the system while hot air exhausts through precise routes. Whether extreme water-cooling or air-cooling is the preferred method, the MasterCase H500P Mesh ARGB delivers versatility, performance, and customizability with ARGB lighting for good measure.
The MasterCase H500P Mesh ARGB was designed for the serious gaming enthusiast who understands the importance of effective cooling and optimal performance. With dual 200mm ARGB fans, the case comes with premium addressable lighting pre-installed. The mesh design spans the front panel, ensuring an unrestricted pathway for air fed by the two massive fans located behind it. The case supports extreme water-cooling and air-cooling methods, delivering versatility, performance, and customizability.
The iconic, addressable RGB fans are the core of the H-Series, capable of operating quietly while moving high volumes of air due to their size. Optimized for both performance and aesthetics, these fans ensure that your system remains cool while adding a touch of customizable RGB flair.
Two layers of mesh make up the entire front panel to maximize airflow. A finer layer filters out dust, while the steel mesh reinforces the structure. This dual-layer design ensures that while air flows freely, dust is kept to a minimum, maintaining internal components' cleanliness and longevity.
Transparent panels, including a tempered glass side panel, flaunt the hardware and fans, while cable covers, a PSU shroud, and a designated cable management space hide the clutter.
The pre-installed ARGB fans can be managed through either the motherboard or an included controller. Connected by an included splitter, this comprehensive ARGB lighting system allows users to create a personalized and dynamic light show. Certified compatible with ASUS, Gigabyte, MSI, and ASRock motherboards, this system ensures broad compatibility and ease of use.
Gaming hardware, custom-loop cooling, and the pure pride of the builder are shown in panoramic view through the edge-to-edge tempered glass side panel. This feature not only showcases your build but also adds a premium touch to the overall aesthetics.
The small ARGB Controller is a mini-sized controller that allows your Addressable RGB components such as fans and LED strips to be powered and controlled even in PC systems without an A-RGB capable motherboard. The controller comes with 14 lighting presets to make full use of the addressable LEDs in the system and also allows them to be completely switched off by long-pressing its button.
It is also possible to attach any external 2-pin button to it to switch presets without opening the system. For ease of use, Cooler Master allows the RESET button to optionally connect to the controller and be used as an external ARGB preset switch button.