"Precore"

Equipment Features Instructional placard Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. Upholstery Premium-quality 3D urethane moulded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double topstitching on all seams. Rubber Feet Yes Adjustments Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting colour for ease of use. Water Bottle and Accessories Holder The drink and accessory holder features a large open, even surfaced area which is easily accessible and easy to keep clean. Bearings and Pivot Points Oversized, linear, re-circulating ball bearings run on case-hardened shafts, and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilising either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications. Pulleys and Cables Glass-fibre reinforced nylon pulleys for durability, with precision motor grade ball bearing pulleys. All cables consist of 7 x 19-strand aircraft cable coated with black pressure-extruded nylon (either 3/16-inch cable coated to 1/4 inch or 1/8-inch cable coated to 3/16 inch). The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimise chance of external interference. Frame and Finish The frame is 11 gauge (0.3 cm; 0.120 in) 2x10 cm (2x4 in) electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The abrasive grit pre-finish is followed by an electrostatically applied, heat-cured powder coat. General Features Dual independent-movement arms feature upper pivots to accommodate arm lengths and can be set to 13 starting positions over a 120-degree range. Weight stack offset to user's right for the most convenient access. Weight Stack 109 kg (240 lbs). Equipment Specifications Incremental Add-on Weight 5 lbs / 2.3 kg Standard Shroud Colour Pacific Blue Black Weight Stack (kg/lbs) 240 lbs / 109 kg Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Workout Area (L x W) 208 L x 208 W / 82 L x 82 W Weight Stack(s) Weight Stack(s) Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centreless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position. Equipment Dimensions & Weight Length 54 inches / 137 cm Width 56 inches / 142 cm Height 84 inches / 213 cm Equipment Weight 594 lbs / 269 kg Delivery Dimensions & Weight Delivery Weight 655 / 297 Regulatory EN957 EN957 ASTM Yes

Equipment Features Rubber Feet Yes Instructional placard Yes Frame and Finish Oversized tubes are 11-gauge steel and fully welded in all structural areas. Powder-coated frames. Adjustments N/A Equipment Specifications Standard Color- Carriage Metallic Ash Standard Upholstery Colours Black Mahogany Imperial Blue Paprika Graphite Royal Blue Slate American Beauty Red Terracotta Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Weight Storage Horns 4 Max Load Weight 327 kg/720 lb Starting Weight 40 kg/89 lb Equipment Dimensions & Weight Length 211 cm / 83 inches Width 160 cm / 63 inches Height 144 cm / 56,5 inches Equipment Weight 206 kg / 455 lbs Product Working Area Dimensions Length 211 cm / 83 inches Width 282 cm / 111 inches Height 144 cm / 56,5 inches

Equipment Features Rubber Feet Standard Frame and Finish 11 gauge (.120") and 7 gauge (.188") 3x4-inch and 3x3 electro weld steel tubing. Electrostatically applied, heat-cured powder coat. Optional Accessories Band Peg Kit (pair), Torso Trainer, Combo Rack Connector Kit, Dip Station, Reverse Bar Catch (pair), Side by Side Connector Kit (6 ft long x 1.5 in diameter / 182.9 x 3.8 cm OR 8 ft long x 2 in diameter / 243.8 x 5.1 cm) Optional Lifting Platform Platforms are 8 ft. wide x 6 ft. deep x 3 inches thick • 40.75 inch wide center wood insert • Random width tongue and groove interlocking #1 oak panels • Six layers of water based polyurethane to prevent yellowing • ¾ inch high density rubber covers the outside sections • Outside frame locks into the rack and is coated in Wrinkle Black • Custom Logo option also available Step Up Platform The Chin-Up and Pull-Up station step up platform is dipped in a non-slip material and angled so that an Olympic Bar placed on it for front of rack exercises rolls toward the upright for a more stable storage position. Additional Storage Olympic Bar and functional apparatus storage is conveniently positioned to enhance accessibility. Dual vertical Olympic Bar storage receptacles feature a rubber bumper to protect Olympic Bar ends from metal on metal contact. Anchor Points Convenient anchor points high, low and an adjustable anchor point on the back of the bar catches allow for resistance applications like straps and bands. Rounded gussets create unique anchor points that prevent bands and straps from wearing as easily. Straight Bar A smooth, straight Pull-Up / Chin-Up bar allows for kipping style pull-ups, chin-ups and muscle-ups, as well as a convenient anchor point for suspension training apparatuses. Weight Plate Storage Weight plate storage horns are 1.5 inch in diameter so they don't bind the weight plates, making them easier to add or remove. Horns are spaced to accommodate all bumper style plates simultaneously. 10 weight plate storage horns, 5 per side. Equipment Specifications Maximum User Weight 350 lbs / 159 kg Max Lift Load Capacity 800 lb / 363 kg Max Storage Weight 2,200 lb / 1000 kg Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Workout Area (L x W) 83 L x 63 W x 98 H inches, 210 x 160 x 249 cm Equipment Dimensions & Weight Length 83 in / 211 cm Width 63 in / 160 cm Height 98 in / 249 cm Equipment Weight 612 lbs / 278 kg Delivery Dimensions & Weight Length Box 1 = 99 in / 253.5 cm, Box 2 = 98 in / 248.5 cm Width Box 1 = 30.5 in / 77.5 cm, Box 2 = 19 in / 48.5 cm Height Box 1 = 12 in / 30 cm, Box 2 = 16 in / 40 cm Delivery Weight Box 1 = 360 lbs / 163 kg, Box 2 = 323 lbs / 147 kg

Equipment Features Instructional placard Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. Upholstery Premium-quality 3D urethane moulded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double topstitching on all seams. Rubber Feet Yes Adjustments Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting colour for ease of use. Water Bottle and Accessories Holder The drink and accessory holder features a large open, even surfaced area which is easily accessible and easy to keep clean. Bearings and Pivot Points Oversized, linear, re-circulating ball bearings run on case-hardened shafts, and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilising either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications. Pulleys and Cables Glass-fibre reinforced nylon pulleys for durability, with precision motor grade ball bearing pulleys. All cables consist of 7 x 19-strand aircraft cable coated with black pressure-extruded nylon (either 3/16-inch cable coated to 1/4 inch or 1/8-inch cable coated to 3/16 inch). The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimise chance of external interference. Frame and Finish The frame is 11 gauge (0.3 cm; 0.120 in) 2x10 cm (2x4 in) electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The abrasive grit pre-finish is followed by an electrostatically applied, heat-cured powder coat. General Features Movement arm designed to create optimal motion path. Ratcheting gas-assisted seat adjusts to fit a wide range of users. Weight Stack 91 kg (200 lbs). Equipment Specifications Incremental Add-on Weight 5 lbs / 2.3 kg Standard Shroud Colour Pacific Blue Black Weight Stack (kg/lbs) 200 lbs / 91 kg Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Workout Area (L x W) 226 L x 157 W / 89 L x 62 W Weight Stack(s) Weight Stack(s) Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centreless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position. Equipment Dimensions & Weight Length 67 inches / 170 cm Width 52 inches / 132 cm Height 59 inches / 150 cm Equipment Weight 538 lbs / 244 kg Delivery Dimensions & Weight Delivery Weight 580 / 265 Regulatory EN957 EN957 ASTM Yes

Equipment Features Rubber Feet Standard Frame and Finish 11 gauge (.120") and 7 gauge (.188") 3x4-inch and 3x3 electro weld steel tubing. Electrostatically applied, heat-cured powder coat. Optional Accessories Band Peg Kit (pair), Torso Trainer, Combo Rack Connector Kit, Side by Side Connector Kit (6 ft long x 1.5 in diameter / 182.9 x 3.8 cm OR 8 ft long x 2 in diameter / 243.8 x 5.1 cm) Optional Lifting Platform Platforms are 8 ft. wide x 6 ft. deep x 3 inches thick • 40.75 inch wide center wood insert • Random width tongue and groove interlocking #1 oak panels • Six layers of water based polyurethane to prevent yellowing • ¾ inch high density rubber covers the outside sections • Outside frame locks into the rack and is coated in Wrinkle Black • Custom Logo option also available Step Up Platform The Chin-Up and Pull-Up station step up platform is dipped in a non-slip material and angled so that an Olympic Bar placed on it for front of rack exercises rolls toward the upright for a more stable storage position. Additional Storage Olympic Bar and functional apparatus storage is conveniently positioned to enhance accessibility. Dual vertical Olympic Bar storage receptacles feature a rubber bumper to protect Olympic Bar ends from metal on metal contact. Anchor Points Convenient anchor points high, low and an adjustable anchor point on the back of the bar catches allow for resistance applications like straps and bands. Rounded gussets create unique anchor points that prevent bands and straps from wearing as easily. Straight Bar A smooth, straight Pull-Up / Chin-Up bar allows for kipping style pull-ups, chin-ups and muscle-ups, as well as a convenient anchor point for suspension training apparatuses. Weight Plate Storage Weight plate storage horns are 1.5 inch in diameter so they don't bind the weight plates, making them easier to add or remove. Horns are spaced to accommodate all bumper style plates simultaneously. 10 weight plate storage horns, 5 per side. Equipment Specifications Maximum User Weight 350 lbs / 159 kg Max Storage Weight 2200 lbs / 1000 kg Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Workout Area (L x W) 71 L x 61 W x 98 H in / 180 x 155 x 249 cm Max Load Weight 600 lbs / 272 kg Equipment Dimensions & Weight Length 71 in / 180 cm Width 61 in / 155 cm Height 98 in / 249 cm Equipment Weight 453 lbs / 206 kg Delivery Dimensions & Weight Length Box 1 = 99 in / 251.5 cm , Box 2 = 97 in / 246.5 cm Width Box 1 = 28.5 in / 72.5 cm, Box 2 = 16.5 in / 41.5 cm Height Box 1 = 12 in / 30 cm, Box 2 = 15.5 in / 39 cm Delivery Weight Box 1 = 287 lbs / 130 kg, Box 2 = 234 lbs / 106 kg

Equipment Features Instructional placard Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. Upholstery Premium-quality 3D urethane moulded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double topstitching on all seams. Rubber Feet Yes Adjustments Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting colour for ease of use. Water Bottle and Accessories Holder The drink and accessory holder features a large open, even surfaced area which is easily accessible and easy to keep clean. Bearings and Pivot Points Oversized, linear, re-circulating ball bearings run on case-hardened shafts, and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilising either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications. Pulleys and Cables Glass-fibre reinforced nylon pulleys for durability, with precision motor grade ball bearing pulleys. All cables consist of 7 x 19-strand aircraft cable coated with black pressure-extruded nylon (either 3/16-inch cable coated to 1/4 inch or 1/8-inch cable coated to 3/16 inch). The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimise chance of external interference. Frame and Finish The frame is 11 gauge (0.3 cm; 0.120 in) 2x10 cm (2x4 in) electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The abrasive grit pre-finish is followed by an electrostatically applied, heat-cured powder coat. General Features Movement arm designed to create optimal motion path. Ratcheting gas-assisted seat adjusts to fit a wide range of users. Weight Stack 91 kg (200 lbs). Equipment Specifications Incremental Add-on Weight 5 lbs / 2.3 kg Standard Shroud Colour Pacific Blue Black Weight Stack (kg/lbs) 200 lbs / 91 kg Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Workout Area (L x W) 226 L x 157 W / 89 L x 62 W Weight Stack(s) Weight Stack(s) Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centreless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position. Equipment Dimensions & Weight Length 67 inches / 170 cm Width 52 inches / 132 cm Height 59 inches / 150 cm Equipment Weight 538 lbs / 244 kg Delivery Dimensions & Weight Delivery Weight 580 / 265 Regulatory EN957 EN957 ASTM Yes

Equipment Features Instructional placard Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. Upholstery Premium-quality 3D urethane moulded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double topstitching on all seams. Rubber Feet Yes Adjustments Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting colour for ease of use. Water Bottle and Accessories Holder The drink and accessory holder features a large open, even surfaced area which is easily accessible and easy to keep clean. Bearings and Pivot Points Oversized, linear, re-circulating ball bearings run on case-hardened shafts, and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilising either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications. Pulleys and Cables Glass-fibre reinforced nylon pulleys for durability, with precision motor grade ball bearing pulleys. All cables consist of 7 x 19-strand aircraft cable coated with black pressure-extruded nylon (either 3/16-inch cable coated to 1/4 inch or 1/8-inch cable coated to 3/16 inch). The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimise chance of external interference. Frame and Finish The frame is 11 gauge (0.3 cm; 0.120 in) 2x10 cm (2x4 in) electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The abrasive grit pre-finish is followed by an electrostatically applied, heat-cured powder coat. General Features Unique ratcheting system easily adjusts the start position. Arm, seat and back pad position secures the user and maximises oblique muscle engagement. Weight Stack 73 kg (160 lbs). Equipment Specifications Incremental Add-on Weight 5 lbs / 2.3 kg Standard Shroud Colour Pacific Blue Black Weight Stack (kg/lbs) 160 lbs / 73 kg Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Workout Area (L x W) 135 L x 163 W / 53 L x 64 W Weight Stack(s) Weight Stack(s) Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centreless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position. Equipment Dimensions & Weight Length 50 inches / 127 cm Width 54 inches / 137 cm Height 59 inches / 150 cm Equipment Weight 451 lbs / 205 kg Delivery Dimensions & Weight Delivery Weight 495 / 225 Regulatory EN957 EN957 ASTM Yes

Equipment Features Weight Stack Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position. Upholstery Premium-quality 3D urethane moulded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double topstitching on all seams. Rubber Feet Yes Instructional placard Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. Water Bottle and Accessories Holder The drink and accessory holder features a large open, even surfaced area which is easily accessible and easy to keep clean. Bearings and Pivot Points Oversized, linear, re-circulating ball bearings run on case-hardened shafts, and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilising either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications. Adjustments Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting colour for ease of use. Pulleys and Cables Glass-fibre reinforced nylon pulleys for durability, with precision motor grade ball bearing pulleys. All cables consist of 7 x 19-strand aircraft cable coated with black pressure-extruded nylon (either 3/16-inch cable coated to 1/4 inch or 1/8-inch cable coated to 3/16 inch). The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimise chance of external interference. Frame and Finish The frame is 11 gauge (0.3 cm; 0.120 in) 2x10 cm (2x4 in) electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The abrasive grit pre-finish is followed by an electrostatically applied, heat-cured powder coat. General Features Angled pad positions arms for maximum comfort and efficiency. Ratcheting gas-assisted seat adjusts to fit a wide range of users. Weight stack 73 kg (160 lbs). Equipment Specifications Incremental Add-on Weight 5 lbs / 2.3 kg Standard Shroud Colour Pacific Blue Black Weight Stack (kg/lbs) 160 lbs / 73 kg Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Workout Area (L x W) 124 L x 107 W / 49 L x 42 W Equipment Dimensions & Weight Length 47 inches / 119 cm Width 44 inches / 112 cm Height 59 inches / 150 cm Equipment Weight 442 lbs / 200 kg Delivery Dimensions & Weight Delivery Weight 475 / 215 Regulatory EN957 EN957 ASTM Yes

Equipment Features Plate Storage Pins No Rubber Feet Yes Instructional placard Yes. Frame and Finish Oversized 4x2-inch frames are 11 and 8-gauge steel and welded in all structural areas. Powder-coated frames. Equipment Specifications Standard Shroud Colour Black Grip Diameter 32 cm (1.25 inches) Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame / Movement Arm or Carriage Colors Frame: Gloss Metallic Silver Movement Arm: Metallic Ash Frame: Black Pearl Movement Arm: Metallic Ash Frame: Black Magic Gloss Movement Arm: Metallic Ash Frame: Gloss White Movement Arm: Metallic Ash Frame: Metallic Ash Movement Arm: Gloss Metallic Silver Frame: Desert Bronze Movement Arm: Gloss Metallic Silver Max Load Weight 102 kg (225 lbs) Starting Weight 5 kg (11 lbs) Equipment Dimensions & Weight Length 122 cm (48 inches) Width 167 cm (66 inches) Height 140 cm (55 inches) Machine Weight (base equipment) (kg/lbs) 331 lbs / 150 kg Warranty Other (including hand grips, end caps, cables, selector pins, shrouds) 1 year Labour 1 year Frame 10 years

Equipment Features Instructional placard Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. Upholstery Premium-quality 3D urethane moulded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double topstitching on all seams. Rubber Feet Yes Adjustments Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting colour for ease of use. Water Bottle and Accessories Holder The drink and accessory holder features a large open, even surfaced area which is easily accessible and easy to keep clean. Bearings and Pivot Points Oversized, linear, re-circulating ball bearings run on case-hardened shafts, and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilising either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications. Pulleys and Cables Glass-fibre reinforced nylon pulleys for durability, with precision motor grade ball bearing pulleys. All cables consist of 7 x 19-strand aircraft cable coated with black pressure-extruded nylon (either 3/16-inch cable coated to 1/4 inch or 1/8-inch cable coated to 3/16 inch). The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimise chance of external interference. Frame and Finish The frame is 11 gauge (0.3 cm; 0.120 in) 2x10 cm (2x4 in) electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The abrasive grit pre-finish is followed by an electrostatically applied, heat-cured powder coat. General Features Conveniently located release handle for seat adjustment to fit a wide range of users. Low-maintenance rollers and rigid tubular chrome steel tracks create smooth exercise motion. Weight Stack 181 kg (400 lbs). Equipment Specifications Incremental Add-on Weight 10 lbs / 4.5 kg Standard Shroud Colour Pacific Blue Black Weight Stack (kg/lbs) 400 lbs / 182 kg Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Workout Area (L x W) 221 L x 122 W / 87 L x 48 W Weight Stack(s) Weight Stack(s) Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centreless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position. Equipment Dimensions & Weight Length 77 inches / 196 cm Width 48 inches / 122 cm Height 59 inches / 150 Equipment Weight 875 lbs / 397 kg Delivery Dimensions & Weight Delivery Weight 960 / 435 Regulatory EN957 EN957 ASTM Yes

Equipment Features Rubber Feet Yes Standard Features ● Adjustable safety stops are easily accessed from the user position ● Standard six (6) weight plate storage horns ● Standard foot pads and heavy-duty leveller device copes with uneven floor surfaces Instructional placard Squat & Bench Press Adjustments 16 bar hooks @ 102 mm (4") increments Equipment Specifications Frame The frame is 11 gauge (0.305 cm, 0.120 in) 6x5 cm (2 in) trapezoidal steel tubing electro-welded to 11.56x5.80x0.29 cm (4.55x2.28x0.113 in) thick bent flat oval steel tubing. The weight bar is 4130 cold drawn seamless steel tube, 3.50 cm (1.375 in) diameter x 0.24 cm (0.095 in) thick. Grip Diameter 35 mm (1.375") Standard Frame / Movement Arm or Carriage Colors Frame: Gloss Metallic Silver Movement Arm: Metallic Ash Frame: Black Pearl Movement Arm: Metallic Ash Frame: Black Magic Gloss Movement Arm: Metallic Ash Frame: Gloss White Movement Arm: Metallic Ash Frame: Metallic Ash Movement Arm: Gloss Metallic Silver Frame: Desert Bronze Movement Arm: Gloss Metallic Silver Weight Storage Horns Six storage horns, each 25 cm (10") long (three per side) Max Load Weight 272 kg / 600 lb Starting Weight 11.3 kg (25 lb) Equipment Dimensions & Weight Length 56 in / 142 cm Width 84 in / 214 cm Height 90 in / 229 cm Machine Weight (base equipment) (kg/lbs) 395 lbs / 179 kg Delivery Dimensions & Weight Length 56 in / 142 cm Width 84 in / 214 cm Height 90 in / 229 cm Delivery Weight 395 lbs / 179 kg

Equipment Features Plate Storage Pins No Rubber Feet Yes Instructional placard Yes. Frame and Finish Oversized 4x2-inch frames are 11 and 8-gauge steel and welded in all structural areas. Powder coated frames. Equipment Specifications Standard Shroud Colour Black Grip Diameter 1.25 inches / 32 cm Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame / Movement Arm or Carriage Colors Frame: Gloss Metallic Silver Movement Arm: Metallic Ash Frame: Black Pearl Movement Arm: Metallic Ash Frame: Black Magic Gloss Movement Arm: Metallic Ash Frame: Gloss White Movement Arm: Metallic Ash Frame: Metallic Ash Movement Arm: Gloss Metallic Silver Frame: Desert Bronze Movement Arm: Gloss Metallic Silver Max Load Weight 225 lbs / 102 kg Starting Weight 25 lbs / 11 kg Weight Stack(s) Starting Resistance (kg/lbs) 25 lbs / 11 kg Equipment Dimensions & Weight Length 59 inches / 150 cm Width 30 inches / 76 cm Height 40 inches / 101 cm Machine Weight (base equipment) (kg/lbs) 165 lbs / 75 kg

Equipment Features Plate Storage Pins No Rubber Feet Yes Instructional placard Yes. Frame and Finish Oversized 4x2-inch frames are 11 and 8-gauge steel and welded in all structural areas. Powder-coated frames. Equipment Specifications Standard Shroud Colour Black Grip Diameter 32 cm (1.25 inches) Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame / Movement Arm or Carriage Colors Frame: Gloss Metallic Silver Movement Arm: Metallic Ash Frame: Black Pearl Movement Arm: Metallic Ash Frame: Black Magic Gloss Movement Arm: Metallic Ash Frame: Gloss White Movement Arm: Metallic Ash Frame: Metallic Ash Movement Arm: Gloss Metallic Silver Frame: Desert Bronze Movement Arm: Gloss Metallic Silver Max Load Weight 204 kg (450 lbs) Starting Weight 5.9 kg (13 lbs) Equipment Dimensions & Weight Length 184 cm (72 inches) Width 103 cm (41 inches) Height 120 cm (47 inches) Machine Weight (base equipment) (kg/lbs) 291 lbs / 132 kg

Equipment Features Plate Storage Pins Yes Rubber Feet Yes Instructional placard Yes. Frame and Finish Oversized 4x2-inch frames are 11 and 8-gauge steel and welded in all structural areas. Powder coated frames. Equipment Specifications Grip Diameter 1.5 inches / 38 cm Standard Shroud Colour Black Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame / Movement Arm or Carriage Colors Frame: Gloss Metallic Silver Movement Arm: Metallic Ash Frame: Black Pearl Movement Arm: Metallic Ash Frame: Black Magic Gloss Movement Arm: Metallic Ash Frame: Gloss White Movement Arm: Metallic Ash Frame: Metallic Ash Movement Arm: Gloss Metallic Silver Frame: Desert Bronze Movement Arm: Gloss Metallic Silver Weight Storage Horns 6 Max Load Weight 450 lbs / 204 kg Starting Weight 12 lbs / 5.5 kg Equipment Dimensions & Weight Length 43 inches / 110 cm Width 78 inches / 199 cm Height 70.5 inches / 179 cm Machine Weight (base equipment) (kg/lbs) 346 lbs / 157 kg

Equipment Features Instructional placard Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. Upholstery Premium-quality 3D urethane moulded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double topstitching on all seams. Rubber Feet Yes Adjustments Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting colour for ease of use. Water Bottle and Accessories Holder The drink and accessory holder features a large open, even surfaced area which is easily accessible and easy to keep clean. Bearings and Pivot Points Oversized, linear, re-circulating ball bearings run on case-hardened shafts, and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilising either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications. Pulleys and Cables Glass-fibre reinforced nylon pulleys for durability, with precision motor grade ball bearing pulleys. All cables consist of 7 x 19-strand aircraft cable coated with black pressure-extruded nylon (either 3/16-inch cable coated to 1/4 inch or 1/8-inch cable coated to 3/16 inch). The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimise chance of external interference. Frame and Finish The frame is 11 gauge (0.3 cm; 0.120 in) 2x10 cm (2x4 in) electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The abrasive grit pre-finish is followed by an electrostatically applied, heat-cured powder coat. General Features Gas-assisted seat and inward-facing orientation helps user easily align shoulder joint to pivot. Padded arm pads and fixed handles allow for easy user positioning. Weight Stack 73 kg (160 lbs). Equipment Specifications Incremental Add-on Weight 5 lbs / 2.3 kg Standard Shroud Colour Pacific Blue Black Weight Stack (kg/lbs) 160 lbs / 73 kg Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Workout Area (L x W) 135 L x 142 W / 53 L x 56 W Weight Stack(s) Weight Stack(s) Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centreless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position. Equipment Dimensions & Weight Length 53 inches / 135 cm Width 49 inches / 125 cm Height 59 inches / 150 cm Equipment Weight 498 lbs / 226 kg Delivery Dimensions & Weight Delivery Weight 540 / 245 Regulatory EN957 EN957 ASTM Yes

Equipment Features Plate Storage Pins Yes Rubber Feet Yes Instructional placard Yes. Frame and Finish Oversized 4x2-inch frames are 11 and 8-gauge steel and welded in all structural areas. Powder coated frames. Equipment Specifications Grip Diameter 1.5 inches / 38 cm Standard Shroud Colour Black Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame / Movement Arm or Carriage Colors Frame: Gloss Metallic Silver Movement Arm: Metallic Ash Frame: Black Pearl Movement Arm: Metallic Ash Frame: Black Magic Gloss Movement Arm: Metallic Ash Frame: Gloss White Movement Arm: Metallic Ash Frame: Metallic Ash Movement Arm: Gloss Metallic Silver Frame: Desert Bronze Movement Arm: Gloss Metallic Silver Weight Storage Horns 4 Max Load Weight 360 lbs / 163 kg Starting Weight 10 lbs / 4.5 kg Weight Stack(s) Starting Resistance (kg/lbs) 17 lbs / 7.5 kg Equipment Dimensions & Weight Length 57 inches / 144 cm Width 60.5 inches / 153 cm Height 62 inches / 157 cm Equipment Weight 310 lbs / 141 kg

Equipment Features Plate Storage Pins Yes Rubber Feet Yes Instructional placard Yes. Frame and Finish Oversized 4x2-inch frames are 11 and 8-gauge steel and welded in all structural areas. Powder coated frames. Equipment Specifications Grip Diameter 1.25 inches / 32 cm Standard Shroud Colour Black Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame / Movement Arm or Carriage Colors Frame: Gloss Metallic Silver Movement Arm: Metallic Ash Frame: Black Pearl Movement Arm: Metallic Ash Frame: Black Magic Gloss Movement Arm: Metallic Ash Frame: Gloss White Movement Arm: Metallic Ash Frame: Metallic Ash Movement Arm: Gloss Metallic Silver Frame: Desert Bronze Movement Arm: Gloss Metallic Silver Weight Storage Horns 4 Max Load Weight 450 lbs / 204 kg Starting Weight 5 lbs / 2.5 kg Weight Stack(s) Starting Resistance (kg/lbs) 5 lbs / 2.5 kg Equipment Dimensions & Weight Length 66 inches / 168 cm Width 51 inches / 130 cm Height 76.5 inches /194 cm Equipment Weight 326 lbs / 148 kg

Equipment Features Plate Storage Pins No Rubber Feet Yes Instructional placard Yes. Frame and Finish Oversized 4x2-inch frames are 11 and 8-gauge steel and welded in all structural areas. Powder-coated frames. Equipment Specifications Standard Shroud Colour Black Grip Diameter 32 cm (1.25 inches) Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame / Movement Arm or Carriage Colors Frame: Gloss Metallic Silver Movement Arm: Metallic Ash Frame: Black Pearl Movement Arm: Metallic Ash Frame: Black Magic Gloss Movement Arm: Metallic Ash Frame: Gloss White Movement Arm: Metallic Ash Frame: Metallic Ash Movement Arm: Gloss Metallic Silver Frame: Desert Bronze Movement Arm: Gloss Metallic Silver Max Load Weight 102 kg (225 lbs) Starting Weight 5.5 kg (12 lbs) Equipment Dimensions & Weight Length 136 cm (53 inches) Width 97 cm (38 inches) Height 121 cm (48 inches) Machine Weight (base equipment) (kg/lbs) 258 lbs / 117 kg

Movement Arm Geometry Precise positioning of the movement arm pivot and handles places the user in the optimal position to effectively work major muscles of the upper back in the most effective manner. Chest Pad The chest pad provides upper body stability and comfort, enhancing the effective load challenging the back muscles. Roller Pads and Foot Plate Large, oversized roller pads on the foot catch and the non-skid foot plate enhance lower body comfort and stability, allowing the user to maintain good positioning throughout the exercise.

Equipment Features Rubber Feet Yes Upholstery Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams. Accessory Holder(s) Yes Adjustable Seat Yes Integrated Add-on Weight Yes Adjustments Gas -assist ratcheting seat adjustment requires only a lift to release the lever. Large adjustment handle includes slip-resistant rubber overmold. Adjustment points are highlighted with a contrasting color for easy identification and use. Weight Stack Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position. Bearings and Pivot Points Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications. Pulleys and Cables Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7"x19") aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference. Frame and Finish The frame is 11 gauge (.120 in) 2x4" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The abrasive grit pre-finish is followed by an electrostatically applied, heat-cured powder coat. Instructional placard Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify Water Bottle and Accessories Holder The non-slip drink-and-accessory tray is integrated and features large open, even surface area, easily accessible and easy to keep clean. General Features Natural converging axis allows for more natural motion and greater range of motion. Dual horizontal and neutral handles allow for varying position of the shoulder joint. Arms counterbalance to 10 pound start weight. Weight Stack 200 lbs (91 kg). Equipment Specifications Incremental Add-on Weight 1x5 lbs / 1x2.3 kg Standard Shroud Colour Pacific Blue Black Weight Stack (kg/lbs) 200 lbs / 91 kg Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Equipment Dimensions & Weight Length 61 inches / 155 cm Width 59 inches / 150 cm Height 61 inches / 155 cm Equipment Weight 510 lbs / 231 kg Delivery Dimensions & Weight Delivery Weight 2 (kg/lbs) 580 lbs / 265 kg Regulatory EN957 EN957 ASTM Yes

Equipment Features Instructional placard Easy-to-understand exercise placards feature large set-up, and start and finish position diagrams that are visibly easy to identify. Frame and Finish Heavy-duty industrial-grade steel tubing is welded in all structural areas to withstand the most severe environments. Powder-coated frame. Adjustments None Bolt Down Capability Yes Equipment Specifications Maximum User Weight 350 lb / 159 kg Grip Diameter 1.25 in (31.75 mm) Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame / Movement Arm or Carriage Colors Frame: Gloss Metallic Silver Movement Arm: Metallic Ash Frame: Black Pearl Movement Arm: Metallic Ash Frame: Black Magic Gloss Movement Arm: Metallic Ash Frame: Gloss White Movement Arm: Metallic Ash Frame: Metallic Ash Movement Arm: Gloss Metallic Silver Frame: Desert Bronze Movement Arm: Gloss Metallic Silver Max Load Weight 113 kg (250 lb) Starting Weight 18 kg (40 lb) Equipment Dimensions & Weight Length 75 inches / 190.5 cm Width 39 inches / 98 cm Height 47.5 inches / 120.5 cm Equipment Weight 191 lb / 87 kg Delivery Dimensions & Weight Length Box 1= 49 inches / 123.5 cm Width Box 1= 43 inches / 108.5 cm Height Box 1= 20 inches / 50 cm Delivery Weight 226 lb / 103 kg Length 2 Box 2 = 19 inches / 48.5 cm Width 2 (cm/inches) Box 2 = 10 inches / 25.5 cm Height 2 (cm/inches) Box 2 = 11 inches / 28 cm

Equipment Features Rubber Feet Yes Upholstery Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams. Accessory Holder(s) Yes Adjustable Seat Yes Integrated Add-on Weight Yes Adjustments Gas -assist ratcheting seat adjustment requires only a lift to release the lever. Large adjustment handle includes slip-resistant rubber overmold. Adjustment points are highlighted with a contrasting color for easy identification and use. Weight Stack Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position. Bearings and Pivot Points Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications. Pulleys and Cables Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7"x19") aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference. Frame and Finish The frame is 11 gauge (.120 in) 2x4" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The abrasive grit pre-finish is followed by an electrostatically applied, heat-cured powder coat. Instructional placard Easy-to-understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify Water Bottle and Accessories Holder The non-slip drink-and-accessory tray is integrated and features large open, even surface area, easily accessible and easy to keep clean. General Features Independent movement arms provide exercise variety and recruits more core activity. Converging axis allows for more natural motion and greater range of motion. Unique handle start position adjustment provides on handed adjustments from the seated position. Weight Stack 240 lbs (109 kg). Equipment Specifications Incremental Add-on Weight 1x5 lbs / 1x2.3 kg Standard Shroud Colour Pacific Blue Black Weight Stack (kg/lbs) 240 lbs / 109 kg Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Equipment Dimensions & Weight Length 64 inches / 163 cm Width 49 inches / 125 cm Height 72 inches / 183 cm Delivery Dimensions & Weight Delivery Weight 590 lbs / 268 kg Regulatory EN957 EN957 ASTM Yes

Equipment Features Frame and Finish Heavy duty industrial grade steel tubing is welded in all structural areas to withstand the most severe environments. Powder coated frame. Rubber Feet Rubber foot pads are standard, provide product stability and help to prevent product movement. Weight Storage Qty. (8), 1.5 inch / 38 mm diameter, effective length of 6.9 inches / 175 mm each Equipment Specifications Maximum User Weight 350 lbs. / 159 kg Max Lift Load Capacity 500 lbs. / 227 kg Max Storage Weight 1,760 lb / 800 kg Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Workout Area (L x W) 103 inches / 262 cm x 108 inches / 274.3 cm Equipment Dimensions & Weight Length 79 inches / 200 cm Width 65 inches / 165 cm Height 55 inches / 139.7 cm Equipment Weight 221 lbs. / 100 kg Delivery Dimensions & Weight Length Box 1 = 61 inches / 154.5 cm, Box 2 = 43.5 inches / 110.5 cm Width Box 1 = 34 inches / 85.5 cm, Box 2 = 12 inches / 30.5 cm Height Box 1 = 11 inches / 27 cm, Box 2 = 6.5 inches / 16.5 cm Delivery Weight Box 1 = 226 lbs. / 102.4 kg, Box 2 = 17.2 lbs. / 7.8 kg

Equipment Features Rubber Feet Yes Upholstery Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams. Accessory Holder(s) Yes Adjustable Seat Yes Integrated Add-on Weight Yes Adjustments Gas -assist ratcheting seat adjustment requires only a lift to release the lever. Easy pull-pin allows for adjustment of the large oversized thigh stabilizer pads which are angled for easier entry and exit. Large adjustment handle includes slip-resistant rubber overmold. Adjustment points are highlighted with a contrasting color for easy identification and use. Weight Stack Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position. Bearings and Pivot Points Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications. Pulleys and Cables Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7"x19") aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference. Frame and Finish The frame is 11 gauge (.120 in) 2x4" electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The abrasive grit pre-finish is followed by an electrostatically applied, heat-cured powder coat. Instructional placard Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify Water Bottle and Accessories Holder The non-slip drink-and-accessory tray is integrated and features large open, even surface area, easily accessible and easy to keep clean. General Features Diverging axis allows for more natural motion and greater range of motion. Independent, user defined proprietary handles allow for user’s natural movement , supination and pronation through the pulling range of motion. Ergonomically fit handles are slip resistant over molded handles. Weight Stack 240 lbs (109 kg). Equipment Specifications Incremental Add-on Weight 1x5 lbs / 1x2.3 kg Standard Shroud Colour Pacific Blue Black Weight Stack (kg/lbs) 240 lbs / 109 kg Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Equipment Dimensions & Weight Length 47 inches / 119 cm Width 50 inches / 127 cm Height 84 inches / 213 cm Delivery Dimensions & Weight Delivery Weight 695 lbs / 315 kg Regulatory EN957 EN957 ASTM Yes

Equipment Features Rubber Feet Rubber foot pads are standard, provide product stability and help to prevent product movement. Frame and Finish Heavy duty industrial grade steel tubing is welded in all structural areas to withstand the most severe environments. Powder coated frame. Equipment Specifications Maximum User Weight 350 lbs. / 159 kg Max Lift Load Capacity 400 lb / 182 kg Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Workout Area (L x W) 124 x 102 in / 315 x 259 cm Equipment Dimensions & Weight Length 52.4 inches / 133 cm Width 29.5 inches / 75 cm Height 15 inches / 38 cm Equipment Weight 64 lb. / 29 kg Delivery Dimensions & Weight Length Box 1 = 50.2 inches / 127.5 cm , Box 2 = 49 inches / 124 cm Width Box 1 = 14.4 inches / 36.5 cm , Box 2 = 4.2 inches / 10.5 cm Height Box 1 = 9 inches / 23 cm , Box 2 = 11 inches / 28 cm Delivery Weight Box 1 = 57.3 lbs./ 26 kg , Box 2 = 17.2 lbs. / 7.8 kg

Equipment Features Frame and Finish Heavy duty industrial grade steel tubing is welded in all structural areas to withstand the most severe environments. Powder coated frame. Rubber Feet Rubber foot pads are standard, provide product stability and help to prevent product movement. Weight Storage Qty. (8), 1.5 inch / 38 mm diameter, effective length of 6.9 inches / 175 mm each Equipment Specifications Maximum User Weight 350 lbs. / 159 kg Max Lift Load Capacity 500 lbs. / 227 kg Max Storage Weight 1,760 lbs. / 800 kg Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Workout Area (L x W) 97 inches / 246.5 cm x 108 inches / 274.3 cm Equipment Dimensions & Weight Length 73 inches / 185 cm Width 65 inches / 165 cm Height 51.2 inches / 130 cm Equipment Weight 188.3 lb. / 85.4 kg Delivery Dimensions & Weight Length Box 1 = 58 inches / 147.5 cm, Box 2 = 49 inches / 124 cm Width Box 1 = 34 inches / 85.5 cm, Box 2 = 3.5 inches / 90 cm Height Box 1 = 11 inches / 27 cm, Box 2 = 11 inches / 27.5 cm Delivery Weight Box 1 = 197 lbs. / 89.1 kg, Box 2 = 15 lbs. / 6.7 kg

Equipment Features Instructional placard Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. Upholstery Premium-quality 3D urethane moulded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double topstitching on all seams. Rubber Feet Yes Adjustments Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting colour for ease of use. Water Bottle and Accessories Holder The drink and accessory holder features a large open, even surfaced area which is easily accessible and easy to keep clean. Bearings and Pivot Points Oversized, linear, re-circulating ball bearings run on case-hardened shafts, and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilising either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications. Pulleys and Cables Glass-fibre reinforced nylon pulleys for durability, with precision motor grade ball bearing pulleys. All cables consist of 7 x 19-strand aircraft cable coated with black pressure-extruded nylon (either 3/16-inch cable coated to 1/4 inch or 1/8-inch cable coated to 3/16 inch). The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimise chance of external interference. Frame and Finish The frame is 11 gauge (0.3 cm; 0.120 in) 2x10 cm (2x4 in) electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The abrasive grit pre-finish is followed by an electrostatically applied, heat-cured powder coat. General Features Ratcheting gas-assisted seat adjusts to fit a wide range of users. Handle grips angled for proper exercise mechanics. Weight stack 73 kg (160 lbs). Equipment Specifications Incremental Add-on Weight 5 lbs / 2.3 kg Standard Shroud Colour Pacific Blue Black Weight Stack (kg/lbs) 160 lbs / 73 kg Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Workout Area (L x W) 124 L x 135 W / 49 L x 53 W Weight Stack(s) Weight Stack(s) Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centreless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position. Equipment Dimensions & Weight Length 47 inches / 119 cm Width 44 inches / 112 cm Height 59 inches / 150 cm Equipment Weight 434 lbs / 197 kg Delivery Dimensions & Weight Delivery Weight 470 / 213 Regulatory EN957 EN957 ASTM Yes

Equipment Features Frame and Finish Heavy duty industrial grade steel tubing is welded in all structural areas to withstand the most severe environments. Powder coated frame. Rubber Feet Rubber foot pads are standard, provide product stability and help to prevent product movement. Weight Storage Qty. (4), 1.5 inch / 38 mm diameter, effective length of 6.9 inches / 175 mm each Equipment Specifications Maximum User Weight 350 lbs. / 159 kg Max Lift Load Capacity 500 lbs. / 227 kg Max Storage Weight 880 lbs. / 400 kg Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Workout Area (L x W) 89 inches / 226 cm x 108 inches / 274.3 cm Equipment Dimensions & Weight Length 53.4 inches / 135.5 cm Width 64 inches / 162 cm Height 72 inches / 183 cm Equipment Weight 301 lb. / 136.3 kg Delivery Dimensions & Weight Length Box 1 = 82.5 inches / 209.5 cm , Box 2 = 19.5 inches / 49.5 cm Width Box 1 = 44 inches / 111.5 cm , Box 2 = 12.4 inches / 31.5 cm Height Box 1 = 12.2 inches / 31 cm , Box 2 = 7.5 inches / 19 cm Delivery Weight Box 1 = 331 lbs. / 150 kg , Box 2 = 12 lbs. / 5.5 kg

Equipment Features Instructional placard Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. Upholstery Premium-quality 3D urethane moulded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double topstitching on all seams. Rubber Feet Yes Adjustments Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting colour for ease-of-use. Water Bottle and Accessories Holder The drink and accessory holder features a large open, even surfaced area which is easily accessible and easy to keep clean. Bearings and Pivot Points Oversized, linear, re-circulating ball bearings run on case-hardened shafts, and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilising either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications. Pulleys and Cables Glass-fibre reinforced nylon pulleys for durability, with precision motor grade ball bearing pulleys. All cables consist of 7 x 19-strand aircraft cable coated with black pressure-extruded nylon (either 3/16-inch cable coated to 1/4 inch or 1/8-inch cable coated to 3/16 inch). The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimise chance of external interference. Frame and Finish The frame is 11 gauge (0.3 cm; 0.120 in) 2x10 cm (2x4 in) electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The abrasive grit pre-finish is followed by an electrostatically applied, heat-cured powder coat. General Features Movement arm features forward-set low pivot for proper motion path. Ratcheting gas-assisted seat adjusts to fit a wide range of users. Weight Stack 109 kg (240 lbs). Equipment Specifications Incremental Add-on Weight 5 lbs / 2.3 kg Standard Shroud Colour Pacific Blue Black Weight Stack (kg/lbs) 240 lbs / 109 kg Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Workout Area (L x W) 163 L x 150 W / 64 L x 59 W Weight Stack(s) Weight Stack(s) Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centreless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position. Equipment Dimensions & Weight Length 58 inches / 147 cm Width 59 inches / 150 cm Height 59 inches / 150 cm Machine Weight (base equipment) (kg/lbs) 530 / 240 Delivery Dimensions & Weight Delivery Weight 590 / 268 Regulatory EN957 EN957 ASTM Yes

Equipment Features Frame and Finish Heavy duty industrial grade steel tubing is welded in all structural areas to withstand the most severe environments. Powder coated frame. Rubber Feet Rubber foot pads are standard, provide product stability and help to prevent product movement. Weight Storage Accommodates 15 pairs of 5-75 lb. (2-35kg) dumbbells Equipment Specifications Max Storage Weight 1,200 lbs. / 545 kg Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Equipment Dimensions & Weight Length 87 inches / 220 cm Width 30.3 inches / 77 cm Height 42 inches / 106 cm Equipment Weight 300 lb. / 136 kg Delivery Dimensions & Weight Length Box 1 = 45 inches / 113.5 cm, Box 2 = 87 inches / 221 cm Width Box 1 = 32.5 inches / 82.5 cm, Box 2 = 12 inches / 29.5 cm Height Box 1 = 8.3 inches / 21 cm, Box 2 = 11 inches / 28 cm Delivery Weight Box 1 = 95 lbs. / 43 kg, Box 2 = 231.5 lbs. / 105 kg

Equipment Features Instructional placard Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. Upholstery Premium-quality 3D urethane moulded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double topstitching on all seams. Rubber Feet Yes Adjustments Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting colour for ease of use. Water Bottle and Accessories Holder The drink and accessory holder features a large open, even surfaced area which is easily accessible and easy to keep clean. Bearings and Pivot Points Oversized, linear, re-circulating ball bearings run on case-hardened shafts, and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilising either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications. Pulleys and Cables Glass-fibre reinforced nylon pulleys for durability, with precision motor grade ball bearing pulleys. All cables consist of 7 x 19-strand aircraft cable coated with black pressure-extruded nylon (either 3/16-inch cable coated to 1/4 inch or 1/8-inch cable coated to 3/16 inch). The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimise chance of external interference. Frame and Finish The frame is 11 gauge (0.3 cm; 0.120 in) 2x10 cm (2x4 in) electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The abrasive grit pre-finish is followed by an electrostatically applied, heat-cured powder coat. General Features Curvilinear motion path does not require hip alignment. Long movement arm encourages knee extension for full gluteal involvement. Elbow pad, handles and large base platform stabilise the user during exercise. Weight Stack 73 kg (160 lbs). Equipment Specifications Incremental Add-on Weight 5 lbs / 2.3 kg Standard Shroud Colour Pacific Blue Black Weight Stack (kg/lbs) 160 lbs / 73 kg Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Workout Area (L x W) 213 L x 102 W / 84 L x 40 W Weight Stack(s) Weight Stack(s) Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centreless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position. Equipment Dimensions & Weight Length 53 inches / 135 cm Width 40 inches / 102 cm Height 59 inches / 150 cm Equipment Weight 448 lbs / 203 kg Delivery Dimensions & Weight Delivery Weight 510 / 232 Regulatory EN957 EN957 ASTM Yes

Equipment Features Frame and Finish Heavy duty industrial grade steel tubing is welded in all structural areas to withstand the most severe environments. Powder coated frame. Rubber Feet Rubber foot pads are standard, provide product stability and help to prevent product movement. Weight Storage Accommodates 10 pairs of dumbbells Equipment Specifications Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Harbor Hunter Green Navy New Purple Regal Blue Slate Max Storage Weight 500 lbs. / 227 kg Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Equipment Dimensions & Weight Length 51 inches / 130 cm Width 30.3 inches / 77 cm Height 41 inches / 105 cm Equipment Weight 213 lb. / 96.7 kg Delivery Dimensions & Weight Length Box 1 = 44.7 inches / 113.5 cm , Box 2 = 53.2 inches / 135 cm Width Box 1 = 32.5 inches / 82.5 cm , Box 2 = 11.6 inches / 29.5 cm Height Box 1 = 8.3 inches / 21 cm , Box 2 = 11 inches / 28 cm Delivery Weight Box 1 = 95 lbs. / 43 kg , Box 2 = 139 lbs. / 63 kg

Equipment Features Instructional placard Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. Upholstery Premium-quality 3D urethane moulded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double topstitching on all seams. Rubber Feet Yes Adjustments Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting colour for ease of use. Water Bottle and Accessories Holder The drink and accessory holder features a large open, even surfaced area which is easily accessible and easy to keep clean. Bearings and Pivot Points Oversized, linear, re-circulating ball bearings run on case-hardened shafts, and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilising either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications. Pulleys and Cables Glass-fibre reinforced nylon pulleys for durability, with precision motor grade ball bearing pulleys. All cables consist of 7 x 19-strand aircraft cable coated with black pressure-extruded nylon (either 3/16-inch cable coated to 1/4 inch or 1/8-inch cable coated to 3/16 inch). The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimise chance of external interference. Frame and Finish The frame is 11 gauge (0.3 cm; 0.120 in) 2x10 cm (2x4 in) electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The abrasive grit pre-finish is followed by an electrostatically applied, heat-cured powder coat. General Features Spring-assisted back pad adjusts easily from seated position. Start position and roller pad adjust for optimal exercise mechanics. Weight Stack 109 kg (240 lbs). Equipment Specifications Incremental Add-on Weight 5 lbs / 2.3 kg Standard Shroud Colour Pacific Blue Black Weight Stack (kg/lbs) 240 lbs / 109 kg Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Workout Area (L x W) 168 L x 127 W / 66 L x 50 W Weight Stack(s) Weight Stack(s) Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centreless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position. Equipment Dimensions & Weight Length 53 inches / 135 cm Width 49 inches / 125 cm Height 59 inches / 150 cm Equipment Weight 575 lbs / 261 kg Delivery Dimensions & Weight Delivery Weight 625 / 283 Regulatory EN957 EN957 ASTM Yes

Equipment Features Frame and Finish Heavy duty industrial grade steel tubing is welded in all structural areas to withstand the most severe environments. Powder coated frame. Rubber Feet Rubber foot pads are standard, provide product stability and help to prevent product movement. Weight Storage Accommodates 10 pairs of 5-50 lb. (2-22kg) beauty bells Equipment Specifications Max Storage Weight 400 lb / 182 kg Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Equipment Dimensions & Weight Length 51 inches / 130 cm Width 30.3 inches / 77 cm Height 41 inches / 105 cm Equipment Weight 205 lb. / 93 kg Delivery Dimensions & Weight Length Box 1 = 45 inches / 113.5 cm, Box 2 = 53.2 inches / 135 cm Width Box 1 = 32.5 inches / 82.5 cm, Box 2 = 11 inches / 27 cm Height Box 1 = 8.3 inches / 21 cm, Box 2 = 11 inches / 28 cm Delivery Weight Box 1 = 95 lbs. / 43 kg , Box 2 = 131 lbs. / 59.3 kg

Equipment Features Frame and Finish Heavy duty industrial grade steel tubing is welded in all structural areas to withstand the most severe environments. Powder coated frame. Rubber Feet Rubber foot pads are standard, provide product stability and help to prevent product movement. Weight Storage Accommodates 10 barbells Equipment Specifications Max Storage Weight 800 lbs. / 363 kg Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Equipment Dimensions & Weight Length 41.3 inches / 105 cm Width 33.5 inches / 85 cm Height 59 inches / 150 cm Equipment Weight 183 lbs. / 83 kg Delivery Dimensions & Weight Length 64 inches / 161.5 cm Width 43.5 inches / 110.5 cm Height 8 inches / 20 cm Delivery Weight 207 lbs. / 94 kg

Equipment Features Frame and Finish Heavy duty industrial grade steel tubing is welded in all structural areas to withstand the most severe environments. Powder coated frame. Rubber Feet Rubber foot pads are standard, provide product stability and help to prevent product movement. Weight Storage Can accommodate three (3) Fixed Barbells Equipment Specifications Max Storage Weight 500 lbs. / 227 kg Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Equipment Dimensions & Weight Length 37 inches / 93 cm Width 26 inches / 66 cm Height 42 inches / 107 cm Equipment Weight 128 lbs. / 57.8 kg Delivery Dimensions & Weight Length 48.6 inches / 123.5 cm Width 38.8 inches / 98.5 cm Height 7.9 inches / 20 cm Delivery Weight 141 lbs. / 64 kg

Equipment Features Bar Catches N/A Rubber Feet Rubber foot pads are standard, provide product stability and help to prevent product movement. Frame and Finish Heavy-duty industrial-grade steel tubing is welded in all structural areas to withstand the most severe environments. Powder-coated frame. Equipment Specifications Maximum User Weight 350 lb / 159 kg Max Lift Load Capacity 100 lb / 45 kg Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Workout Area (L x W) 77" x 52" / 195.6 cm x 132 cm Equipment Dimensions & Weight Length 53 inches / 133.5 cm Width 40 inches / 101.5 cm Height 30 inches / 76 cm Equipment Weight 141 lb / 64 kg Delivery Dimensions & Weight Length Box 1 = 55 inches / 139.5 cm Width Box 1 = 42.7 inches / 108.5 cm Height Box 1 = 10.6 inches / 27 cm Delivery Weight 168.3 lb / 76.4 kg Length 2 Box 2 = 22.2 inches / 56.5 cm Width 2 (cm/inches) Box 2 = 13.6 inches / 34.5 cm Height 2 (cm/inches) Box 2 = 9.3 inches / 23.5 cm

Equipment Features Rubber Feet Yes Instructional placard Yes Frame and Finish Oversized tubes are 11-gauge steel and fully welded in all structural areas. Powder-coated frames. Adjustments Two (2) Carriage stop positions; three (3) seat position angles Equipment Specifications Standard Color- Carriage Metallic Ash Standard Upholstery Colours Black Mahogany Imperial Blue Paprika Graphite Royal Blue Slate American Beauty Red Terracotta Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Weight Storage Horns 4 Max Load Weight 490 kg/1080 lb Starting Weight 62 kg/136 lb Equipment Dimensions & Weight Length 239 cm / 94 inches Width 145 cm / 57 inches Height 144 cm / 56,5 inches Equipment Weight 252 kg / 556 lbs Product Working Area Dimensions Length 277 cm / 109 inches Width 262 cm / 103 inches Height 159 cm / 62,5 inches

Equipment Features Frame and Finish Heavy duty industrial grade steel tubing is welded in all structural areas to withstand the most severe environments. Powder coated frame. Rubber Feet Rubber foot pads are standard, provide product stability and help to prevent product movement. Weight Storage Qty. (8), 1.5 inch / 38 mm diameter, effective length of 6.9 inches / 175 mm each Equipment Specifications Maximum User Weight 350 lbs. / 159 kg Max Lift Load Capacity 500 lbs. / 227 kg Max Storage Weight 1,760 lbs. / 800 kg Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Workout Area (L x W) 107 inches / 272 cm x 108 inches / 274.3 cm Equipment Dimensions & Weight Length 83 inches / 210 cm Width 65 inches / 165 cm Height 51.2 inches / 130 cm Equipment Weight 217 lb. / 98.4 kg Delivery Dimensions & Weight Length Box 1 = 53 inches / 134.5 cm, Box 2 = 43.5 inches / 110.5 cm Width Box 1 = 34 inches / 85.5 cm, Box 2 = 30.5 cm / 30.5 cm Height Box 1 = 11 inches / 27 cm, Box 2 = 9.5 inches / 24 cm Delivery Weight Box 1 = 212.5 lbs. / 96.4 kg, Box 2 = 25 lbs. / 11.4 kg

Equipment Features Rubber Feet Standard Upholstery Premium-quality upholstery with Beautyguard protective topcoat finish. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Double-layer slipcover in appropriate high wear areas. Double stitching on all seams. Frame and Finish 11 gauge (.120") 2x4-inch Flat Oval (FLOV) bent electro weld steel tubing. Electrostatically applied, heat-cured powder coat. Equipment Specifications Maximum User Weight 350 lbs / 159 kg Max Lift Load Capacity 400 lb / 182 kg Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Workout Area (L x W) 80 L x 72 W Equipment Dimensions & Weight Length 55 in /140 cm Width 29.5 in / 75 cm Height 18 in / 46 cm Equipment Weight 106 lbs / 48 kg Delivery Dimensions & Weight Length Box 1 (Frame) = 56 in / 141.5 cm , Box 2 (Upholstered Pads) = 38 in / 96.5 cm Width Box 1 = 17 in / 42.5 cm, Box 2 - 12.4 in / 31.5 cm Height Box 1 = 11 in / 27 cm, Box 2 = 8 in / 20.5 cm Delivery Weight Box 1 = 101 lbs / 45.7 kg, Box 2 = 20 lbs / 9 kg

Equipment Features Instructional placard Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. Upholstery Premium-quality 3D urethane moulded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double topstitching on all seams. Rubber Feet Yes Adjustments Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting colour for ease of use. Water Bottle and Accessories Holder The drink and accessory holder features a large open, even surfaced area which is easily accessible and easy to keep clean. Bearings and Pivot Points Oversized, linear, re-circulating ball bearings run on case-hardened shafts, and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilising either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications. Pulleys and Cables Glass-fibre reinforced nylon pulleys for durability, with precision motor grade ball bearing pulleys. All cables consist of 7 x 19-strand aircraft cable coated with black pressure-extruded nylon (either 3/16-inch cable coated to 1/4 inch or 1/8-inch cable coated to 3/16 inch). The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimise chance of external interference. Frame and Finish The frame is 11 gauge (0.3 cm; 0.120 in) 2x10 cm (2x4 in) electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The abrasive grit pre-finish is followed by an electrostatically applied, heat-cured powder coat. General Features Movement arm features low, forward-set pivot for optimal motion path. Angled triple-grip handles create wide range of user start positions; no chest pad adjustments needed. Weight Stack 109 kg (240 lbs). Equipment Specifications Incremental Add-on Weight 5 lbs / 2.3 kg Standard Shroud Colour Pacific Blue Black Weight Stack (kg/lbs) 240 lbs / 109 kg Standard Upholstery Colours All Spice American Beauty Black Blue Jay Burgundy Deep Clay Grey Hunter Green Navy New Purple Regal Blue Slate Standard Frame Colours Gloss Metallic Silver Metallic Ash Desert Bronze Black Magic Gloss Gloss White Black Pearl Workout Area (L x W) 132 L x 150 W / 52 L x 59 W Weight Stack(s) Weight Stack(s) Units have fully shrouded weight stacks in full compliance with ASTM and EN standards. Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings. The plates feature a black painted protective finish. Guide rods are precision centreless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation. The weight stack is elevated to facilitate user pin selection from seated position. Equipment Dimensions & Weight Length 51 inches / 130 cm Width 49 inches / 125 cm Height 59 inches / 150 cm Machine Weight (base equipment) (kg/lbs) 508 lbs / 230 kg Delivery Dimensions & Weight Delivery Weight 580 / 265 Regulatory EN957 EN957 ASTM Yes