Loctite

LOCTITE 270 is a high-strength threadlocker for maximum efficacy in the securing and sealing of bolts, nuts and studs to prevent loosening due to vibration. The product serves to permanently lock assemblies which must not come loose. It works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids. Can be disassembled by heating to 300°C.

LOCTITE 554 is a red, methacrylate ester acrylic thread sealant liquid which provides maximum solvent resistance on threaded fittings and pipes up to 2 in (50 mm) in diameter. The sealant is used in place of specialty non-hardening compounds, litharge, glycerin and sealing tape. It is suited to temperatures up to +300.2 °F (+149 °C).

Off-white, low disassembly strength methacrylate thread sealant, ideal for sealing coarse threads up to M80/R3”. UL approved. LOCTITE 567 is an off-white, low strength, thixotropic methacrylate thread sealant. It cures in the absence of air and by contact with metals when confined within threads up to M80/R3”. It is best suited for use on coarse metal threads Its breakaway torque rating is 1.7Nm. Viscosity is 280,000 - 800,000 mPa·s Service temperature -55 to +150ºC. UL approved.

Gasketing Product - general purpose. Ideal for use on machined and rigid metal flanges LOCTITE 574 seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. It provides resistance to low pressures immediately after assembly. Typically used as a form-in-place gasket on rigid flanged connections. The nature of LOCTITE 574 reduces the migration of liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance. Ideal for use on rigid metal parts, e.g. cast iron components and pump housings High oil resistance Excellent water and glycol resistance

Threadlocking Adhesive - medium strength. General purpose. Suitable for all metal threaded assemblies. LOCTITE 243 is a general purpose threadlocker of medium bond strength. This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

LOCTITE 242 is a medium strength, medium viscosity, methacrylate-based threadlocking adhesive offering general purpose qualities. The product provides quick fixture times on steel, brass and stainless steel of 5, 15 and 20 min respectively. LOCTITE 242 is thixotropic to prevent migration after application and is intended for fasteners that require normal disassembly with standard hand tools. Your benefits: Medium strength Medium viscosity Quick fixture time Thixotropic to reduce adhesive migration

LOCTITE 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminium or brass. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. t is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids. Your benefits : Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screws Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses Permits disassembly with hand tools Especially suited to small thread sizes

Thread Sealant - high strength. Especially suitable for copper and brass fittings. Slow curing. LOCTITE 586 is a high-strength sealant for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies. The product cures slowly and provide a high-pressure seal for metal pipes and fittings. It exhibits excellent characteristics on brass and is also suitable for copper. It will not creep, shrink or block systems by shredding.