Location:
To access account and manage orders
Search
Specialty Lubricants Paste lubrication up to +230 Degrees Centigrade (+446 F), dry lubrication up to +450 Degrees Centigrade (+842 F) " Good water resistance " Good vitalization properties " Compatible with many types of elastomers and plastics (test for compatibility) MOLYKOTE M 77 Solid Lubricant Paste: Solid lubricant paste with silicone carrier oil APPLICATIONS MOLYKOTE M77 Solid Lubricant Paste with Silicone Carrier Oil. Consists of polyphenyl methylpolyphenyl methyl siloxane (silicone base) oil, lithium stearate, and molybdenum disulphide (MoS2, "moly"), plus a few percent of a secret "vendor proprietary ingredient". Contains molybdenum disulphide ("Moly") for excellent metal/metal contact lubrication. Silicone based so it is safe for most plastics and rubbers. Most other Moly lubes are mineral/petroleum oil based and can affect polymers. Protects against fretting corrosion.
Molykote G N Plus Anti Seize Paste Solid lubricant paste for the assembly and running-in of metal components. Applications : Press fit production of all types of machine elements, as a running in lubricant for new machines and gear boxes. Permanent lubrication of machine elements that are moved only rarely or slightly and also for drilling, sawing and thread cutting. Used successfully for lubricating threaded spindles, splined shafts, toothed gears, worm and transmission gears, screws, valves, pumps, machine-tool guides and also for the tightening and fitting of roller bearings, washers, wheels, flanges and bolts.
MOLYKOTE 111 Compound is a one component, silicone oil that is used for damping, sealing, and lubricating outdoor equipment, pressure systems, electrical equipment, and used as an anti-stick. It provides low volatility, low vapor pressure, wide service temperature range, and water resistance. Features : Excellent water resistance Compatible with many plastics and elastomers Low vapor pressure Low volatility Meets several global standards for water contact. Applications : Lubrication for control and pressure plug valves, water softener and faucet valves.Sealant for vacuum and pressure systems. Sealant for outdoor equipment (also shipboard) subject to washing and harsh environmental exposure: meters, electrical service entrance and underground connections. Damping medium for dash pots in electrical and electronic equipment.Used as an anti-stick and a sealant for transformer gasket and equipment enclosures. It prevents gaskets from sticking to metal and resists weathering and water washout.Rubber and plastic O-rings, gaskets and seals.
Molykote PG-75 Suitable for long-term lubricationGood low-temperature characteristics (usable down to -40°C)Very low coefficient of frictionCompatible with many plastics and elastomersGood plastic & rubber compatibilityHigh speed performanceLow speed performanceLow temperature performance High Performance GreaseLubricating grease for plastic/plastic and plastic/metal combinations with slow to medium-fast movements and light loads. Molykote PG-75 High Performance Grease is used on vehicle trackrod joints Used on control cables, gear boxes, worms, planetary gearsand other plastic/plastic and plastic/metal contacts in automotive and electrical appliances Electromechanical actuators such as automotive sun roof tracks, windowmechanism, HVAC. Specification Writers: These values are not intended for use in preparing specifications. Please contact your local DowCorning sales office or your Global Dow Corning Connection before writing specifications on this product. Suitable for long-term lubrication Good low temperature characteristics (usable down to -40C) Very low coefficient of friction Compatible with many plastics and elastomers
Molykote G-4500 Multi-Purpose Synthetic Grease Primary Use – Long-term lubrication for moderate loads at higher speeds, especially for incidental food-contact applications or where a white or H-1 grease is preferred. Special Characteristics – Acceptable under FDA 21 CFR 178.3570 for use in applications with possible incidental food contact and other applications operating under moderate to high loads and speeds. Formulated to provide higher load carrying capacity, greater wear resistance and longer service life compared with conventional petroleum based lubricants. Physical Form – Synthetic NLGI 2 grease, consisting of a unique formulation that includes polyalphaolefin (PAO) base oil, aluminum complex thickener and polytetrafluoroethylene (PTFE) as well as other solid lubricants. Applications – Lubricating mixers, motors, conveyors, low-temperature equipment, packaging machines and many other applications in or out of the food processing industry.
Molykote Longterm W2 White lubricating grease for metal/metal combinations with slow to fast movements and medium loads. Applications: Used successfully for bearings in machinery used in the food and pharmaceutical industries, in textile and paper making machines, domestic appliances and mechanical precision instruments. Features: Good load-carrying capacity; Suitable for long-term lubrication since it has no tendency to oxidize; Wear protection through solid lubricants; Good adhesion strength due to incorporated adhesion improver; Good corrosion protection; Prevents the formation of frictional corrosion.
Molykote BR 2 Plus Grease is a high-performance grease with solid lubricants for metal/metal combinations involving slow to fast movements, particularly with medium to high loads Application : Used successfully on roller bearings, plain bearings, sliding guides, roller guides, ball-and-socket joints, splined shafts and threaded spindles. Molykote BR 2 plus Typical Properties : Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product Molykote BR 2 plus Description : Molykote BR-2 Plus High-Performance Grease is a lithium soap thickened, mineral oil grease fortified with MoS2 and other solid lubricants. It is a heavy duty, extreme pressure lubricant with high load carrying capability at moderate to high speeds
MOLYKOTE 41 Extreme High Temperature Bearing Grease Extreme High Temperature Bearing Grease Black is a thickened silicone oil that is used for lubricating plastics, rubber, and anti-friction bearings. It is recommended for oven conveyor bearings, governor linkage for steam turbines, wheel bearings for oven carts, ball and socket connections for power insulators. It provides good shear stability, wide service temperature range, inertness, and resistance to corrosion, moisture, and oxidation. Molykote 41 Extreme High Temperature Bearing Grease Antifriction bearings of high-temperature equipment Oven conveyor bearings, Wheel bearings of core oven carts, Governor linkage of steam turbines, Ball and socket connections of power insulators.
Grease MOLYKOTE LONGTERM 2 PLUS is a long - acting lubricant and specially developed for bearings subjected to very high loads. It contains, among other high-efficiency components Exceptional adhesion Good resistance against water washing High resistance to high loads Under high stresses, A film sliding this solid lubricant onto the surfaces, forming an emergency lubrication film when grease fails. Longer runs between relubrication Less maintenance Increased safety at work, Increasing yield. Even under the highest surface loads, MOLYKOTE LONGTERM 2 PLUS reduces friction, metal contact and consequently excessive wear. Based on its adhesion and sealing properties, MOLYKOTE LONGTERM 2 PLUS grease can be safely applied as a long-term lubricant under unfavourable environmental conditions (moisture, dust, Vibration, water jet, etc.). It improves considerably the softening conditions and favours a quieter operation of the machines. MOLYKOTE LONGTERM 2 PLUS grease is applied in rolling and sliding bearings as a maximum load lubricant.
Light-colored adhesive grease paste with solid lubricants for metal friction combinations. Features : High load-carrying capacity Particularly adhesive Particularly resistant to wash-out by water and metal machining emulsion Prevents stick-slip Good corrosion protection Excellent protection against galling Applications : Sliding surfaces exposed to high pressure loadings and subject to the influence of water of metal machining emulsions. ecommended and successfully used by leading clamping-element manufacturers, especially for chucks on metal processing machines. Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales representative prior to writing specifications on this product. Composion: Mineral oil Synthetic oil Lithium soap Solid lubricant Adhesion improver How to Use : Sliding surfaces should be cleaned. The paste should then be applied with a suitable brush, rag or grease gun. It should not be mixed with greases or oils.
Molykote M-30 : Containing a solid lubricant, synthetic oil chains operate at high temperatures to lubricate. Applications : Is used for the lubrication of chains and conveyor operate at high temperatures. Composition : Syntteetinen oil, POE / PAG, molybdenum disulphide (MoS2), a disintegrating agent Technical information : More ground pressure resistance Reduces friction and wear To improve the break-in period Emergency lubrication Feature Not penny even at high temperatures
Molykote 55 O-ring Grease is a silicone-based material that helps ensure positive lubrication and sealing by slightly swelling rubber O-rings and seals. This product is heat stable and oxidation resistant and is serviceable from approximately -65 to 175C (-85 to 347F). Features :- High oxidation resistance Wide service temperature range [65C to +175C (-85F to +347F)]Good corrosion protection Compatible with many plastics and elastomers Application : – Dynamic lubrication between rubber and metal parts in pneumatic systems in aircraft, automotive and general industrial applications Pack Size :- 100 gm tube. Industry :- Electronics
Low evaporation Superior oxidation resistance Broad range of service temperatures Superior low-temperature characteristics Compatible with most plastics Water-resistant Good oxidation resistance Good plastic & rubber compatibility Good water resistance High temperature performance Wide temperature range No intentional polytetrafluoroethylene (PTFE) or per- and polyfluoroalkyl substances (PFAS)
MOLYKOTE 1000 Solid lubricant paste Applications: Molykote 1000 is Suitable for bolted joints that are subjected to high temperatures up to 650 Degrees Centigrade and to corrosive effects, and which, after assembling and the initial operation, have to be re-tightened or disconnected. In order to ensure constant pre-stressing forces, uniform and steady coefficients of friction of the lubricant are necessary. Molykote 1000 is used successfully for cylinder head bolts, nozzle head screws of plastic injection moulding machines, bolted joints in the chemical industry, and also for the tension rings of centrifuges. MOLYKOTE 1000 Solid lubricant paste FEATURES: Molykote 1000 Can be used over a wide range of temperature - 30 Degrees Centigrade to + 650 Degrees Centigrade, High load-carrying capacity, Enables non destructive dismantling. Even after long use at high temperatures Coefficient of friction unchanged in the area of oiled bolts, even after several bolt re-tightening and loosening processes.
Dow MOLYKOT D 321 R Anti-friction Coating Gray-Black is an air-curing, solid, dry lubricant that is used for metal to metal applications that have high loads and slow to medium fast movements. It can also be used to improve the running-in process, permanently lubricating stressed sliding guides, or on high voltage switches. It provides resistance against ageing and stick-slips. 312 g Aerosol.Suitable for the permanent lubrication of highly stressed sliding guides with low sliding speeds, oscillating movements or intermittent operation. Used successfully for cylinder-head bolts, toaster guides, car mirror adjustment mechanisms, high voltage switches, for the running-in of highly stressed gear wheels. Cure Time: 5min @ 23 °C Service Temperature: -180 to 450 °C
A PAO based anti-seize paste formulated with solid lubricants such as graphite and zirconium dioxide. Applications .Prevents seizure of screws used at high temperatures. Approved for use by many manufacturers of set screws used in power plant turbines, and manufacturers of steam valve Joints. Assembly & Run-in; High Temp & Alloys; Threads, Threaded Connections Features & Benefits :Highly pure (less than 500mg of sulphur, less than 200mg of chlorine and fluorine per kg of lubricant); Can be used at temperatures up to +1400°C; Coefficient of friction in the range of oiled bolts; Low scatter of pre-stressing forces on tightening; Avoidance of stress cracks and solder brittleness; Enables non-destructive loosening of bolted joints even after long use at high temperatures.
Molykote HSC Plus Paste MOLYKOTE HSC Plus Paste are greaselike materials containing a high concentration of solid lubricants dispersed in oil for convenient application.For metal/metal combinations that are subjected to high temperatures andfrictional contacts which, typically for bolted joints, are free from lead or nickel."Suitable for lubrication points with low speeds, subjected to high temperaturesand corrosive effects, and also require a low and constant coefficient of friction.As a contact lubricant for electrically conducting components."Used successfully for stud bolts of gas and steam turbines, stud bolts ofturbochargers of diesel engines, flanged connections in chemical andpetrochemical plants.
