Industrial Chemicals

Adhesive, also known as glue, cement, mucilage, or paste, is any non-metallic substance applied to one or both surfaces of two separate items that binds them together and resists their separation. Adhesives are used for bonding materials in various industries, such as electronics, medical, food, optical, chemical and oil and gas industries to bond a range of metals, ceramics, glass, plastics, rubbers and composites. Construction adhesive is a general-purpose adhesive used for attaching drywall, tile, molding, and fixtures to walls, ceilings, and floors. It is most commonly available in tubes intended for use with a caulking gun.

Thread Sealant - medium strength. For fine threads in hydraulic, pneumatic and general fittings. Fast curing.LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part. Ideal for fine threads as used in hydraulic, pneumatic & general fittings Suitable for metal threads only Instant low-pressure seal Resistant to fuel, oil, coolants and hydraulic fluids Locks connection against vibration loosening

LOCTITE 270 is a high-strength threadlocker for maximum efficacy in the securing and sealing of bolts, nuts and studs to prevent loosening due to vibration. The product serves to permanently lock assemblies which must not come loose. It works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids. Can be disassembled by heating to 300°C.

Threadlocking Adhesive - medium strength. General purpose. Suitable for all metal threaded assemblies. LOCTITE 243 is a general purpose threadlocker of medium bond strength. This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids.

LOCTITE 242 is a medium strength, medium viscosity, methacrylate-based threadlocking adhesive offering general purpose qualities. The product provides quick fixture times on steel, brass and stainless steel of 5, 15 and 20 min respectively. LOCTITE 242 is thixotropic to prevent migration after application and is intended for fasteners that require normal disassembly with standard hand tools. Your benefits: Medium strength Medium viscosity Quick fixture time Thixotropic to reduce adhesive migration

LOCTITE 554 is a red, methacrylate ester acrylic thread sealant liquid which provides maximum solvent resistance on threaded fittings and pipes up to 2 in (50 mm) in diameter. The sealant is used in place of specialty non-hardening compounds, litharge, glycerin and sealing tape. It is suited to temperatures up to +300.2 °F (+149 °C).

LOCTITE 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminium or brass. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. t is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids. Your benefits : Ideal for low-strength threadlocking of adjusting screws, countersunk head screws and set screws Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses Permits disassembly with hand tools Especially suited to small thread sizes

Gasketing Product - general purpose. Ideal for use on machined and rigid metal flanges LOCTITE 574 seals close-fitting joints between rigid metal faces and flanges. The product cures when confined in the absence of air between close-fitting metal surfaces. It provides resistance to low pressures immediately after assembly. Typically used as a form-in-place gasket on rigid flanged connections. The nature of LOCTITE 574 reduces the migration of liquid product after application to the substrate. It has a high oil tolerance and excellent water and glycol resistance. Ideal for use on rigid metal parts, e.g. cast iron components and pump housings High oil resistance Excellent water and glycol resistance

Boric acid is a natural mineral that is generally safe to use indoors and outdoors, including around food preparation areas. However, long-term ingestion of boric acid can cause vomiting, nausea, diarrhea, stomach pain, and other health issues.

WE are manufacturing Quartz silica powder. we have our own brand name "Silica 10".

Activated carbon, also known as activated charcoal, is a porous material that's used for many applications, including filtering water and air, treating wastewater, and as a catalyst.

Dicalcium phosphate (CaHPO₄), also known as dibasic calcium phosphate or calcium monohydrogen phosphate, is a calcium phosphate compound with a molar mass of 136.06 g/mol and a density of 2.93 g/cm³. The "di" in its name comes from the removal of two protons from phosphoric acid (H₃PO₄) to form the HPO₄2– anion. Dicalcium phosphate is usually synthetic, but there are some small, limited deposits from natural sources, such as monetite. Dicalcium phosphate might be obtained from roasting bones, but most bone sources of dicalcium phosphate are precipitated by using strong acids prohibited for organic production.

Precipitated silica is a silica (SiO2) produced by precipitation from a solution containing silicate salts. The production of precipitated silica starts with the reaction of an alkaline silicate solution with a mineral acid. Sulfuric acid and sodium silicate solutions are added simultaneously with agitation to water. Precipitation is carried out under alkaline conditions. The choice of agitation, duration of precipitation, the addition rate of reactants, their temperature and concentration, and pH can vary the properties of the silica. The formation of a gel stage is avoided by stirring at elevated temperatures. The resulting white precipitate is filtered, washed and dried in the manufacturing process.

Bentonite is a clay consisting mainly of smectite minerals, commonly formed by decomposition of volcanic ash or tuff, or sometimes from other igneous or sedimentary rocks. Bentonite is a very plastic clay that shrinks (or swells) markedly in response to the removal (or addition) of water.

Calcium sulfate, or CaSO4, is a naturally occurring calcium salt with many uses: Appearance Calcium sulfate is a white or colorless powder or crystalline solid that can sometimes have a blue, gray, or reddish tinge.

The catechin which we are supplying is extracted in aqueous medium from edible plant source- Acacia Catechu, Cashew Nut Testa and Gambier and it is free from solvents and heavy metals. The purity is 65%. However, product of purity >90% can be supplied but with a price. The specification and HPLC report can be provided on request.Total Ash content is 0.81%(w/w). Acis insoluble is 0%(w/w). The Catechin paste (Lugdi) can be provided which used in making of Kattha which is having water content 55%(w/w).

Fast hydration Guar Gum (Ind grade) is specially modified to hydrate quickly and easily in water. It’s like regular guar gum, but it quickly dissolves in water and is natural water-soluble chemical. It is a versatile ingredient and can be used in a wide variety of industries such as food, pharmaceuticals, etc.

Distilled soya fatty acid is a product obtained from soybean oil that is split and vacuum distilled. It can be a clear fluid or solid yellow in color at room temperature and has a melting point of more than 25 °C. Here are some of its characteristics: Composition: Distilled soya fatty acid is rich in linoleic acid and low in oleic acid. Uses: It is used in the manufacturing of paints, varnishes, coatings, resins, plastic and rubber chemicals, and more. Physical state: It is a liquid. Color: It is a clear yellow liquid. Packaging: It is packaged in MS/HDPE barrels and bulk. Acid value: It has an acid value of 195–202. Iodine value: It has an iodine value of at least 125. Saponification value: It has a saponification value of 196–203.

Cyanoacrylates are a family of strong fast-acting adhesives with industrial, medical, and household uses. They are derived from ethyl cyanoacrylate and related esters. Specific cyanoacrylates include methyl 2-cyanoacrylate (MCA), ethyl 2-cyanoacrylate (ECA, commonly sold under trade names such as "Super Glue" and "Krazy Glue"), n-butyl cyanoacrylate (n-BCA), octyl cyanoacrylate, and 2-octyl cyanoacrylate (used in medical, veterinary and first aid applications). Cyanoacrylate adhesives are sometimes known generically as instant glues, power glues or superglues. The abbreviation "CA" is commonly used for industrial grade cyanoacrylate.

The tannins which we are supplying, are extracted in aqueous medium from edible palnt sources- Acacia Catectu and Cashew Nut Testa. The nature of tannin is condenced. The product is green and free from heavy metals and solvents . The purity of tannin is 50-60%. The purity has been ascertained by trtrimetricc method with potassiun permanganate. The specification can be provided on request. The total solid content is around 90%. The moisture content is 10%. The total soluble in water is around 85%. The ash content is 2.6%.

Dehydrated castor oil (DCO) is a yellow, oily liquid with a distinct odor that's used in a variety of industries: Drying oil, DCO is a drying oil with similar properties to tung oil. It gives dry paint films a fine gloss, toughness, flexibility, adhesion, and chemical and water resistance. Applications - DCO is used in paints, varnishes, enamel coatings, corrosion resistant coatings, marine paints, wire enamels, resins, inks, and more. It can also be used as a primary binder for enamels, house paints, sealants, caulks, and inks. Production DCO is made by removing about 5% of the chemically combined water from castor oil. The dehydration process turns the ricinoleic acid in castor oil into linoleic acid.