Motors

General purpose motors with aluminum housing, IP66 protection and C4 painting system are suitable for a wide range of standard drive tasks in industrial environments and humid atmospheres. The design and architecture of the motors ensure maximum flexibility and minimum installation effort. Due to their particularly low weight, they are predestined for applications in pumps, fans and compressors.

Overview Available for both wet & dry pit applications. Wet pit motors use effluent for cooling and can run 15 minutes in air. Dry pit motors are designed to run continuously in air or submerged when properly applied. Sizes 0.75 - 74.57 kW, 1 - 100 Hp totally enclosed, three phase 0.75 - 3.73 kW, 1 - 5 Hp totally enclosed, single phase

Overview Custom Immersible motors are designed for use in non-hazardous area dry pit applications where the possibility of flooding exists. Sizes 3.73 - 186 kW, 5 - 250 Hp totally enclosed, three phase

Specifications Frames: 56 to 355L Rating: 0.093 to 315.0 kW Poles: 2, 4, 6 & 8 Mountings: B3, B5, B14 & combinations Protection: IP55 Enclosure: TEFC

Overview UL & CSA approved for Class I, Group D; Class I, Group D, Class II, Group F & G; Class I, Group C & D, Class II Group F & G. Sizes 2.2 - 111 kW, 3 - 150 Hp totally enclosed, three phase

Specifications Frames: 100 to 180L Rating: 0.55 to 15.0 kW Poles: 4, 6 & 8 Mountings: B3, B5, B14, Pad & combinations Protection: IP55 Enclosure: TENV, TEFC with clean flow Applications: Ring, Loom, Carding, Ginning & Spinning

Specifications Frames: 71 to 355L Rating: 0.12 to 150.0 kW Poles: 4/2, 8/4, 6/4, 8/6 & others Mountings: B3, B5, B14 & combinations Protection: IP55 Enclosure: TEFC

This ASD Ultra technology is optimized for performance in metal processing, plastic extrusion, winders, test stands, crane and hoist and material handling. All are applications that require motors that can handle variable torque applications. Five-year warranty comes standard. This comprehensive warranty program covers both mechanical and NEMA Premium efficiency performance (60 months operational/66 months maximum from shipment). Designed for scalar or vector drive Infinite:1 constant torque from zero to base speed NEMA Premium efficiency at 60 Hz sinewave Constant horsepower 1.5 times base speed Runs at or below Class F temperature rise Exceeds MG1-31 standards with GEGARD insulation system Technical Scope 1.5-300 HP, 1800 RPM 230/460, 460, 575V / 60 Hz TEFC, TEBC, TENV (IP55) Frame sizes: 143TC-449T NEMA, IEEE 841, IEEE 112B

Overview Close coupled pump motors include over-sized ball bearings with locked drive end construction to minimize endplay. Sizes 0.37 - 56 kW, 0.5 - 75 Hp totally enclosed, three phase 0.37 - 74.5 kW, 0.5 - 100 Hp open drip proof, three phase 0.33 - 11 kW, 0.33 - 15 Hp totally enclosed, single phase 0.37 - 11 kW, 0.5 - 15 Hp open drip proof, single phase

MARATHON Electric presents CHALLENGER Series TEFC Squirrel cage motors with excellent product features and outstanding performance parameters. Range 0.25 kW to 400 kW Frame IEC 80 to 355 in cast iron Mounting Foot/Flange/Face Pole 2 to 8 Others on request Frequency 50 or 60 Hz Ambient -40 to 65 C Others on request Protection IP 55 Others on request Feature Complying to all international standards Totally enclosed fan cooled sq. cage Alpower Aluminium Body squirrel cage motors upto IEC frame 180L Challenger series squirrel cage motors Integral feet rugged cast iron construction Energy efficient eff2/eff1 Rationalized product features Eff 1 in line with is:12615 / CMEP 600% max. stg. current Rtd / btd ( frame 280 onward ) Low noise level 60hz. supply ce / csa marking Class hinsulation 55 deg. ambient APPROVED BY MAJOR CONSULTANTS LIKE NTPC / BHEL / EIL

Overview Designed for environments where washdown cleaning occurs with caustic solutions and high-pressure sprays. Sizes 0.37 - 11 kW, 0.5 - 15 Hp totally enclosed, three phase

Duke Pumping Solutions presents the 8" Submersible Motors Water Filled, a highly efficient and reliable solution for various water pumping applications. Designed to operate in submerged conditions, these motors deliver consistent performance with minimal maintenance. Ideal for use in agriculture, water supply systems, and industrial settings, our water-filled submersible motors are engineered for durability, energy efficiency, and long-term reliability. Key Features: Water-Cooled Design: Ensures optimal cooling and lubrication during operation. Energy-Efficient: Low energy consumption for cost-effective operation. Versatile Applications: Suitable for agricultural, industrial, and municipal water systems. Durability: Corrosion-resistant construction for long-lasting performance. Minimal Maintenance: Designed to reduce downtime and operational costs.

Overview Motor that meets and exceeds the requirements of IEEE Std. 841 - 2009 with the exception of using Mobility grease for exceptional roller bearing performance. Sizes 3.7 - 60 kW, 5 - 75 Hp totally enclosed, three phase

Specifications Frames: 112M to 160L Rating: 0.75 to 7.5 kW Poles: 4, 6 & 8 Mountings: B5 Protection: IP55 Enclosure: TENV, TEFC

Type Of Protection: Safe Area Power Range: 500 Kw To 4800Kw Frame Size: 400&Nbsp;- 710 Number Of Poles: 2,4, 6, 8 And More Ingress Protection: Ip 23, Ip 55 And Higher Thermical Class: 155 (F), 180 (H) Method Of Cooling: Tefc, Caca, Cacw

Duke Pumping Solutions introduces 6" Submersible Motors Water Filled, engineered for superior performance in submerged applications. These motors are ideal for deep well pumping, agricultural irrigation, and industrial water extraction. With a water-filled design for efficient cooling and lubrication, they ensure long-lasting, reliable operation in challenging conditions. Built for energy efficiency and minimal maintenance, our motors are the perfect solution for both domestic and international buyers seeking a cost-effective, high-performance water pumping system. Key Features: Water-Cooled Design: Ensures effective cooling and long-lasting performance. Energy-Efficient: Operates with lower power consumption, reducing overall energy costs. Compact & Durable: Designed for long service life even in harsh water conditions. Versatile Applications: Ideal for agriculture, industry, and municipal water supply systems. Low Maintenance: Requires minimal servicing, ensuring uninterrupted operation.

Duke Pumping Solutions offers high-performance 9" Submersible Motors designed to provide reliable and efficient operation in water-filled environments. These motors are ideal for agricultural, industrial, and municipal applications, offering seamless operation even in harsh conditions. Built to last and energy-efficient, our submersible motors are engineered to maximize pumping efficiency while ensuring long-term reliability. Key Features: Durable Construction: Corrosion-resistant materials and water-tight seals ensure the motor performs optimally in submerged conditions. Energy-Efficient: Reduced power consumption, contributing to lower operational costs. Versatile Applications: Suitable for agricultural, industrial, and water supply systems. Compact Design: Easy installation in confined spaces and small bore wells. Low Maintenance: Designed for minimal upkeep, ensuring consistent performance over time.

Duke Pumping Solutions offers 4" Submersible Motors Water Filled, a compact yet powerful solution for a wide range of water pumping applications. Designed to operate efficiently in submerged conditions, these motors are perfect for agricultural irrigation, small-scale water supply, and industrial systems. The water-filled cooling system ensures optimal performance, while their energy efficiency and minimal maintenance requirements make them a cost-effective choice for long-term use. Key Features: Water-Cooled: Self-lubricating and efficient cooling through water for extended motor life. Compact Design: Ideal for use in confined spaces like shallow wells and small boreholes. Energy Efficient: Reduced power consumption helps minimize operational costs. Durable: Built with corrosion-resistant materials to handle harsh water environments. Low Maintenance: Requires minimal servicing, ensuring consistent, hassle-free operation.

Duke Pumping Solutions offers high-performance 10″ Submersible Motors Water Filled, designed for efficient and reliable operation in a variety of water pumping applications. These motors are ideal for use in deep-well pumps, irrigation systems, and industrial water supply systems. With their water-filled construction, they are built for optimal cooling, longevity, and minimal maintenance. Trusted by industries worldwide, these motors provide superior performance in demanding environments. Key Benefits: Water-cooled design ensures long-term reliability and optimal performance. Energy-efficient motors reduce operational costs while maximizing output. Corrosion-resistant materials extend motor life, making them suitable for harsh environments. Versatile application in agriculture, water treatment plants, and industrial pumping systems. Minimal maintenance required due to the robust and efficient design.

Duke Pumping Solutions offers advanced 6″ PMSM Submersible Motors Water Filled [Smart], designed for high efficiency, superior performance, and minimal maintenance. These motors are perfect for deep well pumps, agricultural irrigation, and industrial water pumping systems. Equipped with Permanent Magnet Synchronous Motor (PMSM) technology, they offer precise control, reduced energy consumption, and enhanced reliability. Ideal for both residential and commercial applications, these smart water-filled motors are engineered for long-lasting performance in tough conditions. Energy-Efficient PMSM Technology: Reduces energy consumption and operational costs. Durable and Corrosion-Resistant: Designed to perform in harsh environments with resistance to corrosion. Smart Monitoring: Integrated smart features for real-time performance monitoring. Minimal Maintenance: Requires less upkeep with longer service intervals. Versatile Applications: Ideal for agricultural, municipal, and industrial water pumping systems.

Series:A Voltages:200-690V line and inverter operation Frame size:56 - 280 Frame construction:Aluminium and Cast iron Power output:0,06 - 90kW Degree of protection:IP55, IP56, IP65, IP66 Mounting arrangments:B3, V5, V6, B5, V1, V3, B35 Temperature class: 155 (F) according to 130 (B) or 180 (H) according to 155 (F) Efficiency class:IE2, IE3 Cooling method:IC411, IC410, IC416, IC418 Number of poles: 2,4, 6, 8, 10 Certificates: CE

Overview Motors designed with high performance neodymium magnets and low inertia rotor for faster acceleration. Sizes 0.4 - 40 Nm continuous torque Features 4x continuous torque Totally enclosed, CE/cURus A completely encapsulated winding allows heat to dissipate while protecting internal components from contamination. Multiple feedback types to fit a range of applications Suggested applications Cut-to-length, flying shear, machining, labeling, material handling, winding, 3D printing, robotics elevators, hoists

Rated Power 100kW Max Power 1250Nm Max Power 150~200KW Max Torque 500~2800Nm Max Speed 3000~10000rpm Cooling Method Water cooling IP Class IP 67

CAST IRON MOTORS Range 0.37 kW to 375 kW Frame IEC 80 to 355 in cast iron Mounting Foot/Flange/Face Pole 2 to 10 Others on request Frequency 50 or 60 Hz Ambient -40 to 65 C Others on request Protection IP 55 Others on request Feature Complying to all international standards ALUMINIUM MOTORS Range 0.18 kW to 15 kW Frame IEC 63 to 160 in Aluminum Mounting Foot/Flange/Face Pole 2 to 8 Other on request Frequency 50 or 60 Hz Ambient -40 to 50 C other on request Protection IP 55 other on request Feature CSA,CE approved

Overview Rolled steel round body frame construction constructed for easy drop in replacement opportunities. Sizes 3.7 - 372 kW, 5 - 500 Hp NEMA Features A variety of thermal protections, speed feedback devices, vibration detection, and non ventilated or ventilated enclosure types. Suggested applications Pulp and paper processing, extruders, conveyors, test stands, stamping press, crane and hoist, machine tools, etc.

Overview Designed for environments where washdown cleaning occurs. Sizes 0.25 - 15 kW, 0.33 - 20 Hp, single & three phase

Water Turbines - Mechanical Solutions Conveyor Systems - Mechanical Solutions Slurry Pumps - System Solutions Heat Exchangers - Components

Overview Motors designed with bonded neodymium magnets and medium inertia rotor for load inertia matching Sizes 1.2 - 134 Nm continuous torque Features 3x continuous torque Totally enclosed, CE/cURus A completely encapsulated winding allows heat to dissipate while protecting internal components from contamination. Multiple feedback types to fit a range of applications Suggested applications Cut-to-length, flying shear, machining, labeling, material handling, winding, robotics

Overview High torque design C, steel band frame and fan cover Sizes 1.5 - 7.5 kW, 2 - 10 Hp totally enclosed, three phase

Rated Power 30kW Max Power 100Nm Max Power 60~150KW Max Torque 200~900Nm Max Speed 4500~10000rpm Cooling Method Water cooling IP Class IP 67

Overview Innovative, NEMA drop-in replacement motor achieves leading efficiency and lower lifetime operational costs. Sizes 7.5 - 74.5 kW, 10 - 100 Hp totally enclosed - fan cooled, three phase

Overview IEC platform - highest power producing DC motor product available. The power dense low profile design makes it easy to displace the competition and integrate into almost any existing application. Sizes 22 - 1305 kW, 30 - 1,751 Hp IEC Features All enclosure types (DPBV,TEDC-AA, TEDC-AW), self monitoring brush wear system, rotatable rocker ring for easy brush change, reduced maintenance design technologies. Suggested applications Pulp and paper processing, extruders, conveyors, test stands, stamping press, crane and hoist, rolling mills, machine tools, ski lift, etc.

Type Of Protection: Safe Power Range: 0.01Kw To 5.5Kw Frame Size: 45 - 112 Number Of Poles: 4 Ingress Protection: Ip 55 Temperature Class: F Method Of Cooling: N/A

The 1PT0 special textile application motors are offered from 30kW -55kW in 4Pole. These highly energy efficient motors are made exclusively for textile ring frames with IC417 cooling. These motors are suitable for 415 V + 10%, 50Hz + 5% and an Ambient of 50C. Type : Textile Motors Output : 30 KW to 55 KW Poles : 4 Pole

Frame sizes 80 to 355 Construction: Cast Iron Frame sizes: 80 to 355 Output: 0.75kW to 400kW The W cast iron motor range covers products with outputs from as little as 0.75kW to 400kW in frame sizes 80 to 355L.They are suitable for use within a diverse range of applications from food and drink to china clay production. From roller table drives to refrigeration. Many applications often have adverse operating conditions including repeated starting and occasional overloading; the W cast iron range is well suited to these situations. A virtual go anywhere motor, this cast iron range has a full 3-year guarantee.

We are one of the most promising Suppliers of AC Motors in India for customized applications related to industrial power and electrical control equipment. We provide wide variety of Industrial AC & DC Motors at competitive prices. We offer squirrel cage, slip ring motors in TEFC / SPDP enclosures. We can also offer motors confirming to NEMA/ANSI standards on request apart from IEC/IS standards. They are duly type tested by accredited laboratories and routine tested by us. Our products are extremely energy efficient and durable. These products are made up of quality raw materials due to which they last longer We provide equipment tailored as per customer's requirements.

Overview Jet pump motor for residential and industrial applications Sizes 0.18 - 5.6 kW, 0.25 - 7.5 Hp totally enclosed, three phase 0.18 - 5.6 kW, 0.25 - 7.5 Hp open drip proof, three phase 0.09 - 3.7 kW, 0.13 - 5 Hp totally enclosed, single phase 0.09 - 5.6 kW, 0.13 - 7.5 Hp open drip proof, single phase

Overview High torque NEMA design A motor that exceeds NEMA design C torques. Sizes 3.7 - 373 kW, 5 - 500 Hp totally enclosed, three phase

Type Of Protection: Safe Area Power Range: 50 - 1.000 Kw Frame Size: 180 - 400 Number Of Poles: Bis 15.000 U/Min Ingress Protection: Ip 23 + Ip 55 Temperature Class: 150 (F), 180 (H) Method Of Cooling: Odp, Cacw

Overview Featuring Dodge short series brakes which are spring set, magnetically released power off type brakes integrally mounted to the motor for the most compact design Sizes 0.6 - 48 Nm continuous torque Features 3x continuous torque Totally enclosed, CE/cURus A compact segmented lamination design decreases overall length of the motor. A completely encapsulated winding allows heat to dissipate while protecting internal components from contamination. IP65 rated enclosure with optional shaft seal installed Suggested applications Cut-to-length, flying shear, machining, labeling, material handling, winding, 3D printing, robotics elevators, hoists

Type Of Protection: Safe Area Power Range: Special Design - Upon Request Frame Size: Special Design - Upon Request Ingress Protection: Ip 67 Temperature Class: F / H Method Of Cooling: N/A

Brand Wolong Morley Ex protection level Frame size Voltages Power output Frame construction Mounting arrangments Degree of protection Number of poles Temperature class Certificates Cooling method

Motors For Circular Saws And Wood Working Water-Cooled Special Motors Exciters For Permanent Magnets Exciters For Synchronous Machines Nuclear Power Motors Military Defence Motors Built-In Motors Motors For Ethylene Reactors Drilling Motors

PT series

Overview A base mounted on/off switch or starter with overload protection and three year warranty Sizes 152 - 355 mm, 6 - 14 in. wheel diameters, single and three phase Features A base mounted on/off switch or starter with overload protection and three year warranty Suggested applications Grinding

Overview Motors designed for optimized performance and longer life on critical above deck and below deck applications. Sizes .2-500Hp, .1-375kW: 115-690 VAC, TEFC, TENV, DPP, or TEWC: Spraytight, Watertight, Explosion Proof, Submersible Enclosures: NEMA & IEC frame sizes Features Motors meet all pertinent military specifications for fractional and integral AC motors including critical specifications pertaining to energy efficiency, sealed insulation, reduced weight, low airborne noise, and low structure-borne noise requirements. Specifications include: Mil-M-17059A, Mil-DTL-17060, Mil-S-901, Mil-STD-167-1, Mil- STD-740, Mil-STD-2037 Suggested applications Pumps, fans & air handling, deck equipment, underway replenishment equipment, thrusters, auxiliary propulsion, winches, capstans

Overview We offer an extensive line of General Purpose single phase open motors. In applications where only single phase power is utilized, these motors are available from 1/12 Hp through 10 Hp in ODP designs. Standard foot mounted configurations are available, as well as C-Face foot mounted and C-Face footless. These are also offered in 1/4 Hp through 5 Hp as Super-E Premium Efficient motors where energy savings is desired. Features Available from 1/12 Hp through 10 Hp in ODP designs Standard foot mounted configurations are available, as well as C-Face foot mounted and C-Face footless Also offered in 1/4 Hp through 3 Hp as Super-E Premium Efficient motors (to meet efficiency requirements for Small Motor Rule) Common Industries Aggregate & Cement Air Handling Chemical, Oil, & Gas Food, Beverage, & Pharmaceutical Paper & Forest Unit & Baggage Handling Common Applications Compressors Pumps Fans Conveyors Material Handling Machine Tool

Overview Our extensive line of General Purpose three phase open motors are available in cast iron and industrial steel. Designed for ""general purpose"" use means that these motors can be used in many applications. The Super E Motors (EM & CEM) provide NEMA Premium efficiency and are designed as standard to be inverter ready with wide variable torque speed ranges. Features Suitable for mounting in any position Ball bearings Heavy-gauge steel or cast-iron frames, and gasketed conduit boxes EM Super-E motors have NEMA Premium efficiency, Class F insulation, 1.15 service factor and 3 year warranty Motors with TR suffix have roller bearings for heavy belted loads Common Industries Aggregate & Cement Air Handling Chemical, Oil, & Gas Food, Beverage, & Pharmaceutical Paper & Forest Unit & Baggage Handling Common Applications Compressors Pumps Fans Conveyors Material Handling Machine Tool

MARATHON Electric introduces VD series motors tailor made for inverter drives having enhanced dielectric strength and adequate thermal margin suitable for variable speed application. PWM technology involving high switching frequency IGBT drive has enabled AC induction motors to be operated as variable speed drives. However, there had been a documented increase of premature winding failure for standard general purpose motors when operated with inverter drives. High and steep front voltage spikes (dV/dT) produced by latest generation IGBT drives associated with the phenomenon of voltage wave reflection due to longer cable length imposes stress on the motor winding resulting rapid ageing and deterioration of insulation system.

Overview RPM AC product line provides the ultimate in power density performance in either totally enclosed or open construction. RPM AC motors provide continuous Constant Torque performance (1000:1) from zero speed to base speed. Sizes 1.5 - 900 kW, 2 - 1200 Hp; DPFV, TEFC, TEBC, TEFC, three phase

Overview V*S master motors provide continuous constant torque performance (1000:1) across the entire speed range from zero speed to base speed. Sizes 0.25 - 372 kW, 1/3 - 500 Hp totally enclosed, three phase

Type Of Protection: Ex E, Ex N, Ex P, Ex D, Ex De Power Range: Up To 25Mw Frame Size: Up To 1700 Number Of Poles: All Ingress Protection: Ip 55 And Higher Temperature Class: 155 (F), 180 (H) Method Of Cooling: Tefc, Tewjc, Cacw

Overview Baldor's extensive line of General Purpose three phase motors are available in totally enclosed cast iron and industrial steel band for harsh applications. Designed for ""general purpose"" use means that these motors can be used in many applications. The Super E Motors (EM & CEM) provide NEMA Premium efficiency and are designed as standard to be inverter ready with wide variable torque speed ranges. Features Suitable for mounting in any position Ball bearings Heavy-gauge steel or cast-iron frames, and gasketed conduit boxes EM Super-E motors have NEMA Premium efficiency, Class F insulation, 1.15 service factor and 3 year warranty Motors with TR suffix have roller bearings for heavy belted loads Common Industries Aggregate & Cement Air Handling Chemical, Oil, & Gas Food, Beverage, & Pharmaceutical Paper & Forest Unit & Baggage Handling Common Applications Compressors Pumps Fans Conveyors Material Handling Machine Tool

Overview Motors designed for general unit handling applications Sizes 0.37 - 5.6 kW, 0.5 - 7.5 Hp totally enclosed, single and three phase Features Motors feature an oversized low profile top mounted conduit box on 56 and 140T frames that provides easy access for making connections. Footed frames include slotted feet for easy mounting on OEM conveyors. UL/CSA recognized and CE certified Suggested applications Conveyors, baggage handling, unit handling, packaging, door operators, elevators, hoists

Series:BD Voltages:200-1.100V line and inverter operationFrame size:315 - 560 Frame construction:Cast Iron Power output:375- 1.320kW Degree of protection:IP55, IP56, IP65, IP66 Mounting arrangements:B3, B5, V5, V6,V1, B35 Temperature class:155 (F) according to 130 (B) or 180 (H) according to 155 (F) Efficiency class:IE3 Cooling method:IC411, IC410, IC416, IC418 Number of poles:2, 4, 6, 8, 10 Certificates:CE

We have over 100 years of experience of direct current motor engineering and manufacturing experience utilizing superior design and quality control systems. These machines are a proven reliable lifeline to driven equipment and the backbone of thousands of operations around the world. Constructed in a rugged magnetic ring frame or cast-iron fabricated frame for severe industrial duty applications. Anti friction bearings with removable bearing cartridges and caps. Fully compliant class F insulation contains several components rated class H, unless otherwise specified. Strong Tungsten Inert Gas (TIG) welded commutator risers to the armature coil. Tape Reinforced Encapsulated Construction (TREC) of main field coils and commutating field coils is a process which strengthens, seals, and bonds the coil and pole into a single unit highly resistant to contaminants. Technical Scope 1-500 HP, 300-3600 RPM Armature voltage: 180, 240, 500 Field voltage: 300/150, 240/120 DPFG, DPFG-BV, TE, and Explosion proof

Duke Pumping Solutions presents high-performance, oil-filled 4" submersible motors designed for efficient and reliable operation in water and wastewater pumping applications. Engineered for durability and longevity, these motors are ideal for deep well pumps, borehole systems, and agricultural irrigation. The oil-filled design provides superior cooling, reducing the risk of overheating, and ensures enhanced motor life with minimal maintenance. With an emphasis on energy efficiency and cost-effectiveness, these motors deliver optimal performance while minimizing operating expenses. Features: Energy-Efficient: Helps reduce power consumption and operational costs. Durable & Corrosion-Resistant: Built to withstand harsh water conditions, including saline and mineral-rich water. Low Maintenance: Designed for long life and reliability, requiring minimal upkeep. Oil-Filled Design: Offers superior cooling, enhancing the motor’s lifespan. Versatile Applications: Suitable for agriculture, industrial, and municipal water pumping systems.

Overview Right angle and parallel shaft designs for industrial applications precision matched AC motor and gear ratios for optimized performance Sizes 0.56 - 124 Nm, 5 - 1,100 in.-lbs., output torque Features Each unit is factory filled with synthetic oil and lubricated for life maximum efficiency and reduced maintenance. Right angle configurations feature exclusive internal expansion bladder to keep lubrication in and contamination out. Suggested applications Material handling, packaging machinery, machine tools, conveyors, printing presses, commercial ovens, car washes

Series:EC Voltages:380 - 480V 50 or 60HzFrame size:Special Frame construction:Steel Power output:3,7kW max Degree of protection:IP55 - IP66 Mounting arrangements:Specific mounting arrangement Efficiency class:IE4 Speed range:200 - 1800 rpm Certificates:UL, cUL, CE

Type Of Protection: Safe Area - 200C, 400C, 600C Power Range: Up To 1000 Kw Frame Size: 80-500 Number Of Poles: 4 Ingress Protection: Up To 56 Temperature Class: 155 (F), 180 (H) Method Of Cooling: Tefc

Series No: Vacuum cleaner motor Power（W): 700-130 Outer diameter(mm): 70, 95 Voltage（V): 120 Frequency（Hz): 60 Pole（P): 2

Series KA5 H-OPTIM Voltages 2,3 - 11kV line and inverter operation Frame size 315 - 560 Frame construction Cast Iron Power output 180 - 2.250kW Degree of protection IP55 Mounting arrangements B3, V1, B35 Temperature class 155 (F) according to 130 (B) Number of poles 2 - 12 Cooling method IC411, IC410, IC416 Bearings Roling elements and sleeve bearings Certificates CE, Zone 2/22 (IEC), Cl. I Div.2 (NEC)

Specifications Frames: 90 to 355L Rating: 0.37 to 315.0 kW Poles: 2, 4, 6 & 8 Mountings: B3, B5, B14 & combinations Protection: IP55 Enclosure: Totally enclosed force cooled with 3ph fan motor

Specification ENCLOSURE - IS: 2148 RATING - IS :325 DIMENSION - IS:1231(FOOT) | IS: 2223(FLANGE) Range Frame : 90L 355L kW : 0.75 - 315 KW ( IN 4 POLES ) Increase Safety Specification DESIGN - IS: 6381 / IS:9628 RATING - IS :325 DIMENSION - IS:1231(FOOT) | IS: 2223(FLANGE) Range( Type 'e'/ 'n') Frame : E90L - E355L kW : 0.75 - 315 KW ( IN 4 POLES WITH T3 RTG. )

Overview HVAC motors designed for wet, high humidity environments Sizes 3.7 - 111 kW, 5 - 150 Hp totally enclosed, three phase

MP series

OXFORD Motors is proud to introduce the IP55 Metric Motor line of rugged, all-purpose motors. The cast iron,totally enclosed fan cooled IP55 construction makes this motor the preferred choice for almost any application in even the toughest environments.

Type Of Protection: On Request Power Range: Up To 25Mw Frame Size: Up To 1400 Number Of Poles: To Suit Ingress Protection: Ip 23, Ip 55 Temperature Class: 155 (F), 180 (H) Method Of Cooling: Caca, Cacw And Special&Nbsp;Cooling&Nbsp;

Frame sizes 63 to 355 Construction: Aluminium or Cast Iron Frame sizes: 63 to 355 Output: 0.07kW to 400kW Brook Crompton offers the most comprehensive range of brake motors with highly competitive delivery times, due in part to its innovative brake kit concept available on W motors.

Overview Motors designed and manufactured for normal, medium and high thrust applications. Sizes 1.11 - 56 kW, 1.5 - 75 Hp totally enclosed 1.49 - 45 kW, 2 - 60 Hp open drip proof

Overview Direct drive motor for HVAC applications Sizes 0.18 - 1.11 kW, 0.25 - 1.5 Hp open drip proof, single phase 0.19 - 7.5 kW, 0.25 - 10 Hp totally enclosed, open drip proof, three phase

Frame sizes 56 to 450 Construction: Aluminium or Cast Iron Frame sizes: 56 to 450 Output: 0.09kW to 900kW A high quality industrial standard range of electric motors with a Brook Crompton specification suitable for most industrial applications. The aluminium motors have outputs from 0.09kW to 18.5kW in frame sizes B-DA56 to A-DA160. The cast iron range of motors have outputs from 0.09kW to 900kW in frame sizes B-DF71M to BU-DF450, in either 2,4,6 or 8 pole speeds.

Series No. Garden Machine Cleaning Motor Voltage(V) 220 Power(W) 800W Frequency(Hz) 50 Outer diameter(mm) 76 Pole(P) 2

Series: KZX Frame size: 315 - 500 Voltages: 2,3 - 15kV line and inverter operation Power output: 375 - 1320kW Frame construction: Fabricated steel Mounting arrangments: B3, V1, B35 Degree of protection: IP55, IP56, IP65, IP66 Number of poles : 2 - 16 Temperature class: 155 (F) according to 130 (B) Certificates: CE Cooling method: IC411 Bearings: Roling elements and sleeve bearings

Overview Buffer designed for use with soft cloth wheels, guards and tool rests. Sizes 0.19 - 536 kW, 0.25 - 7.5 Hp, 0.25 - 7.5 Hp Features Steel frame enclosure and base Suggested applications Buffing

Frame size Power factor Power range Insulation Pole's Protection Voltages Cooling Frequencies Connection Duty Greasing Speed Housing

Series: KU Frame size: 400 - 1.200 Voltages: 2,3 - 15kV line and inverter operation Power output: 160 - 17.000kW Frame construction: Fabricated steel Mounting arrangments: B3, V1 Degree of protection: IP55, IP65 Number of poles : 2 - 24 Temperature class: 155 (F) according to 130 (B) Certificates: CE Cooling method: IC611 Bearings: Roling elements and sleeve bearings

Overview The Baldor-Reliance RPM AC direct drive cooling tower motor eliminates the maintenance and failure of mechanical components associated with traditional cooling tower systems by directly coupling the motor to the fan and controlling it with a unique drive. Sizes 5.6 - 186 kW, 7.5 - 250 Hp totally enclosed, three phase

Series No: Kitchen Soyabean Milk Machine MotorVoltage（V): 220 Power（W): 100 Frequency（Hz): 50 Outer diameter(mm): 42 Pole（P): 2

Overview Baldor-Reliance food safe motors, designed with smooth contours and advanced sealing, exceed IP69K for water to maximize motor life in high pressure, sanitary cleaning environments. Sizes 0.37 - 29 kW, 0.5 - 30 Hp, three phase 0.37 - 0.75 kW, 0.5 - 1 Hp, single phase