Ge Industrial Motors

This ASD Ultra technology is optimized for performance in metal processing, plastic extrusion, winders, test stands, crane and hoist and material handling. All are applications that require motors that can handle variable torque applications. Five-year warranty comes standard. This comprehensive warranty program covers both mechanical and NEMA Premium efficiency performance (60 months operational/66 months maximum from shipment). Designed for scalar or vector drive Infinite:1 constant torque from zero to base speed NEMA Premium efficiency at 60 Hz sinewave Constant horsepower 1.5 times base speed Runs at or below Class F temperature rise Exceeds MG1-31 standards with GEGARD insulation system Technical Scope 1.5-300 HP, 1800 RPM 230/460, 460, 575V / 60 Hz TEFC, TEBC, TENV (IP55) Frame sizes: 143TC-449T NEMA, IEEE 841, IEEE 112B

We have over 100 years of experience of direct current motor engineering and manufacturing experience utilizing superior design and quality control systems. These machines are a proven reliable lifeline to driven equipment and the backbone of thousands of operations around the world. Constructed in a rugged magnetic ring frame or cast-iron fabricated frame for severe industrial duty applications. Anti friction bearings with removable bearing cartridges and caps. Fully compliant class F insulation contains several components rated class H, unless otherwise specified. Strong Tungsten Inert Gas (TIG) welded commutator risers to the armature coil. Tape Reinforced Encapsulated Construction (TREC) of main field coils and commutating field coils is a process which strengthens, seals, and bonds the coil and pole into a single unit highly resistant to contaminants. Technical Scope 1-500 HP, 300-3600 RPM Armature voltage: 180, 240, 500 Field voltage: 300/150, 240/120 DPFG, DPFG-BV, TE, and Explosion proof

The Energy Saver NEMA Premium Efficient design meets CSA-Motors and C-390, UL-Component & Insulation System Recognition and CE mark for the 320 frame and smaller. Five-year warranty is standard. This comprehensive warranty program covers both mechanical and NEMA Premium efficiency performance (36 months operational/40 months maximum from shipment). Meets NEMA MG1 table 12-12 premium efficiency levels. Tested per IEEE Standard 112, Test Method B. The insulation system meets NEMA MG1-31 standards for motors operating on Inverter power at 460 or 575 volts. Includes a 10:1 variable torque along with a 4:1 constant torque speed range. The frame, end shields, fan cover and conduit box are a rugged cast iron construction. A recessed steel-reinforced neoprene slinger minimizes contaminants from entering the bearing cavity. Additional HP is available at 1.15 service factor for severe applications. A non-hygroscopic, anti-fungus Class F insulation, with an 80C (NEMA B) temperature rise. 0.08 in/sec vibration meets the IEEE 841 Standard.

Colour Multicolour Item Dimensions LxWxH 50 x 40 x 35 Centimeters Power Source Fuel Powered Material Metal 6.5 HP , 4 Stroke * Fuel efficient and easy to maintain. * Compact, lightweight, easy to carry. * High power-to-displacement ratio * Easy starting with an automatic decompression system and an easy-to-grip soft recoil starter handle * High quality materials and purpose-built components which ensure reliable, long-term use * Reduced vibration and noise levels * Low fuel and oil consumption

Type Of Protection: Safe Area Power Range: 0.06Kw To 2000Kw Frame Size: 56 - 710 Number Of Poles: 2,4, 6, 8 And More Ingress Protection: Ip 23, Ip 55 And Higher Thermical Class: 155 (F), 180 (H) Method Of Cooling: Tefc, Odp

The 1PT0 special textile application motors are offered from 30kW -55kW in 4Pole. These highly energy efficient motors are made exclusively for textile ring frames with IC417 cooling. These motors are suitable for 415 V + 10%, 50Hz + 5% and an Ambient of 50C. Type : Textile Motors Output : 30 KW to 55 KW Poles : 4 Pole

Overview High torque NEMA design A motor that exceeds NEMA design C torques. Sizes 3.7 - 373 kW, 5 - 500 Hp totally enclosed, three phase

Type Of Protection: Safe Area Power Range: 500 Kw To 4800Kw Frame Size: 400&Nbsp;- 710 Number Of Poles: 2,4, 6, 8 And More Ingress Protection: Ip 23, Ip 55 And Higher Thermical Class: 155 (F), 180 (H) Method Of Cooling: Tefc, Caca, Cacw

Type Of Protection: Safe Area Power Range: 0.09 To 15Kw Frame Size: Up To 355 Number Of Poles: 4 Ingress Protection: Ip55 Temperature Class: F Method Of Cooling: Tefc

GPN SERIES 300 MM - 450 MM Improved aesthetics Extruded al. Carcase Pressure diecast brackets Double sealed prelubricated bearings Major Applications Desert Cooling or Evaporative Cooling Transformer Cooling, Condenser Cooling Chiller Ventilation Axial Flow Fans Range : Air flow from 1000 m3/hr to 350000 m3/hr with Static pressure from Free flow to 135 mm wg subject to a maximum Motor rating of 75KW. Sweep : 12"" to 75"" Speed : 725 to 2950 rpm Impeller : Die Cast Aluminum alloy having Aerofoil blades with adjustable angle Man Cooler Size : 19"" to 48"" ( 5 Sizes) Type : Tubular, Pedestal, Bracket Type Air Qty. : 22000 M3/hr to 74500 M3/hr at 10 times Blade Sweep Speed : 960 to 2900 Rpm "

The 1LA0 Dual Speed motors are offered in 4/2 Pole & 8/4 Pole in various kW combinations. These squirrel cage Induction motors confirming to IS: 325 are offered in Cast Iron housing with IP 55 protection and with IC411 cooling. These motors are suitable for 415 V + 6%, 50Hz + 3% and an Ambient of 40C. Type : Dual Speed Motors Output : 5.5/10 KW to 100/120 KW Poles : 4/2 Pole & 8/4 Pole

Specifications Frames: 100 to 180L Rating: 0.55 to 15.0 kW Poles: 4, 6 & 8 Mountings: B3, B5, B14, Pad & combinations Protection: IP55 Enclosure: TENV, TEFC with clean flow Applications: Ring, Loom, Carding, Ginning & Spinning

Rated Power 100kW Max Power 1250Nm Max Power 150~200KW Max Torque 500~2800Nm Max Speed 3000~10000rpm Cooling Method Water cooling IP Class IP 67

Type Of Protection: Safe Area Frame Size: 56 - 586 Number Of Poles: 2, 4, 6, 8 Ingress Protection: Ip 55 Temperature Class: 155 (F), 180 (H) Method Of Cooling: Tefc

Series:EC Voltages:380 - 480V 50 or 60HzFrame size:Special Frame construction:Steel Power output:3,7kW max Degree of protection:IP55 - IP66 Mounting arrangements:Specific mounting arrangement Efficiency class:IE4 Speed range:200 - 1800 rpm Certificates:UL, cUL, CE

We are one of the most promising Suppliers of AC Motors in India for customized applications related to industrial power and electrical control equipment. We provide wide variety of Industrial AC & DC Motors at competitive prices. We offer squirrel cage, slip ring motors in TEFC / SPDP enclosures. We can also offer motors confirming to NEMA/ANSI standards on request apart from IEC/IS standards. They are duly type tested by accredited laboratories and routine tested by us. Our products are extremely energy efficient and durable. These products are made up of quality raw materials due to which they last longer We provide equipment tailored as per customer's requirements.

MARATHON Electric presents CHALLENGER Series TEFC Squirrel cage motors with excellent product features and outstanding performance parameters. Range 0.25 kW to 400 kW Frame IEC 80 to 355 in cast iron Mounting Foot/Flange/Face Pole 2 to 8 Others on request Frequency 50 or 60 Hz Ambient -40 to 65 C Others on request Protection IP 55 Others on request Feature Complying to all international standards Totally enclosed fan cooled sq. cage Alpower Aluminium Body squirrel cage motors upto IEC frame 180L Challenger series squirrel cage motors Integral feet rugged cast iron construction Energy efficient eff2/eff1 Rationalized product features Eff 1 in line with is:12615 / CMEP 600% max. stg. current Rtd / btd ( frame 280 onward ) Low noise level 60hz. supply ce / csa marking Class hinsulation 55 deg. ambient APPROVED BY MAJOR CONSULTANTS LIKE NTPC / BHEL / EIL

Specifications Frames: 90 to 355L Rating: 0.37 to 315.0 kW Poles: 2, 4, 6 & 8 Mountings: B3, B5, B14 & combinations Protection: IP55 Enclosure: Totally enclosed force cooled with 3ph fan motor

Specifications Frames: 112M to 160L Rating: 0.75 to 7.5 kW Poles: 4, 6 & 8 Mountings: B5 Protection: IP55 Enclosure: TENV, TEFC

Overview Super E NEMA Premium efficient HVAC motors in ODP and TEFC designs with ball bearings and plugged grease packages Sizes 0.75 - 74.57 kW, 1 - 100 Hp totally enclosed, open drop proof, three phase

The MVE-MICRO external electric vibrators are characterized by their small size and consist of an electric motor housed in a robust cast iron body designed by FMEA, with eccentric weights mounted on both ends of the shaft.

Specifications Frames: 63 to 160L Rating: 0.037 to 5.5 kW Poles: 4, 6 & 8 Mountings: B3, B5, B14 or special Protection: IP55 Enclosure: Totally enclosed or force cooled Torque: 0.048 to 3.57 kg.m

Standards: IEC 60079 0, 1, 7, 31 IEC 60034 1, 2, 5, 6, 7, 8, 9, 12, 14, 30 IEC 60072 Ex d, Ex de / Ex-tb, Ex-tc ATEX category 2D, 2G, 2GD Group IIB, IIC Temperature Class T3, T4, T5, T6 Zones 1, 2 / 21, 22 Max surface temperature [C] T150, T135, T125, T100, T85 Protection IP55, IP56, IP65, IP66 Frame size from 90 to 160 (IEC) Power from 1.1 to 22kW Three phase 1 or 2 speed 400V, 50 Hz Poles: 2, 4, 6, 8 With forced ventilation Available IE1, IE2 Available Atex, IECEx

Siemens CHAMPION Series Cage Motors are suitable for the most diverse applications. The Motors are available in the wide range from frame sizes 63 to 355L. These Motors conform to eff1 and eff2 requirements for efficiency. These motors have a high efficiency and high uptime. Consequently the productivity is higher and energy consumption lower. The motors have low life cycle costs, hence great saving!!!.. The active parts of the TEFC CHAMPION Cage Motors have been optimized to meet the requirements of efficiency values of and, as per IS: 12615-2004. All these motors have CE marking (on the rating plate) in conformance to Machinery Directive 98/37/EC, EC Low Voltage Directive 2006/95/EC and EMC Directive 89/336/EEC. Type : Three-phase squirrel-cage induction motors Output : 0.12 kw 315 kW Frame Size : 63 355L

Specifications Frames: 71 to 355L Rating: 0.12 to 150.0 kW Poles: 4/2, 8/4, 6/4, 8/6 & others Mountings: B3, B5, B14 & combinations Protection: IP55 Enclosure: TEFC

Standards: IEC 60079 0, 1, 7, 31 IEC 60034 1, 2, 5, 6, 7, 8, 9, 12, 14, 30 IEC 60072 Ex d, Ex de / Ex-tb, Ex-tc ATEX category 2D, 2G, 2GD Group IIB, IIC Temperature Class T3, T4, T5, T6 Zones 1, 2 / 21, 22 Max surface temperature [C] T150, T135, T125, T100, T85 Protection IP55, IP56, IP65, IP66 Frame size from 63 to 160 (IEC) Power from 0.12 to 22kW Three phase 1 or 2 speed 400V, 50 Hz Poles: 2, 4, 6, 8 Not ventilated Available IE1, IE2 Available Atex, IECEx

Standards: IEC 60079 0, 1, 7, 31 IEC 60034 1, 2, 5, 6, 7, 8, 9, 12, 14, 30 IEC 60072 Ex d, Ex de / Ex-tb, Ex-tc ATEX category 2D, 2G, 2GD Group IIB, IIC Temperature Class T3, T4, T5, T6 Zones 1, 2 / 21, 22 Max surface temperature [C] T150, T135, T125, T100, T85 Protection IP55, IP56, IP65, IP66 Frame size from 71 to 160 (IEC) Power from 0.37 to 22kW Three phase 1 or 2 speed 400V, 50 Hz Poles: 2, 4, 6, 8 Self ventilated Available IE1, IE2 Available Atex, IECEx

The Converter Duty motors for Constant Torque applications are offered from 11kW to 315kW in 2, 4, 6 & 8Pole with TEFC Enclosure IC416 separately cooled. The Reference Standard for these motors is IS: 325 / IEC: 60034-1. The 1PQ0 Series motors are offered for an Ambient of 50C, for Altitude < 1000m, with Class F insulation. These motors are provided with dual coat copper wires which has superior electrical, mechanical and thermal properties. Type : Three-phase squirrel-cage induction motors Output : 11 kw 315 kW Frame Size : 160M 355L

The MVE-SS electric vibrating motors are equipped with an AISI 316 body, with a ""fluid"" design and are specifically designed for applications in the food & chemicals sector. They consist of an electric motor housed in a robust Stainless Steel body designed by FMEA, with eccentric weights mounted on both ends of the shaft; available in 2, 4, 6 and 8 poles with different voltages, they are suitable for use with inverters (variable frequency drives) and have a centrifugal force ranging from 200 to 500 kg, adjustable on each individual model.

Brand Wolong Morley Ex protection level Frame size Voltages Power output Frame construction Mounting arrangments Degree of protection Number of poles Temperature class Certificates Cooling method

A Green Solution by CG CG has developed IE2 range of motors. We are the first in India to have an entire range of IE2 motors in safe area and flameproof construction. Subsequently, IS 12615:2004 also got revised and now its 2011 edition is inline with IEC60034-30 The Indian standard mentions following additional performance other than IEC60034-30 Performance requirements in addition to efficiency. Breakaway torque Breakaway current Full load speed Full load current Frame size designation Output 0.37Kw to 250 kW Frame IEC71 to IEC355LX Pole 2,6,4 Voltage 415 +/- 10% Frequency 50 Hz +/- 10% Construction Flameproof / Safe area Efficiency Class (IE2) As per new requirements of IEC60034-30 and IS12615:2011. Testing Method: CG Determines efficiency values according to clause 8.2.2.5.1 of IEC 60034-2-1 using the indirect method (low uncertainty), with additional load losses(PLL) determined by measurement

Standards: IEC 60079 0, 1, 7, 31 IEC 60034 1, 2, 5, 6, 7, 8, 9, 12, 14, 30 IEC 60072 Ex d, Ex de / Ex-tb, Ex-tc ATEX category 2D, 2G, 2GD Group IIB, IIC Temperature Class T3, T4, T5, T6 Zones 1, 2 / 21, 22 Max surface temperature [C] T150, T135, T125, T100, T85 Protection IP55, IP56, IP65, IP66 Frame size from 180 to 315 (IEC) Power from 18.5 to 200kW Three phase 1 or 2 speed 400V, 50 Hz Poles: 2, 4, 6, 8 Not ventilated Available IE1, IE2 Available Atex, IECEx

Type Of Protection: Safe Power Range: 0.01Kw To 5.5Kw Frame Size: 45 - 112 Number Of Poles: 4 Ingress Protection: Ip 55 Temperature Class: F Method Of Cooling: N/A

Series No: Vacuum cleaner motor Power（W): 700-130 Outer diameter(mm): 70, 95 Voltage（V): 120 Frequency（Hz): 60 Pole（P): 2

Power: 4~1600kW Frequency: 50Hz/60Hz Speed:500~1500rpm Voltage: 380V~3300V Protection grade: IP55 Cooling method: IC411 YBS, YBSS, and YBSD series conveyors explosion proof three-phase asynchronous motors are special motors for driving bendable scraper conveyors, belt conveyors or other equipment in coal mines. The explosion-proof performance of the motor is in accordance with GB3836.1-2010 "Explosive Atmosphere Part 1: General Requirements for Equipment" and GB3836.2-2010 "Explosive Atmosphere Part 2: Equipment Protected by Flameproof Enclosure "d"". Its explosion-proof mark is "Ex d I Mb" ("ExdI"-before 2010). It is suitable for the place where the explosive gas mixture of methane or coal dust exists.

Overview UL & CSA approved for Class I, Group D; Class I, Group D, Class II, Group F & G; Class I, Group C & D, Class II Group F & G. Sizes 2.2 - 111 kW, 3 - 150 Hp totally enclosed, three phase

Overview Jet pump motor for residential and industrial applications Sizes 0.18 - 5.6 kW, 0.25 - 7.5 Hp totally enclosed, three phase 0.18 - 5.6 kW, 0.25 - 7.5 Hp open drip proof, three phase 0.09 - 3.7 kW, 0.13 - 5 Hp totally enclosed, single phase 0.09 - 5.6 kW, 0.13 - 7.5 Hp open drip proof, single phase

MP series

Rated Power 22kW Max Power 70Nm Max Power 45~60KW Max Torque 150~200Nm Max Speed 8000~12000rpm Cooling Method Water cooling, Air Cooling IP Class IP 67

Duke Pumping Solutions offers advanced 6″ PMSM Submersible Motors Water Filled [Smart], designed for high efficiency, superior performance, and minimal maintenance. These motors are perfect for deep well pumps, agricultural irrigation, and industrial water pumping systems. Equipped with Permanent Magnet Synchronous Motor (PMSM) technology, they offer precise control, reduced energy consumption, and enhanced reliability. Ideal for both residential and commercial applications, these smart water-filled motors are engineered for long-lasting performance in tough conditions. Energy-Efficient PMSM Technology: Reduces energy consumption and operational costs. Durable and Corrosion-Resistant: Designed to perform in harsh environments with resistance to corrosion. Smart Monitoring: Integrated smart features for real-time performance monitoring. Minimal Maintenance: Requires less upkeep with longer service intervals. Versatile Applications: Ideal for agricultural, municipal, and industrial water pumping systems.

MARATHON Electric introduces VD series motors tailor made for inverter drives having enhanced dielectric strength and adequate thermal margin suitable for variable speed application. PWM technology involving high switching frequency IGBT drive has enabled AC induction motors to be operated as variable speed drives. However, there had been a documented increase of premature winding failure for standard general purpose motors when operated with inverter drives. High and steep front voltage spikes (dV/dT) produced by latest generation IGBT drives associated with the phenomenon of voltage wave reflection due to longer cable length imposes stress on the motor winding resulting rapid ageing and deterioration of insulation system.

Overview Stainless steel motors designed for harsh food processing environments. Sizes 0.25 - 15 kW, .33 - 20 Hp

OXFORD Motors is proud to introduce the IP55 Metric Motor line of rugged, all-purpose motors. The cast iron,totally enclosed fan cooled IP55 construction makes this motor the preferred choice for almost any application in even the toughest environments.

Overview Premium severe duty motor designed for harsh environments and a low total cost of ownership lifetime operational costs. Sizes 0.75 - 186 kW, 1 - 250 Hp totally enclosed, three phase

Series:W, WP Voltages:200-690V line and inverter operation Frame size:80 - 355 Frame construction:Cast iron Power output:0,75 - 315kW Degree of protection:IP55, IP56, IP65, IP66 Mounting arrangments:B3, V5, V6, B5, V1, V3, B35 Temperature class: 155 (F) according to 130 (B) or 180 (H) according to 155 (F) Efficiency class:IE3 Cooling method:IC411, IC410, IC416, IC418 Number of poles: 2,4, 6, 8 Certificates: ATEX, IEC-EX

Developed from the outset for maximum convenience and easy handling, ABB General performance motors can be used in a wide range of industrial applications. These motors are suitable for OEMs to build into pumps and fans, as well as for gearboxes, conveyors, general machinery and other applications. Some standard designs are available from stock, while customer and application specific solutions are manufactured to order and can be tailored to meet specific needs.

Frame:80~355mm Power: 0.75~375kW Frequency: 50Hz/60Hz Voltage: 380V Poles: 2~8P Protection grade: IP55 Cooling method: IC411 YE3/YE4/YE5 series high-efficiency three-phase asynchronous motors are fully enclosed, self-fan-cooled, squirrel-cage, high-efficiency three-phase asynchronous motors developed by our company. The power level and installation dimensions of this series of motors comply with the requirements of the International Electrotechnical Commission (IEC) standards, which are conducive to the installation of export machinery and equipment and the replacement of imported equipment. It has the characteristics of excellent performance, safe and reliable use, lower vibration and noise than similar products, and meets environmental protection requirements. The energy efficiency grades of the motors are: YE3-IE3, YE4-IE4, and YE5-IE5. It is suitable for non-explosive environments in petroleum, chemical, mining, metallurgy, power and other industries. It is an ideal power equipment.

Visam identify the most optimal solution starting from the technical and applicational necessity of the customer. Power supply: Three-phase from 42 up to 700 V at 50 and 60 Hz; Single-phase from 110 up to 240 V at 50 and 60 Hz.

Standards: IEC 60079 0, 1, 7, 31 IEC 60034 1, 2, 5, 6, 7, 8, 9, 12, 14, 30 IEC 60072 Ex d, Ex de / Ex-tb, Ex-tc ATEX category 2D, 2G, 2GD Group IIB, IIC Temperature Class T3, T4, T5, T6 Zones 1, 2 / 21, 22 Max surface temperature [C] T150, T135, T125, T100, T85 Protection IP55, IP56, IP65, IP66 Frame size from 80 to 315 (IEC) Power from 0.75 to 200kW Three phase 1 or 2 speed 400V, 50 Hz Poles: 2, 4, 6, 8 Ventilated & with forced ventilation Available IE3 Available Atex, IECEx

Series No: Kitchen Soyabean Milk Machine MotorVoltage（V): 220 Power（W): 100 Frequency（Hz): 50 Outer diameter(mm): 42 Pole（P): 2

Water Turbines - Mechanical Solutions Conveyor Systems - Mechanical Solutions Slurry Pumps - System Solutions Heat Exchangers - Components

Series No. Lawn mower (EC+ universal motor) Voltage(V) DC36 Power(W) 200~600 Frequency(Hz) / Outer diameter(mm) 131 Pole(P) 8

Overview Motors designed for general unit handling applications Sizes 0.37 - 5.6 kW, 0.5 - 7.5 Hp totally enclosed, single and three phase Features Motors feature an oversized low profile top mounted conduit box on 56 and 140T frames that provides easy access for making connections. Footed frames include slotted feet for easy mounting on OEM conveyors. UL/CSA recognized and CE certified Suggested applications Conveyors, baggage handling, unit handling, packaging, door operators, elevators, hoists

Standards: IEC 60079 0, 7 IEC 60034 1, 2, 5, 6, 7, 8, 9, 12, 14, 30 IEC 60072 Ex d, Ex de / Ex-tb, Ex-tc ATEX category 3G, 2D, 3D Temperature Class T3 Zones 2 / 21, 22 Max surface temperature [C] T150, T135, T125, T100, T85 Protection IP55, IP56, IP65, IP66 Frame size from 80 to 355 (IEC) Power from 0.75 to 375kW Three phase 1 or 2 speed 400V, 50 Hz Poles: 2, 4, 6, 8 Available IE3, IE4 Available Atex, IECEx

Type RW – A symbol of versatility The type RW motors have been designed basically for heavy duty use with driven machine imposing overloads and severe mechanical shocks and vibrations. These motors are equally suitable for smooth constant loads since the motors are also designed with high efficiency and power factor. Because of optimum utilisation of materials, with improved ventilation techniques the motors are 10 – 15% lighter in weight and yet more rugged because of their inherent special construction. Because of high Pull Out Torque and inherent thermal margin kept for high slip operation these motors are ideally suited for rerolling mills and cane cutter/cane crusher/care leveller/cane fiborizer applications pertaining to sugar industries. Because of high efficiency and power factor these mtors are also suitable for pump/fan applications.

Overview Designed for environments where washdown cleaning occurs with caustic solutions and high-pressure sprays. Sizes 0.37 - 11 kW, 0.5 - 15 Hp totally enclosed, three phase

Overview Designed for environments where washdown cleaning occurs. Sizes 0.25 - 15 kW, 0.33 - 20 Hp, single & three phase

Series:HB Voltages:200-1.100V line and inverter operationFrame size:315 - 560 Frame construction:Cast Iron Power output:375- 1.320kW Degree of protection:IP55, IP56, IP65, IP66 Mounting arrangements:B3, B5, V5, V6,V1, B35 Temperature class:155 (F) according to 130 (B) or 180 (H) according to 155 (F) Efficiency class:IE3 Cooling method:IC411, IC410, IC416, IC418 Number of poles:2, 4, 6, 8, 10 Certificates:CE

Type Of Protection: Safe Area - 200C, 400C, 600C Power Range: Up To 1000 Kw Frame Size: 80-500 Number Of Poles: 4 Ingress Protection: Up To 56 Temperature Class: 155 (F), 180 (H) Method Of Cooling: Tefc

Duke Pumping Solutions presents high-performance, oil-filled 4" submersible motors designed for efficient and reliable operation in water and wastewater pumping applications. Engineered for durability and longevity, these motors are ideal for deep well pumps, borehole systems, and agricultural irrigation. The oil-filled design provides superior cooling, reducing the risk of overheating, and ensures enhanced motor life with minimal maintenance. With an emphasis on energy efficiency and cost-effectiveness, these motors deliver optimal performance while minimizing operating expenses. Features: Energy-Efficient: Helps reduce power consumption and operational costs. Durable & Corrosion-Resistant: Built to withstand harsh water conditions, including saline and mineral-rich water. Low Maintenance: Designed for long life and reliability, requiring minimal upkeep. Oil-Filled Design: Offers superior cooling, enhancing the motor’s lifespan. Versatile Applications: Suitable for agriculture, industrial, and municipal water pumping systems.

Introducing our Air Curtain Motor, the pinnacle of indoor climate control. Harnessing controlled airflow, it creates a barrier against dust, insects, and odors, ensuring a clean interior. Versatile and adaptable, it suits retail, hospitality, and industrial settings, offering unobstructed access while safeguarding your space. Built for efficiency, it minimizes energy consumption and operates quietly, maintaining comfort without noise. With easy installation and maintenance, it saves time and effort, optimizing convenience. Elevate your environment with our Air Curtain Motor—experience innovation, reliability, and comfort in one seamless solution.

One of Indias most modern motor factories, incorporating extensive CAD facilities with over 50 years experience in the design and application of induction motors, enables MARATHON Electric to offer the benefits of proven solutions : MARATHON Electric has over 2000 MW installed world-wide. Upto 2500 KW range capability. All speeds available. Highest available efficiency rapid pay-back. High Power Factor Low Power Cost. 20 years expected design life at 1000 starts per year Resivac VPI Insulation System for total winding reliability. Highest quality lowest maintenance costs. Low Noise Level Better performance than IS: 12065. Low vibration level conforms to IS: 12075. IP 55 enclosure protection as standard on enclosed machines. Factory fixed Air Gap. Compliance with National and International Standards. Built to type N requirements. Upto 6.6 kV, 50 or 60 Hz. supply. Low Starting Current design available. Variable speed drive compatibility. Horizontal mounting. Rolling or Plain Bearings. Environmentally friendly motors to meet all drives. Type version available on request. "

Series:BN Voltages:200-690V line and inverter operation Frame size:250 - 400 Frame construction:Cast iron Power output:37 - 1.300 kW Degree of protection:IP23 Mounting arrangements:B3, V5, V6, B5, V1, V3, B35 Temperature class:155 (F) according to 130 (B) or 180 (H) according to 155 (F) Efficiency class:IE2, IE3 Cooling method:IC01, IC06 Number of poles:2, 4, 6, 8, 10 Certificates:CE, ABS, BV, DNVGL, KR, LRS, RINA, RS

Overview DC servo motors have a high inertia skewed rotor for load inertia matching and smooth rotation (no cogging). Sizes 0.2 - 6.3 Nm continuous torque Features Totally enclosed, CE/cURus Multiple feedback types to fit a range of applications Suggested applications X-ray tables, coil winders, labeling equipment, machine tool, robotics, pick and place, packaging

CAST IRON MOTORS Range 0.37 kW to 375 kW Frame IEC 80 to 355 in cast iron Mounting Foot/Flange/Face Pole 2 to 10 Others on request Frequency 50 or 60 Hz Ambient -40 to 65 C Others on request Protection IP 55 Others on request Feature Complying to all international standards ALUMINIUM MOTORS Range 0.18 kW to 15 kW Frame IEC 63 to 160 in Aluminum Mounting Foot/Flange/Face Pole 2 to 8 Other on request Frequency 50 or 60 Hz Ambient -40 to 50 C other on request Protection IP 55 other on request Feature CSA,CE approved

Series No. Kitchen Soyabean Milk Machine Motor) Voltage(V) 220 Power(W) 100 Frequency(Hz) 50 Outer diameter(mm) 42 Pole(P) 2

Series:BD Voltages:200-1.100V line and inverter operationFrame size:315 - 560 Frame construction:Cast Iron Power output:375- 1.320kW Degree of protection:IP55, IP56, IP65, IP66 Mounting arrangements:B3, B5, V5, V6,V1, B35 Temperature class:155 (F) according to 130 (B) or 180 (H) according to 155 (F) Efficiency class:IE3 Cooling method:IC411, IC410, IC416, IC418 Number of poles:2, 4, 6, 8, 10 Certificates:CE

Series:M Voltages:400V 50Hz Frame size:56 - 225 Frame construction:Aluminium, Cast iron Power output:0,25 - 100kW Degree of protection:IP55, IP56, IP65, IP66 Mounting arrangments:B3, B5, B14, V6, V5, B35, V1 Temperature class: 155 (F) according to 130 (B) Efficiency class:IE4 Cooling method:IC411, IC410, IC416, IC418 Speed range:0 - 3000 rpm Certificates: CE

Power 1.8KW-3.0KW Speed 200-1800r/min Supply voltage (VAC) 3~380-480VAC10% Frequency 50/60Hz Efficiency =IE4 Motor rotation Support for both the CW and CCW motorrotation options Mode of speed regulation RS485,PWM,0-10V,5 speeds Product characteristics Torque or speed constant protection degree IP44-IP66 Product certification UL,CE

Type Of Protection: Safe Area Power Range: 200 - 9.000 Kw Frame Size: 355 - 1120 Number Of Poles: 2 - 12 Ingress Protection: Ip55 Temperature Class: B Method Of Cooling: Ic01, Ic511, Ic611, Ic81W Options: Im B3, Im V1

Series KA5 H-OPTIM Voltages 2,3 - 11kV line and inverter operation Frame size 315 - 560 Frame construction Cast Iron Power output 180 - 2.250kW Degree of protection IP55 Mounting arrangements B3, V1, B35 Temperature class 155 (F) according to 130 (B) Number of poles 2 - 12 Cooling method IC411, IC410, IC416 Bearings Roling elements and sleeve bearings Certificates CE, Zone 2/22 (IEC), Cl. I Div.2 (NEC)

Series:WE3 Voltages:200-690V line and inverter operation Frame size:56 - 355 Frame construction:Aluminium and Cast iron Power output:0,06 - 90kW Degree of protection:IP55, IP56, IP65, IP66 Mounting arrangments:B3, V5, V6, B5, V1, V3, B35 Temperature class: 155 (F) according to 130 (B) or 180 (H) according to 155 (F) Efficiency class:IE3 Cooling method:IC411, IC410, IC416, IC418 Number of poles: 2,4, 6, 8, 10 Certificates: CE

Specifications Frames: 71 to 315L Rating: 0.12 to 120.0 kW Poles: 4/2, 8/4, 6/4, 8/6 & others Mountings: B3, B5, B14 & combinations Protection: IP55 Enclosure: TEFC

Overview High torque NEMA design A motor that exceeds NEMA design C torques. Sizes 3.7 - 373 kW, 5 - 500 Hp totally enclosed, three phase

Power 1.1KW-1.5KW Speed 200-1800r/min Supply voltage 3~380-480VAC10% Frequency 50/60Hz Efficiency =IE4 Motor rotation Support for both the CW and CCW motor rotation options Mode of speed regulation RS485, PWM, 0-10V, 5 speeds Product characteristics Torque or speed constant protection degree IP44-IP66 Product certification UL, CE

Electric vibrating motors (MVE) for general applications in various industrial sectors on machines and vibrating tables. Available in 2, 4, 6 and 8 poles, as well as in direct current with different voltages, they are suitable for use with inverters (variable frequency drive) and have a centrifugal force ranging from 20 to 30,000 kg, adjustable on each individual model.

Overview Our extensive line of General Purpose three phase open motors are available in cast iron and industrial steel. Designed for ""general purpose"" use means that these motors can be used in many applications. The Super E Motors (EM & CEM) provide NEMA Premium efficiency and are designed as standard to be inverter ready with wide variable torque speed ranges. Features Suitable for mounting in any position Ball bearings Heavy-gauge steel or cast-iron frames, and gasketed conduit boxes EM Super-E motors have NEMA Premium efficiency, Class F insulation, 1.15 service factor and 3 year warranty Motors with TR suffix have roller bearings for heavy belted loads Common Industries Aggregate & Cement Air Handling Chemical, Oil, & Gas Food, Beverage, & Pharmaceutical Paper & Forest Unit & Baggage Handling Common Applications Compressors Pumps Fans Conveyors Material Handling Machine Tool

Series:KN Voltages:200-690V line and inverter operation Frame size:250 - 400 Frame construction:Cast iron Power output:37 - 1.300 kW Degree of protection:IP23 Mounting arrangments:B3, V5, V6, B5, V1, V3, B35 Temperature class: 155 (F) according to 130 (B) or 180 (H) according to 155 (F) Efficiency class:IE3, IE4 Cooling method:IC01, IC06 Number of poles: 2,4, 6, 8, 10 Certificates: CE

Power 1.1KW-1.5KW Speed 200-1800r/min Supply voltage 3~380-480VAC10% Frequency 50/60Hz Efficiency =IE4 Motor rotation Support for both the CW and CCW motorrotation options Mode of speed regulation RS485, PWM, 0-10V, 5 steps Product characteristics Torque or speed constant Protection IP44-IP66 Product certification UL, CE

Series:EC Vector Voltages:115, 208 or 230V 1 phase 50 or 60Hz Frame size:Special Frame construction:Steel Power output:1/4 - 1 Hp Degree of protection:IP20, IP55 Mounting arrangments:Specific mounting arrangement Efficiency class:IE4 Speed range:200 - 1800 rpm Certificates: UL, cUL, CE