Motors

The 1/4 HP 1400 RPM Single Phase Electric Motor is a professional-grade motor engineered for reliable performance in a variety of light-duty industrial and commercial applications. With a 1/4 horsepower output and a rotational speed of 1400 RPM, this motor is ideal for powering equipment such as fans, pumps, and small conveyors. Designed with a single-phase configuration, it is compatible with standard power supplies, making it easy to install and use in settings where three-phase power is unavailable. This motor is recognized for its energy efficiency and durability, ensuring long-lasting operation with minimal maintenance requirements. Operating quietly with low vibration, the motor provides consistent and smooth performance, making it suitable for precision tasks. Professionals prefer this motor for its combination of reliability, cost-effectiveness, and versatility, making it an excellent choice for various applications that require steady and moderate power output.

The 1/5 HP 1400 RPM Single Phase Electric Motor is a professional-grade motor designed for light-duty industrial and commercial applications. With a 1/5 horsepower output and a rotational speed of 1400 RPM, it delivers reliable and consistent power for driving small machinery such as fans, pumps, and conveyors. The single-phase design ensures compatibility with standard power supplies, making it ideal for settings where three-phase power is unavailable. This efficient motor is engineered for durability and low-maintenance operation, ensuring long-lasting performance in continuous-use environments. Its quiet and low-vibration characteristics make it suitable for precision applications. Professionals prefer this motor for its combination of energy efficiency, reliability, and ease of installation, providing cost-effective solutions in commercial and industrial operations where consistent and moderate power is required.

The 1/3 HP 1400 RPM Single Phase Electric Motor is a professional-grade motor designed for reliable performance in various light to moderate industrial and commercial applications. With a 1/3 horsepower output and a rotational speed of 1400 RPM, this motor is ideal for driving equipment such as pumps, fans, and conveyors. Featuring a single-phase design, it is compatible with standard power supplies, making installation straightforward and efficient. This motor is known for its energy efficiency and durability, ensuring long-lasting operation with minimal maintenance requirements. Operating with low noise and vibration, the motor provides smooth and consistent performance, making it suitable for precision-driven tasks. Professionals choose this motor for its combination of reliability, cost-effectiveness, and versatility, making it an excellent option for a wide range of applications that require steady and moderate power output.

The 1/2 HP 1400 RPM Single Phase Electric Motor is a professional-grade motor designed for reliable and efficient performance in various industrial and commercial applications. With a 1/2 horsepower output and a speed of 1400 RPM, this motor is ideal for driving equipment such as pumps, fans, compressors, and conveyors. Featuring a single-phase design, it is compatible with standard power supplies, making installation straightforward and efficient. This motor is recognized for its energy efficiency and durability, ensuring long-lasting operation with minimal maintenance requirements. Operating with low noise and vibration, the motor provides smooth and consistent performance, making it suitable for precision tasks. Professionals prefer this motor for its combination of reliability, cost-effectiveness, and versatility, making it an excellent option for a wide range of applications that require steady and moderate power output.

The 1/3 HP 1400 RPM Three Phase Electric Motor is a professional-grade motor designed for high-efficiency and precision in industrial and commercial applications. With a 1/3 horsepower output and a rotational speed of 1400 RPM, this motor is ideal for driving equipment such as pumps, fans, conveyors, and compressors. Its three-phase design delivers superior power efficiency, higher torque, and smoother operation, making it ideal for continuous, heavy-duty tasks in demanding environments. Engineered for durability, the motor is constructed from high-quality materials that ensure long-lasting performance with minimal maintenance. It operates with low noise and vibration, offering stable and reliable performance for precision-driven applications. Professionals favor this motor for its ability to handle sustained workloads efficiently, reduce operational costs, and deliver consistent, high-performance power in a wide range of industrial settings.

The 1/2 HP 1400 RPM Three Phase Electric Motor is a professional-grade motor designed for demanding industrial and commercial applications. With a 1/2 horsepower output and a speed of 1400 RPM, it provides reliable and efficient power for machinery such as pumps, compressors, conveyors, and ventilation systems. The three-phase design offers superior energy efficiency, smoother operation, and higher torque compared to single-phase motors, making it ideal for continuous use in heavy-duty environments. Engineered with high-quality materials, this motor ensures durability and long-lasting performance, even under challenging conditions. Its low noise, low vibration, and maintenance-free design make it suitable for precision-driven applications. This motor is favored by professionals for its ability to deliver consistent power, reduce energy costs, and withstand harsh working conditions, offering excellent performance in high-demand industrial settings.

The 1/5 HP 1400 RPM Three Phase Electric Motor is a professional-grade motor designed for precision and efficiency in light industrial and commercial applications. With a 1/5 horsepower output and a speed of 1400 RPM, it is ideal for driving small machinery such as fans, pumps, and conveyors. The three-phase design offers superior energy efficiency, higher torque, and smoother operation compared to single-phase motors, making it well-suited for continuous use in demanding environments. Built from high-quality materials, this motor ensures long-lasting durability and reliable performance. It operates with low noise and minimal vibration, making it perfect for applications where stable, quiet, and maintenance-free operation is essential. Professionals favor this motor for its combination of efficiency, durability, and consistent power output, providing excellent performance in a range of industrial and commercial systems.

The 1/4 HP 1400 RPM Induction Motor is a professional-grade motor engineered for efficiency, reliability, and durability in industrial and commercial applications. With a 1/4 horsepower output and a rotational speed of 1400 RPM, it is ideal for driving equipment such as pumps, fans, blowers, and conveyors. The induction motor design ensures smooth, low-vibration operation and minimal maintenance, providing consistent and energy-efficient performance. Built for demanding environments, this motor features high-quality construction, ensuring long service life even under continuous use. Its low noise level and reliable performance make it suitable for professional settings where precision and dependability are critical. This motor is preferred for applications requiring moderate power, offering both cost-effectiveness and reliability, making it a popular choice among professionals in various industries.

The 1/3 HP 1400 RPM Induction Motor is a professional-grade motor designed for precision and efficiency in industrial and commercial applications. With a 1/3 horsepower output and a speed of 1400 RPM, it is ideal for operating equipment such as pumps, compressors, fans, and conveyors. Its induction motor design ensures smooth, reliable, and energy-efficient performance through electromagnetic induction, requiring minimal maintenance. Engineered for durability, this motor is built with high-quality materials to withstand demanding environments, offering long-lasting service. The motor's low vibration and quiet operation make it suitable for professional settings where stable and continuous performance is critical. Its energy efficiency helps reduce operational costs, making it a preferred choice for professionals looking for a balance of power, reliability, and cost-effectiveness in their equipment.

The 1/2 HP 1400 RPM Induction Motor is a professional-grade motor engineered for high-efficiency and durability in demanding applications. With a 1/2 horsepower output and a steady speed of 1400 RPM, it offers optimal performance for a variety of industrial and commercial uses, including pumps, blowers, conveyors, and ventilation systems. The motor operates on the principle of electromagnetic induction, ensuring smooth, reliable, and maintenance-free operation over extended periods. Its design includes a rugged, high-quality build for resistance to wear and tear, ensuring longevity in harsh environments. This motor is also highly energy-efficient, offering reduced operational costs, making it a preferred choice for professionals who seek reliability, low maintenance, and continuous performance in high-demand settings. Additionally, the low-vibration and noise characteristics contribute to a quieter working environment, further enhancing its suitability for precision-driven applications.

Type Of Protection: Safe Area Power Range: 500 Kw To 4800Kw Frame Size: 400&Nbsp;- 710 Number Of Poles: 2,4, 6, 8 And More Ingress Protection: Ip 23, Ip 55 And Higher Thermical Class: 155 (F), 180 (H) Method Of Cooling: Tefc, Caca, Cacw

Type Of Protection: Safe Area Power Range: 50 - 1.000 Kw Frame Size: 180 - 400 Number Of Poles: Bis 15.000 U/Min Ingress Protection: Ip 23 + Ip 55 Temperature Class: 150 (F), 180 (H) Method Of Cooling: Odp, Cacw

Introducing our state-of-the-art Air Curtain Motor, the ultimate solution for maintaining indoor comfort while keeping unwanted elements at bay. Engineered with precision and innovation, this motor represents the pinnacle of modern air technology, promising unmatched At its core, our Air Curtain Motor harnesses the power of controlled air flow to create a seamless barrier between indoor and outdoor environments. By generating a powerful curtain of air across entrances and openings, it effectively prevents dust, insects, and pollutants from infiltrating your space, ensuring a clean and comfortable interior environment. What sets our Motor apart is its versatility and adaptability. Whether it's a retail store, restaurant, warehouse, or office building, this motor seamlessly integrates into any setting, the elements while maintaining unobstructed access for people and vehicles. With customizable settings and intuitive controls, you have the flexibility to adjust the airflow to suit your specific needs, ensuring optimal performance in any situation.

Introducing our Air Curtain Motor, the pinnacle of indoor climate control. Harnessing controlled airflow, it creates a barrier against dust, insects, and odors, ensuring a clean interior. Versatile and adaptable, it suits retail, hospitality, and industrial settings, offering unobstructed access while safeguarding your space. Built for efficiency, it minimizes energy consumption and operates quietly, maintaining comfort without noise. With easy installation and maintenance, it saves time and effort, optimizing convenience. Elevate your environment with our Air Curtain Motor—experience innovation, reliability, and comfort in one seamless solution.

Duke Pumping Solutions introduces 6" Submersible Motors Water Filled, engineered for superior performance in submerged applications. These motors are ideal for deep well pumping, agricultural irrigation, and industrial water extraction. With a water-filled design for efficient cooling and lubrication, they ensure long-lasting, reliable operation in challenging conditions. Built for energy efficiency and minimal maintenance, our motors are the perfect solution for both domestic and international buyers seeking a cost-effective, high-performance water pumping system. Key Features: Water-Cooled Design: Ensures effective cooling and long-lasting performance. Energy-Efficient: Operates with lower power consumption, reducing overall energy costs. Compact & Durable: Designed for long service life even in harsh water conditions. Versatile Applications: Ideal for agriculture, industry, and municipal water supply systems. Low Maintenance: Requires minimal servicing, ensuring uninterrupted operation.

Duke Pumping Solutions offers 4" Submersible Motors Water Filled, a compact yet powerful solution for a wide range of water pumping applications. Designed to operate efficiently in submerged conditions, these motors are perfect for agricultural irrigation, small-scale water supply, and industrial systems. The water-filled cooling system ensures optimal performance, while their energy efficiency and minimal maintenance requirements make them a cost-effective choice for long-term use. Key Features: Water-Cooled: Self-lubricating and efficient cooling through water for extended motor life. Compact Design: Ideal for use in confined spaces like shallow wells and small boreholes. Energy Efficient: Reduced power consumption helps minimize operational costs. Durable: Built with corrosion-resistant materials to handle harsh water environments. Low Maintenance: Requires minimal servicing, ensuring consistent, hassle-free operation.

General purpose motors with aluminum housing, IP66 protection and C4 painting system are suitable for a wide range of standard drive tasks in industrial environments and humid atmospheres. The design and architecture of the motors ensure maximum flexibility and minimum installation effort. Due to their particularly low weight, they are predestined for applications in pumps, fans and compressors.

Applications Induction motor is totally enclosed and fan cooled (TEFC Motor) Induction motor have outstanding performance, such as high efficiency, energy-saving, high starting torque, low noise, little vibration, reliable operation, re-winding leaf and easy maintenance. Induction motor is used for multi-purpose such as: Industrial Domestic and agriculture. Machinery equipment.

Developed from the outset for maximum convenience and easy handling, ABB General performance motors can be used in a wide range of industrial applications. These motors are suitable for OEMs to build into pumps and fans, as well as for gearboxes, conveyors, general machinery and other applications. Some standard designs are available from stock, while customer and application specific solutions are manufactured to order and can be tailored to meet specific needs.

Overview The largest of the DC product family - a laminated construction with removable pole assemblies that promote serviceability and robustness for the most demanding applications. Sizes 372 - 2237 kW, 500 - 3,000 Hp NEMA Features A variety of thermal protections, speed feedback devices, all enclosure styles, vibration detection, VPI, air flow monitoring, water flow monitoring, etc. Suggested applications Pulp and paper processing, extruders, conveyors, test stands, stamping press, crane and hoist, rolling mills, machine tools, ski lift, etc.

Overview Motors designed with high performance neodymium magnets and low inertia rotor for faster acceleration. Sizes 0.4 - 40 Nm continuous torque Features 4x continuous torque Totally enclosed, CE/cURus A completely encapsulated winding allows heat to dissipate while protecting internal components from contamination. Multiple feedback types to fit a range of applications Suggested applications Cut-to-length, flying shear, machining, labeling, material handling, winding, 3D printing, robotics elevators, hoists

Overview Motors designed for general unit handling applications Sizes 0.37 - 5.6 kW, 0.5 - 7.5 Hp totally enclosed, single and three phase Features Motors feature an oversized low profile top mounted conduit box on 56 and 140T frames that provides easy access for making connections. Footed frames include slotted feet for easy mounting on OEM conveyors. UL/CSA recognized and CE certified Suggested applications Conveyors, baggage handling, unit handling, packaging, door operators, elevators, hoists

Overview Featuring Dodge short series brakes which are spring set, magnetically released power off type brakes integrally mounted to the motor for the most compact design Sizes 0.37 - 3.7 kW, 1/2 - 5 Hp totally enclosed, three phase Features Single phase brake, inverter ready Suggested applications Conveyors, baggage handling, unit handling, packaging, door operators, elevators, hoists

Overview Featuring a Dodge "D" series brake which are spring set, magnetically released power off type brakes flange mounted to the motor with a manual release lever Sizes 0.37 - 7.45 kW, 0.5 - 10 Hp totally enclosed, three phase Suggested applications Conveyors, baggage handling, unit handling, packaging, door operators, elevators, hoists

Sizes 1.1 - 4 kW, 1-1/2 - 5 Hp Suggested applications Specifically designed for operation on pressure washers and steam cleaners

Sizes 0.55 - 15 kW, 3/4 - 20 Hp Suggested applications U-frame mounting dimensions for three-phase and single phase applications

Overview RPM AC product line provides the ultimate in power density performance in either totally enclosed or open construction. RPM AC motors provide continuous Constant Torque performance (1000:1) from zero speed to base speed. Sizes 1.5 - 900 kW, 2 - 1200 Hp; DPFV, TEFC, TEBC, TEFC, three phase

Overview Close coupled pump motors include over-sized ball bearings with locked drive end construction to minimize endplay. Sizes 0.37 - 56 kW, 0.5 - 75 Hp totally enclosed, three phase 0.37 - 74.5 kW, 0.5 - 100 Hp open drip proof, three phase 0.33 - 11 kW, 0.33 - 15 Hp totally enclosed, single phase 0.37 - 11 kW, 0.5 - 15 Hp open drip proof, single phase

Overview Custom Immersible motors are designed for use in non-hazardous area dry pit applications where the possibility of flooding exists. Sizes 3.73 - 186 kW, 5 - 250 Hp totally enclosed, three phase

Overview Motors designed and manufactured for normal, medium and high thrust applications. Sizes 1.11 - 56 kW, 1.5 - 75 Hp totally enclosed 1.49 - 45 kW, 2 - 60 Hp open drip proof

Overview Designed for environments where washdown cleaning occurs with caustic solutions and high-pressure sprays. Sizes 0.37 - 11 kW, 0.5 - 15 Hp totally enclosed, three phase

Overview UL & CSA listed for Class I (gas), Group C & D with a T3C temperature code. Sizes 0.37 - 150 kW, 0.25 - 200 Hp totally enclosed, three phase

Overview Motors designed to meet the requirements for fire pumps. Sizes 7.45 - 398 kW, 1 - 400 Hp open drip proof, three phase

One of Indias most modern motor factories, incorporating extensive CAD facilities with over 50 years experience in the design and application of induction motors, enables MARATHON Electric to offer the benefits of proven solutions : MARATHON Electric has over 2000 MW installed world-wide. Upto 2500 KW range capability. All speeds available. Highest available efficiency rapid pay-back. High Power Factor Low Power Cost. 20 years expected design life at 1000 starts per year Resivac VPI Insulation System for total winding reliability. Highest quality lowest maintenance costs. Low Noise Level Better performance than IS: 12065. Low vibration level conforms to IS: 12075. IP 55 enclosure protection as standard on enclosed machines. Factory fixed Air Gap. Compliance with National and International Standards. Built to type N requirements. Upto 6.6 kV, 50 or 60 Hz. supply. Low Starting Current design available. Variable speed drive compatibility. Horizontal mounting. Rolling or Plain Bearings. Environmentally friendly motors to meet all drives. Type version available on request. "

Fabricated Robust Steel construction for frames. Uniform internal cooling circuit. Axial Cooling for smaller ratings, both radial and axial ventilation for larger ratings. Basic mounting dimensions as per IS. Class insulation system, both Resin rich & Resin poor (VPI) varieties available. Rotors are dynamically balanced Rotor bars are brazed with end rings by One Shot Brazing process. Environmentally friendly motors to meet all Drives Fault tested Phase Segregated Terminal box. RTD, BTD, Dial type Temperature indicator available. Separate Terminal Box available for Neutral point, RTD, BTD termination purpose. Provision for Magnetic Slot Wedge to improve Efficiency, Power Factor and improve Electromagnetic noise Provision for special Epoxy paint syste

MARATHON Electric introduces VD series motors tailor made for inverter drives having enhanced dielectric strength and adequate thermal margin suitable for variable speed application. PWM technology involving high switching frequency IGBT drive has enabled AC induction motors to be operated as variable speed drives. However, there had been a documented increase of premature winding failure for standard general purpose motors when operated with inverter drives. High and steep front voltage spikes (dV/dT) produced by latest generation IGBT drives associated with the phenomenon of voltage wave reflection due to longer cable length imposes stress on the motor winding resulting rapid ageing and deterioration of insulation system.

Specification ENCLOSURE - IS: 2148 RATING - IS :325 DIMENSION - IS:1231(FOOT) | IS: 2223(FLANGE) Range Frame : 90L 355L kW : 0.75 - 315 KW ( IN 4 POLES ) Increase Safety Specification DESIGN - IS: 6381 / IS:9628 RATING - IS :325 DIMENSION - IS:1231(FOOT) | IS: 2223(FLANGE) Range( Type 'e'/ 'n') Frame : E90L - E355L kW : 0.75 - 315 KW ( IN 4 POLES WITH T3 RTG. )

OXFORD Motors is proud to introduce the IP55 Metric Motor line of rugged, all-purpose motors. The cast iron,totally enclosed fan cooled IP55 construction makes this motor the preferred choice for almost any application in even the toughest environments.

Type RW – A symbol of versatility The type RW motors have been designed basically for heavy duty use with driven machine imposing overloads and severe mechanical shocks and vibrations. These motors are equally suitable for smooth constant loads since the motors are also designed with high efficiency and power factor. Because of optimum utilisation of materials, with improved ventilation techniques the motors are 10 – 15% lighter in weight and yet more rugged because of their inherent special construction. Because of high Pull Out Torque and inherent thermal margin kept for high slip operation these motors are ideally suited for rerolling mills and cane cutter/cane crusher/care leveller/cane fiborizer applications pertaining to sugar industries. Because of high efficiency and power factor these mtors are also suitable for pump/fan applications.

Standard Standard Indian International IS IEC NEMA' Dimensions IS 1231 IEC 60072 - 1 MG1 Part 4 IS 2223 Performance IS 325 IEC 60034 - 1 MG1 Part 12 Output IS 1231 MG 1 Part 10 Protection IS 4691 IEC 60034 - 5 MG I - 1.268 Mounting 152253 IEC 60034 - 7 MGI NO 4

Electric vibrating motors (MVE) for general applications in various industrial sectors on machines and vibrating tables. Available in 2, 4, 6 and 8 poles, as well as in direct current with different voltages, they are suitable for use with inverters (variable frequency drive) and have a centrifugal force ranging from 20 to 30,000 kg, adjustable on each individual model.

Series No: Universal Motor For Washing Machine Power（W): 30~500 Outer diameter(mm): 119 Voltage（V): 110, 220, 230 Pole（P): 2 Frequency（Hz): 50, 60, 50/60

Series No: 5-250 Voltage（V): 110, 220, 230 Outer diameter(mm): 78, 95, 120 Frequency（Hz): 50, 60, 50/60 Pole（P): 4, 6, 8

Series No: Kitchen Soyabean Milk Machine MotorVoltage（V): 220 Power（W): 100 Frequency（Hz): 50 Outer diameter(mm): 42 Pole（P): 2

Voltage（V): DC240-340V Power（W): 60-500 Outer diameter(mm): 108 Pole（P): 8

Series No: Kitchen Mixer Motor Voltage（V): 120 Power（W): 1500 Frequency（Hz): 60 Outer diameter(mm): 98 Pole（P): 2

Series No: Vacuum cleaner motor Power（W): 700-130 Outer diameter(mm): 70, 95 Voltage（V): 120 Frequency（Hz): 60 Pole（P): 2

Series: KR Ex protection level: Ex d IIB or C T4 Gb and Ex de IIB or C T4 Gb Frame size: 500 - 1500 Voltages: 3 - 15 kV line and inverter operation Power output: 160 - 13.200 kW Frame construction: Fabricated steel Mounting arrangments: B3, V1 Degree of protection: IP55, IP65 Number of poles : 2 - 24 Temperature class: 155 (F) according to 130 (B) Certificates: ATEX, IEC-EX Cooling method: IC511

Series: KB / KF / KS Frame size: 400 - 1200 Voltages: 3 - 15 kV line and inverter operation Power output: 160 - 15.000 kW Frame construction: Fabricated steel Mounting arrangments: B3, V1, B35 Degree of protection: IP23 Number of poles : 2 - 24 Temperature class: 155 (F) according to 130 (B) Certificates: CE Cooling method: IC01, WPI, WPII Bearings: Roling elements or sleeve bearings

Series: KU Frame size: 400 - 1.200 Voltages: 2,3 - 15kV line and inverter operation Power output: 160 - 17.000kW Frame construction: Fabricated steel Mounting arrangments: B3, V1 Degree of protection: IP55, IP65 Number of poles : 2 - 24 Temperature class: 155 (F) according to 130 (B) Certificates: CE Cooling method: IC611 Bearings: Roling elements and sleeve bearings

Frame sizes 80 to 355 Construction: Cast Iron Frame sizes: 80 to 355 Output: 0.75kW to 400kW The W cast iron motor range covers products with outputs from as little as 0.75kW to 400kW in frame sizes 80 to 355L.They are suitable for use within a diverse range of applications from food and drink to china clay production. From roller table drives to refrigeration. Many applications often have adverse operating conditions including repeated starting and occasional overloading; the W cast iron range is well suited to these situations. A virtual go anywhere motor, this cast iron range has a full 3-year guarantee.

Series XSD Ultra,XSD Ultra 841,XSD Ultra 661 Voltages 230 - 575V line and inverter operation Frame size 143 - 449 Frame construction Cast iron Power output 1- 300 Hp Nema design A or B Mounting arrangements Foot, C-face, D-flange Temperature class Class F insulation Efficiency class NEMA Premium Cooling method TEFC, TENV, TEAO Number of poles 2, 4, 6 Certificates NEMA, UL, CSA, IEEE 45, 841, 112B, and GM 7E-TA Service factor 1.15 Balance and vibration ISO 1940 Grade 1, NEMA grade A

Series KE2 Ex protection level Ex II 2 G Ex e IIC T3 Gb Frame size 315 - 560 Voltages 3 - 11 kV line Power output 160 - 1.330 kW Frame construction Cast iron Mounting arrangments B3, B5, B35,V1 Degree of protection IP55,IP56, IP65 Number of poles 2 - 16 Temperature class 155 (F) according to 130 (B) Certificates ATEX, IEC-EX Cooling method IC411

Series KU Ex protection level Ex II 3G Ex nA IIC T3 Ex II 2G Ex e IIC T3 Gb Ex II 2G Ex px e ib IIC T3 Gb Frame size 400 - 1.200 Voltages 3 - 15 kV line and inverter operation Power output 160 - 17.000 kW Frame construction Fabricated steel Mounting arrangments B3, V1 Degree of protection IP55,IP65 Number of poles 2 - 24 Temperature class 155 (F) according to 130 (B) Certificates ATEX, IEC-EX Cooling method IC81W

Series Energy Saver Explosion Proof Voltages 230 - 575V line and inverter operation Frame size 143 - 449 Frame construction Cast iron Power output 1- 300 Hp Nema design B Mounting arrangements Foot, C-face, D-flange Temperature class Class F insulation Efficiency class NEMA Premium Cooling method TEFC Number of poles 2, 4, 6, 8 Certificates NEMA, UL, CSA, IEEE 112B Service factor 1.15 Hazardous areas Division 1 Class 1 (Gas) Groups C & D / Class 2 (Dust) Groups F & G

Series KA5 H-OPTIM Voltages 2,3 - 11kV line and inverter operation Frame size 315 - 560 Frame construction Cast Iron Power output 180 - 2.250kW Degree of protection IP55 Mounting arrangements B3, V1, B35 Temperature class 155 (F) according to 130 (B) Number of poles 2 - 12 Cooling method IC411, IC410, IC416 Bearings Roling elements and sleeve bearings Certificates CE, Zone 2/22 (IEC), Cl. I Div.2 (NEC)

Series PZ Voltages 3 - 13,8 kV Frame size 355 - 800 Frame construction Fabricated steel Power output 200 - 9.000 kW Degree of protection IP55, IP65 Mounting arrangments B3, V1 Temperature class 155 (F) according to 130 (B) Efficiency class Cooling method IC611 Number of poles 2 - 10 Certificates CE

Introducing our state-of-the-art Air Curtain Motor, the ultimate solution for maintaining indoor comfort while keeping unwanted elements at bay. Engineered with precision and innovation, this motor represents the pinnacle of modern air technology, promising unmatched efficiency and effectiveness in creating a barrier against external influences. At its core, our Air Curtain Motor harnesses the power of controlled air flow to create a seamless barrier between indoor and outdoor environments. By generating a powerful curtain of air across entrances and openings, it effectively prevents dust, insects, odors, and pollutants from infiltrating your space, ensuring a clean and comfortable interior environment. What sets our Air Curtain Motor apart is its versatility and adaptability. Whether it's a retail store, restaurant, warehouse, or office building, this motor seamlessly integrates into any setting, providing reliable protection against the elements while maintaining unobstructed access for people and vehicles. With customizable settings and intuitive controls.

Standards: IEC 60079 0, 1, 7, 31 IEC 60034 1, 2, 5, 6, 7, 8, 9, 12, 14, 30 IEC 60072 Ex d, Ex de / Ex-tb, Ex-tc ATEX category 2D, 2G, 2GD Group IIB, IIC Temperature Class T3, T4, T5, T6 Zones 1, 2 / 21, 22 Max surface temperature [C] T150, T135, T125, T100, T85 Protection IP55, IP56, IP65, IP66 Frame size from 71 to 160 (IEC) Power from 0.37 to 22kW Three phase 1 or 2 speed 400V, 50 Hz Poles: 2, 4, 6, 8 Self ventilated Available IE1, IE2 Available Atex, IECEx

Standards: IEC 60079 0, 1, 7, 31 IEC 60034 1, 2, 5, 6, 7, 8, 9, 12, 14, 30 IEC 60072 Ex d, Ex de / Ex-tb, Ex-tc ATEX category 2D, 2G, 2GD Group IIB, IIC Temperature Class T3, T4, T5, T6 Zones 1, 2 / 21, 22 Max surface temperature [C] T150, T135, T125, T100, T85 Protection IP55, IP56, IP65, IP66 Frame size from 63 to 355 (IEC) Power from 0.12 to 375kW Three phase 1 or 2 speed Single phase (frame size 63 100) 400V, 50 Hz Poles: 2, 4, 6, 8 Ventilated & with forced ventilation Available IE2, IE3 Available Atex, IECEx

Standards: IEC 60079 0, 1, 7, 31 IEC 60034 1, 2, 5, 6, 7, 8, 9, 12, 14, 30 IEC 60072 Ex d, Ex de / Ex-tb, Ex-tc ATEX category 2D, 2G, 2GD Group IIB, IIC Temperature Class T3, T4, T5, T6 Zones 1, 2 / 21, 22 Max surface temperature [C] T150, T135, T125, T100, T85 Protection IP55, IP56, IP65, IP66 Frame size from 90 to 160 (IEC) Power from 1.1 to 22kW Three phase 1 or 2 speed 400V, 50 Hz Poles: 2, 4, 6, 8 With forced ventilation Available IE1, IE2 Available Atex, IECEx

Standards: IEC 60079 0, 1, 7, 31 IEC 60034 1, 2, 5, 6, 7, 8, 9, 12, 14, 30 IEC 60072 Ex d, Ex de / Ex-tb, Ex-tc ATEX category 2D, 2G, 2GD Group IIB, IIC Temperature Class T3, T4, T5, T6 Zones 1, 2 / 21, 22 Max surface temperature [C] T150, T135, T125, T100, T85 Protection IP55, IP56, IP65, IP66 Frame size from 80 to 315 (IEC) Power from 0.75 to 200kW Three phase 1 or 2 speed 400V, 50 Hz Poles: 2, 4, 6, 8 Ventilated & with forced ventilation Available IE3 Available Atex, IECEx

Specifications Frames: 71 to 315L Rating: 0.12 to 120.0 kW Poles: 4/2, 8/4, 6/4, 8/6 & others Mountings: B3, B5, B14 & combinations Protection: IP55 Enclosure: TEFC

Standards: IEC 60079 0, 1, 7 IEC 60034 1, 2, 5, 6, 7, 8, 9, 12, 14, 30 IEC 60072 Ex d, Ex de ATEX category 1M2 Group I (mine) Protection IP55, IP65, IP66 Frame size from 63 to 355 (IEC) Power from 0.12 to 375kW Three phase 1 or 2 speed 400V, 50 Hz Poles: 2, 4, 6, 8 Ventilated & with forced ventilation Available IE3, IE4 Available Atex, IECEx

Specifications Frames: 63 to 160L Rating: 0.037 to 5.5 kW Poles: 4, 6 & 8 Mountings: B3, B5, B14 or special Protection: IP55 Enclosure: Totally enclosed or force cooled Torque: 0.048 to 3.57 kg.m

Overview NEMA platform --highest power producing DC motor product available. The power dense low profile design makes it easy to displace the competition and integrate into almost any existing application. Sizes 93 - 895 kW, 125 - 1,250 Hp NEMA Features Compensated windings provide linear torque per amp and better commutating during overload conditions. self monitoring brush wear system, rotatable rocker ring for easy brush change, reduced maintenance design technologies Suggested applications Pulp and paper processing, extruders, conveyors, test stands, stamping press, crane and hoist, rolling mills, machine tools, ski lift, etc.

Overview Laminated frame design provides more power, reliability and serviceability in a smaller package. A larger armature allows optimum power generation and better ventilation for heat dissipation than standard round frame motors. Sizes 3.7 - 372 kW, 5 - 500 Hp NEMA & IEC Features A variety of enclosure styles are available to meet customer environmental conditions. Suggested applications Mill drives, tube mills, coating lines, winders, printing presses, extruders, mixers, spindle drives

Overview IEC platform - highest power producing DC motor product available. The power dense low profile design makes it easy to displace the competition and integrate into almost any existing application. Sizes 22 - 1305 kW, 30 - 1,751 Hp IEC Features All enclosure types (DPBV,TEDC-AA, TEDC-AW), self monitoring brush wear system, rotatable rocker ring for easy brush change, reduced maintenance design technologies. Suggested applications Pulp and paper processing, extruders, conveyors, test stands, stamping press, crane and hoist, rolling mills, machine tools, ski lift, etc.

Overview For adjustable speed operation from SCR controls, two designs are available - wound field and permanent magnet. 20:1 constant torque speed range with 90 to 180 VDC armatures. Sizes 0.01 - 2.23 kW, 0.02 - 3 Hp wound field NEMA & IEC 0.18 - 3.73 kW, 0.02 - 5 Hp permanent magnet NEMA & IEC Features Motor construction and features can be tailored for specific applications and industries. Suggested applications Conveyors, extruders, packaging equipment, mixers, winders, printing presses, and metering pumps

Overview All stainless steel construction and laser marked nameplate makes SSBSM suitable for pharmaceutical and food processing industries. Sizes 1.2 - 134 Nm continuous torque Features 3 - 4x continuous torque Totally enclosed, CE/cURus A completely encapsulated winding allows heat to dissipate while protecting internal components from contamination. IP67 rated enclosure for washdown conditions BISSC - complies with Baking Industry Sanitation Standards Committee Suggested applications Packaging, food handling, bakery machinery, beverage equipment, measuring dispensing equipment

Overview Right angle and parallel shaft designs for industrial applications precision matched AC motor and gear ratios for optimized performance Sizes 0.56 - 124 Nm, 5 - 1,100 in.-lbs., output torque Features Each unit is factory filled with synthetic oil and lubricated for life maximum efficiency and reduced maintenance. Right angle configurations feature exclusive internal expansion bladder to keep lubrication in and contamination out. Suggested applications Material handling, packaging machinery, machine tools, conveyors, printing presses, commercial ovens, car washes

Overview Motors designed with bonded neodymium magnets and medium inertia rotor for load inertia matching Sizes 1.2 - 134 Nm continuous torque Features 3x continuous torque Totally enclosed, CE/cURus A completely encapsulated winding allows heat to dissipate while protecting internal components from contamination. Multiple feedback types to fit a range of applications Suggested applications Cut-to-length, flying shear, machining, labeling, material handling, winding, robotics

GPN SERIES 300 MM - 450 MM Improved aesthetics Extruded al. Carcase Pressure diecast brackets Double sealed prelubricated bearings Major Applications Desert Cooling or Evaporative Cooling Transformer Cooling, Condenser Cooling Chiller Ventilation Axial Flow Fans Range : Air flow from 1000 m3/hr to 350000 m3/hr with Static pressure from Free flow to 135 mm wg subject to a maximum Motor rating of 75KW. Sweep : 12"" to 75"" Speed : 725 to 2950 rpm Impeller : Die Cast Aluminum alloy having Aerofoil blades with adjustable angle Man Cooler Size : 19"" to 48"" ( 5 Sizes) Type : Tubular, Pedestal, Bracket Type Air Qty. : 22000 M3/hr to 74500 M3/hr at 10 times Blade Sweep Speed : 960 to 2900 Rpm "

MARATHON Electric presents CHALLENGER Series TEFC Squirrel cage motors with excellent product features and outstanding performance parameters. Range 0.25 kW to 400 kW Frame IEC 80 to 355 in cast iron Mounting Foot/Flange/Face Pole 2 to 8 Others on request Frequency 50 or 60 Hz Ambient -40 to 65 C Others on request Protection IP 55 Others on request Feature Complying to all international standards Totally enclosed fan cooled sq. cage Alpower Aluminium Body squirrel cage motors upto IEC frame 180L Challenger series squirrel cage motors Integral feet rugged cast iron construction Energy efficient eff2/eff1 Rationalized product features Eff 1 in line with is:12615 / CMEP 600% max. stg. current Rtd / btd ( frame 280 onward ) Low noise level 60hz. supply ce / csa marking Class hinsulation 55 deg. ambient APPROVED BY MAJOR CONSULTANTS LIKE NTPC / BHEL / EIL

Grove Gears aluminum ratio multipliers are lightweight and paint-free alternative to cast iron options. The dual purpose design can be used as a stand-alone single reduction inline reducer or as a bolt-on to the input of any c-faced gear reducer to multiply overall reduction ratio. Specification Available with ratings to 6 HP.� Ratios from 2:1 to 7.2:1. Standard Features Aluminum housing. Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant USDA Class H1 approved. Viton double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.� C Flange or solid input styles available. 56C - 210TC input/output. Helical gearing to optimize system efficiency. "

When size and weight are critical requirements in your power transmission package, the Grove Gear Quadro Aluminum Worm Gear reducer offers an ideal solution. The Quadro is up to one third smaller than alternatives and features an aluminum alloy housing making it a compact and lightweight solution for difficult installations. Specification Center Distances from 1.77"" to 3.35"" Four sizes available with ratings to 8 HP Available in single and double reduction Ratios�from 7:1 to 4020:1. Standard Features Unique square design eliminates the need for mounting feet Available with any combination of Nema or IEC input and output Factory-filled with premium Mobil Glygoyle 460�polyalkalene glycol lubricant Vent free design to eliminate leaks Available pre-assembled with LEESON motors for the�perfect GEAR+MOTOR package Mounting dimensions are interchangeable with many�major brands Accessories Style F - Short Output Flange Style FL -�Long Output Flange R Reaction Arm

Grove Gears aluminum ratio multipliers are lightweight and paint-free alternative to cast iron options. The dual purpose design can be used as a stand-alone single reduction inline reducer or as a bolt-on to the input of any c-faced gear reducer to multiply overall reduction ratio. Specification Available with ratings to 6 HP.� Ratios from 2:1 to 7.2:1. Standard Features Aluminum housing. Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant USDA Class H1 approved. Viton double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.� C Flange or solid input styles available. 56C - 210TC input/output. Helical gearing to optimize system efficiency.

Grove Gear offers a full line of Ratio Multipliers. The dual purpose design can be used as a stand-alone single reduction inline reducer or as a bolt-on to the input of any c-faced gear reducer to multiply overall reduction ratio. Specification Available with ratings to 20 HP.� Ratios from 2:1 to 7.5:1. Standard Features Cast iron housing. Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant USDA Class H1 approved. Viton double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.� C Flange or solid input styles available. 180TC to 210TC input/output. Helical gearing to optimize system efficiency.

Overview Innovative, NEMA drop-in replacement motor achieves leading efficiency and lower lifetime operational costs. Sizes 7.5 - 74.5 kW, 10 - 100 Hp totally enclosed - fan cooled, three phase

Overview High torque NEMA design A motor that exceeds NEMA design C torques. Sizes 3.7 - 373 kW, 5 - 500 Hp totally enclosed, three phase