Power Transmission

Overview Designed as dual rated for either in or out of air stream vane axial fan applications Sizes 1.12 - 11.2 kW, 1.5 - 15 Hp open air over, totally enclosed,single and three phase

Overview UL & CSA listed for Class I, Group D; Class I, Group C & D; Class I, Group D, Class II, Group F & G. Sizes 0.37 - 150 kW, 0.25 - 200 Hp totally enclosed, three phase

Overview V*S master motors provide continuous constant torque performance (1000:1) across the entire speed range from zero speed to base speed. Sizes 0.25 - 372 kW, 1/3 - 500 Hp totally enclosed, three phase

Overview Available for both wet & dry pit applications. Wet pit motors use effluent for cooling and can run 15 minutes in air. Dry pit motors are designed to run continuously in air or submerged when properly applied. Sizes 0.75 - 74.57 kW, 1 - 100 Hp totally enclosed, three phase 0.75 - 3.73 kW, 1 - 5 Hp totally enclosed, single phase

Overview Custom Immersible motors are designed for use in non-hazardous area dry pit applications where the possibility of flooding exists. Sizes 3.73 - 186 kW, 5 - 250 Hp totally enclosed, three phase

Overview UL & CSA approved for Class I, Group D; Class I, Group D, Class II, Group F & G; Class I, Group C & D, Class II Group F & G. Sizes 0.18 - 224 kW, 0.25 - 300 Hp totally enclosed, single and three phase

Overview Motors designed and manufactured for normal, medium and high thrust applications. Sizes 1.11 - 56 kW, 1.5 - 75 Hp totally enclosed 1.49 - 45 kW, 2 - 60 Hp open drip proof

Overview UL & CSA approved for Class I, Group D; Class I, Group D, Class II, Group F & G; Class I, Group C & D, Class II Group F & G. Sizes 2.2 - 111 kW, 3 - 150 Hp totally enclosed, three phase

Overview Jet pump motor for residential and industrial applications Sizes 0.18 - 5.6 kW, 0.25 - 7.5 Hp totally enclosed, three phase 0.18 - 5.6 kW, 0.25 - 7.5 Hp open drip proof, three phase 0.09 - 3.7 kW, 0.13 - 5 Hp totally enclosed, single phase 0.09 - 5.6 kW, 0.13 - 7.5 Hp open drip proof, single phase

Overview Motors designed to meet the requirements for fire pumps. Sizes 7.45 - 398 kW, 1 - 400 Hp open drip proof, three phase

Overview Baldor-Reliance food safe motors, designed with smooth contours and advanced sealing, exceed IP69K for water to maximize motor life in high pressure, sanitary cleaning environments. Sizes 0.37 - 29 kW, 0.5 - 30 Hp, three phase 0.37 - 0.75 kW, 0.5 - 1 Hp, single phase

Overview Motor that meets and exceeds the requirements of IEEE Std. 841 - 2009 with the exception of using Mobility grease for exceptional roller bearing performance. Sizes 3.7 - 60 kW, 5 - 75 Hp totally enclosed, three phase

Overview High torque NEMA design A motor that exceeds NEMA design C torques. Sizes 3.7 - 373 kW, 5 - 500 Hp totally enclosed, three phase

Overview Designed for use where additional protection is required against wet and washdown environments, corrosive environments and marine applications. Sizes 0.37 - 7.5 kW, 0.5 - 10 Hp totally enclosed, three phase

Overview Designed for environments where washdown cleaning occurs with caustic solutions and high-pressure sprays. Sizes 0.37 - 11 kW, 0.5 - 15 Hp totally enclosed, three phase

Overview High torque design C, steel band frame and fan cover Sizes 1.5 - 7.5 kW, 2 - 10 Hp totally enclosed, three phase

Overview Designed for environments where washdown cleaning occurs. Sizes 0.25 - 15 kW, 0.33 - 20 Hp, single & three phase

GPN SERIES 300 MM - 450 MM Improved aesthetics Extruded al. Carcase Pressure diecast brackets Double sealed prelubricated bearings Major Applications Desert Cooling or Evaporative Cooling Transformer Cooling, Condenser Cooling Chiller Ventilation Axial Flow Fans Range : Air flow from 1000 m3/hr to 350000 m3/hr with Static pressure from Free flow to 135 mm wg subject to a maximum Motor rating of 75KW. Sweep : 12"" to 75"" Speed : 725 to 2950 rpm Impeller : Die Cast Aluminum alloy having Aerofoil blades with adjustable angle Man Cooler Size : 19"" to 48"" ( 5 Sizes) Type : Tubular, Pedestal, Bracket Type Air Qty. : 22000 M3/hr to 74500 M3/hr at 10 times Blade Sweep Speed : 960 to 2900 Rpm "

MARATHON Electric presents CHALLENGER Series TEFC Squirrel cage motors with excellent product features and outstanding performance parameters. Range 0.25 kW to 400 kW Frame IEC 80 to 355 in cast iron Mounting Foot/Flange/Face Pole 2 to 8 Others on request Frequency 50 or 60 Hz Ambient -40 to 65 C Others on request Protection IP 55 Others on request Feature Complying to all international standards Totally enclosed fan cooled sq. cage Alpower Aluminium Body squirrel cage motors upto IEC frame 180L Challenger series squirrel cage motors Integral feet rugged cast iron construction Energy efficient eff2/eff1 Rationalized product features Eff 1 in line with is:12615 / CMEP 600% max. stg. current Rtd / btd ( frame 280 onward ) Low noise level 60hz. supply ce / csa marking Class hinsulation 55 deg. ambient APPROVED BY MAJOR CONSULTANTS LIKE NTPC / BHEL / EIL

Grove Gears aluminum ratio multipliers are lightweight and paint-free alternative to cast iron options. The dual purpose design can be used as a stand-alone single reduction inline reducer or as a bolt-on to the input of any c-faced gear reducer to multiply overall reduction ratio. Specification Available with ratings to 6 HP.� Ratios from 2:1 to 7.2:1. Standard Features Aluminum housing. Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant USDA Class H1 approved. Viton double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.� C Flange or solid input styles available. 56C - 210TC input/output. Helical gearing to optimize system efficiency. "

Grove Gears aluminum ratio multipliers are lightweight and paint-free alternative to cast iron options. The dual purpose design can be used as a stand-alone single reduction inline reducer or as a bolt-on to the input of any c-faced gear reducer to multiply overall reduction ratio. Specification Available with ratings to 6 HP.� Ratios from 2:1 to 7.2:1. Standard Features Aluminum housing. Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant USDA Class H1 approved. Viton double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.� C Flange or solid input styles available. 56C - 210TC input/output. Helical gearing to optimize system efficiency.

Grove Gear offers a full line of Ratio Multipliers. The dual purpose design can be used as a stand-alone single reduction inline reducer or as a bolt-on to the input of any c-faced gear reducer to multiply overall reduction ratio. Specification Available with ratings to 20 HP.� Ratios from 2:1 to 7.5:1. Standard Features Cast iron housing. Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant USDA Class H1 approved. Viton double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.� C Flange or solid input styles available. 180TC to 210TC input/output. Helical gearing to optimize system efficiency.

Overview Innovative, NEMA drop-in replacement motor achieves leading efficiency and lower lifetime operational costs. Sizes 7.5 - 74.5 kW, 10 - 100 Hp totally enclosed - fan cooled, three phase

Overview High torque NEMA design A motor that exceeds NEMA design C torques. Sizes 3.7 - 373 kW, 5 - 500 Hp totally enclosed, three phase

Overview Baldor's extensive line of General Purpose three phase motors are available in totally enclosed cast iron and industrial steel band for harsh applications. Designed for ""general purpose"" use means that these motors can be used in many applications. The Super E Motors (EM & CEM) provide NEMA Premium efficiency and are designed as standard to be inverter ready with wide variable torque speed ranges. Features Suitable for mounting in any position Ball bearings Heavy-gauge steel or cast-iron frames, and gasketed conduit boxes EM Super-E motors have NEMA Premium efficiency, Class F insulation, 1.15 service factor and 3 year warranty Motors with TR suffix have roller bearings for heavy belted loads Common Industries Aggregate & Cement Air Handling Chemical, Oil, & Gas Food, Beverage, & Pharmaceutical Paper & Forest Unit & Baggage Handling Common Applications Compressors Pumps Fans Conveyors Material Handling Machine Tool

Overview Our extensive line of General Purpose three phase open motors are available in cast iron and industrial steel. Designed for ""general purpose"" use means that these motors can be used in many applications. The Super E Motors (EM & CEM) provide NEMA Premium efficiency and are designed as standard to be inverter ready with wide variable torque speed ranges. Features Suitable for mounting in any position Ball bearings Heavy-gauge steel or cast-iron frames, and gasketed conduit boxes EM Super-E motors have NEMA Premium efficiency, Class F insulation, 1.15 service factor and 3 year warranty Motors with TR suffix have roller bearings for heavy belted loads Common Industries Aggregate & Cement Air Handling Chemical, Oil, & Gas Food, Beverage, & Pharmaceutical Paper & Forest Unit & Baggage Handling Common Applications Compressors Pumps Fans Conveyors Material Handling Machine Tool

Overview We offer an extensive line of General Purpose single phase open motors. In applications where only single phase power is utilized, these motors are available from 1/12 Hp through 10 Hp in ODP designs. Standard foot mounted configurations are available, as well as C-Face foot mounted and C-Face footless. These are also offered in 1/4 Hp through 5 Hp as Super-E Premium Efficient motors where energy savings is desired. Features Available from 1/12 Hp through 10 Hp in ODP designs Standard foot mounted configurations are available, as well as C-Face foot mounted and C-Face footless Also offered in 1/4 Hp through 3 Hp as Super-E Premium Efficient motors (to meet efficiency requirements for Small Motor Rule) Common Industries Aggregate & Cement Air Handling Chemical, Oil, & Gas Food, Beverage, & Pharmaceutical Paper & Forest Unit & Baggage Handling Common Applications Compressors Pumps Fans Conveyors Material Handling Machine Tool

Overview We offer an extensive line of General Purpose single phase enclosed motors. In applications where only single phase power is utilized, these motors are available from 1/12 Hp through 15 Hp in TEFC designs. Standard foot mounted configurations are available, as well as C-Face foot mounted and C-Face footless. These are also offered in 1/4 Hp through 5 Hp as Super-E Premium Efficient motors where energy savings is desired. Features Are available from 1/12 Hp through 15 Hp in TEFC designs Standard foot mounted configurations are available, as well as C-Face foot mounted and C-Face footless Also offered in 1/4 Hp through 5 Hp as Super-E Premium Efficient motors Common Industries Aggregate & Cement Air Handling Chemical, Oil, & Gas Food, Beverage, & Pharmaceutical Paper & Forest Unit & Baggage Handling Common Applications Compressors Pumps Fans Conveyors Material Handling Machine Tool

The Converter Duty motors for Constant Torque applications are offered from 11kW to 315kW in 2, 4, 6 & 8Pole with TEFC Enclosure IC416 separately cooled. The Reference Standard for these motors is IS: 325 / IEC: 60034-1. The 1PQ0 Series motors are offered for an Ambient of 50C, for Altitude < 1000m, with Class F insulation. These motors are provided with dual coat copper wires which has superior electrical, mechanical and thermal properties. Type : Three-phase squirrel-cage induction motors Output : 11 kw 315 kW Frame Size : 160M 355L

ABBs process performance IE3 premium efficiency motors are best suited for process industries where quality, robustness and reliability are paramount. With ABB quality and support these motors have features appreciated by industry customers. Motors have IE3 efficiency. The robust, straightforward General performance IE3 motors meet all basic requirements and are available off-the-shelf. They are ideal for OEMs to build into pumps and fans, as well as for other applications including gearboxes, conveyors and general machinery. The extended range of variants provides considerable flexibility. Motor Types : M2BAX Output : 7.5 TO 355 KW IEC FRAME SIZE : 132 TO 355

The 1LA0 Dual Speed motors are offered in 4/2 Pole & 8/4 Pole in various kW combinations. These squirrel cage Induction motors confirming to IS: 325 are offered in Cast Iron housing with IP 55 protection and with IC411 cooling. These motors are suitable for 415 V + 6%, 50Hz + 3% and an Ambient of 40C. Type : Dual Speed Motors Output : 5.5/10 KW to 100/120 KW Poles : 4/2 Pole & 8/4 Pole

Overview Totally-enclosed, XP motors designed for underground coal mining, coal preparation, or transportation of mined coal. Sizes AC: 2-225 kW, 5-300 Hp, 230-1000 VAC, TEFC, TENV, or TEWC; NEMA & IEC frame sizes DC: 20-50 Hp, 110-460 VDC, TENV or TEWC, NEMA frame sizes Features Designed and certified for hazardous mining atmospheres. Meets or exceeds global high efficiency energy standards. Special shaft configurations, double shaft extensions, and flange mounting configurations available. Global certifications include MSHA, ATEX, ANZEx, and IECEx. Suggested applications Pumps, fans, conveyors, and traction motors for continuous and longwall miners, feeder breakers, roof bolters, and haulers/scoops.

Overview Specially modified motors designed for above deck and offshore (wet environments) and below deck (dry environments) capable of meeting multiple Marine agency certifications and requirements. Sizes .2-1,500Hp, .1-1,120kW: 115-4000 VAC, TEFC, TENV, DPP, or TEWC: NEMA & IEC frame sizes Features Marine duty epoxy paint, corrosion resistant hardware, commercial VPI windings, steel, casting iron, or ductile iron construction, spraytight, watertight, explosion proof enclosures. Certifications include: ABS, Lloyds Registry, DNV, USCG-256, IEEE-45-2002, and NEMA MG1 Suggested applications Pumps, fans, deck equipment, thrusters, auxiliary propulsion, winches, capstans

Overview Right angle and parallel shaft designs for industrial applications with precision matched DC motor and gear rations for optimized performance Sizes 0.85 - 124 Nm, 7.5 - 1,100 in.-lbs., output torque Features Armature / rotor is dynamically balanced for vibration free operation. Each unit is factory filled with synthetic oil and lubricated for life maximum efficiency and reduced maintenance. Suggested applications Material handling, packaging machinery, machine tools, conveyors, printing presses, commercial ovens, car washes

Overview Industrial belt sanders Sizes 0.25 - 1.12 kW, 0.25-1.5 Hp, three phase Features There are several industrial belt sander options, fixed and tiltable belts, grinder/sanders and even an adjustable speed sander for increased flexibility. All units come with a base mounted on/off switch. 602E-MT equipped with 2x36" 100 grit belt, all others 2x48" 80 grit belt. Suggested applications Sanding

Overview Industrial polishing lathes Sizes 0.19 - 0.56 kW, 0.25 - 0.75 Hp, single phase Features All lathes are supplied with 8-foot cord with plug, rubber feet and heavy construction to minimize vibration. Provisions for mounting to a laboratory bench are provided. Suggested applications Polishing - dental labs, jewelers, lapidary

OXFORD Motors is proud to introduce the IP55 Metric Motor line of rugged, all-purpose motors. The cast iron,totally enclosed fan cooled IP55 construction makes this motor the preferred choice for almost any application in even the toughest environments.

Type RW – A symbol of versatility The type RW motors have been designed basically for heavy duty use with driven machine imposing overloads and severe mechanical shocks and vibrations. These motors are equally suitable for smooth constant loads since the motors are also designed with high efficiency and power factor. Because of optimum utilisation of materials, with improved ventilation techniques the motors are 10 – 15% lighter in weight and yet more rugged because of their inherent special construction. Because of high Pull Out Torque and inherent thermal margin kept for high slip operation these motors are ideally suited for rerolling mills and cane cutter/cane crusher/care leveller/cane fiborizer applications pertaining to sugar industries. Because of high efficiency and power factor these mtors are also suitable for pump/fan applications.

Standard Standard Indian International IS IEC NEMA' Dimensions IS 1231 IEC 60072 - 1 MG1 Part 4 IS 2223 Performance IS 325 IEC 60034 - 1 MG1 Part 12 Output IS 1231 MG 1 Part 10 Protection IS 4691 IEC 60034 - 5 MG I - 1.268 Mounting 152253 IEC 60034 - 7 MGI NO 4

Use of these motors can lead to substantial reduction in energy costs. The payback periods are in the order of 3 to 6 months depending upon the usage. Replacing existing motors with High Efficiency IE2 Motors even in power intensive industries gives a payback within 1 to 2 years. Output 0.37 Kw to 315 Kw Frame 71 to 355 L Pole 2, 6, 4 Voltage 415 +/- 10% Frequency 50 Hz +/- 10% Construction Flameproof / Safe area Near uniform efficiency from 50% to 100% of full load Insulation class F. Temperature rise limited to 70C over ambient of 50C Voltage variation: 10% Frequency variation: 5% Combined variation: 10% Enclosure: IP55 Ratings above 355kW up to 1250kW are available in frame 400 and 450. Please contact our Marketing / Sales Office for more details.

Standards: IEC 60079 0, 15 IEC 60034 1, 2, 5, 6, 7, 8, 9, 12, 14, 30 IEC 60072 II 3G Ex nA IIC TGc II 3G Ex nA IIB TGc II 2D Ex tb IIIC TDb IP65 II 2D Ex tb IIIB TDb IP65 II 3D Ex tb IIIC TDb IP65 II 3D Ex tb IIIB TDb IP65 ATEX category 3G, 2D, 3D Temperature Class T3 Zones 2 / 21, 22 Max surface temperature [C] T150, T135, T125, T100, T85 Protection IP55, IP56, IP65, IP66 Frame size from 63 to 355 (IEC) Power from 0.12 to 375kW Three phase 1 or 2 speed 400V, 50 Hz Poles: 2, 4, 6, 8 Ventilated & with forced ventilation Available IE1, IE2 Available Atex, IECEx

Standards: IEC 60079 0, 1, 7, 31 IEC 60034 1, 2, 5, 6, 7, 8, 9, 12, 14, 30 IEC 60072 Ex d, Ex de / Ex-tb, Ex-tc ATEX category 2D, 2G, 2GD Group IIB, IIC Temperature Class T3, T4, T5, T6 Zones 1, 2 / 21, 22 Max surface temperature [C] T150, T135, T125, T100, T85 Protection IP55, IP56, IP65, IP66 Frame size from 63 to 160 (IEC) Power from 0.12 to 22kW Three phase 1 or 2 speed 400V, 50 Hz Poles: 2, 4, 6, 8 Not ventilated Available IE1, IE2 Available Atex, IECEx

Standards: IEC 60079 0, 1, 7, 31 IEC 60034 1, 2, 5, 6, 7, 8, 9, 12, 14, 30 IEC 60072 Ex d, Ex de / Ex-tb, Ex-tc ATEX category 2D, 2G, 2GD Group IIB, IIC Temperature Class T3, T4, T5, T6 Zones 1, 2 / 21, 22 Max surface temperature [C] T150, T135, T125, T100, T85 Protection IP55, IP56, IP65, IP66 Frame size from 180 to 315 (IEC) Power from 18.5 to 200kW Three phase 1 or 2 speed 400V, 50 Hz Poles: 2, 4, 6, 8 Not ventilated Available IE1, IE2 Available Atex, IECEx

Standards: IEC 60034-1, 2, 5, 6, 7, 8, 9, 12, 14, 30 IEC 60072 COO Europe available Protection IP55, IP56, IP65, IP66 Frame size from 80 to 355 (IEC) Power 0,75 375 kW 400V, 50Hz (multi-voltage 380-400-420V/50Hz and 460V/60Hz) Pole 2, 4, 6, 8 Self-cooling (IC411); Forced cooling (IC416), not ventilated (IC410), totally enclosed air over (IC418) Premium Efficiency IE3; Super-Premium Efficiency IE4 Certified GMEE

Standards: IEC 60034-1, 2, 5, 6, 7, 8, 9, 12, 14, 30 IEC 60072 COO Europe available Protection IP55, IP56, IP65, IP66 Frame size from 80 to 355 (IEC) Power 0,75 375 kW 400V, 50Hz (multi-voltage 380-400-420V/50Hz and 460V/60Hz) Pole 2, 4, 6, 8 Self-cooling (IC411); Forced cooling (IC416), not ventilated (IC410), totally enclosed air over (IC418) Premium Efficiency IE3; Super-Premium Efficiency IE4 Certified GMEE

The 1PT0 special textile application motors are offered from 30kW -55kW in 4Pole. These highly energy efficient motors are made exclusively for textile ring frames with IC417 cooling. These motors are suitable for 415 V + 10%, 50Hz + 5% and an Ambient of 50C. Type : Textile Motors Output : 30 KW to 55 KW Poles : 4 Pole

CAST IRON MOTORS Range 0.37 kW to 375 kW Frame IEC 80 to 355 in cast iron Mounting Foot/Flange/Face Pole 2 to 10 Others on request Frequency 50 or 60 Hz Ambient -40 to 65 C Others on request Protection IP 55 Others on request Feature Complying to all international standards ALUMINIUM MOTORS Range 0.18 kW to 15 kW Frame IEC 63 to 160 in Aluminum Mounting Foot/Flange/Face Pole 2 to 8 Other on request Frequency 50 or 60 Hz Ambient -40 to 50 C other on request Protection IP 55 other on request Feature CSA,CE approved

Standards: IEC 60079 0, 1, 7, 31 IEC 60034 1, 2, 5, 6, 7, 8, 9, 12, 14, 30 IEC 60072 Ex d, Ex de / Ex-tb, Ex-tc ATEX category 2D, 2G, 2GD Group IIB, IIC Temperature Class T3, T4, T5, T6 Zones 1, 2 / 21, 22 Max surface temperature [C] T150, T135, T125, T100, T85 Protection IP55, IP56, IP65, IP66 Frame size from 71 to 160 (IEC) Power from 0.37 to 22kW Three phase 1 or 2 speed 400V, 50 Hz Poles: 2, 4, 6, 8 Self ventilated Available IE1, IE2 Available Atex, IECEx

Standards: IEC 60079 0, 1, 7, 31 IEC 60034 1, 2, 5, 6, 7, 8, 9, 12, 14, 30 IEC 60072 Ex d, Ex de / Ex-tb, Ex-tc ATEX category 2D, 2G, 2GD Group IIB, IIC Temperature Class T3, T4, T5, T6 Zones 1, 2 / 21, 22 Max surface temperature [C] T150, T135, T125, T100, T85 Protection IP55, IP56, IP65, IP66 Frame size from 63 to 355 (IEC) Power from 0.12 to 375kW Three phase 1 or 2 speed Single phase (frame size 63 100) 400V, 50 Hz Poles: 2, 4, 6, 8 Ventilated & with forced ventilation Available IE2, IE3 Available Atex, IECEx

Standards: IEC 60079 0, 1, 7, 31 IEC 60034 1, 2, 5, 6, 7, 8, 9, 12, 14, 30 IEC 60072 Ex d, Ex de / Ex-tb, Ex-tc ATEX category 2D, 2G, 2GD Group IIB, IIC Temperature Class T3, T4, T5, T6 Zones 1, 2 / 21, 22 Max surface temperature [C] T150, T135, T125, T100, T85 Protection IP55, IP56, IP65, IP66 Frame size from 90 to 160 (IEC) Power from 1.1 to 22kW Three phase 1 or 2 speed 400V, 50 Hz Poles: 2, 4, 6, 8 With forced ventilation Available IE1, IE2 Available Atex, IECEx

Standards: IEC 60079 0, 1, 7, 31 IEC 60034 1, 2, 5, 6, 7, 8, 9, 12, 14, 30 IEC 60072 Ex d, Ex de / Ex-tb, Ex-tc ATEX category 2D, 2G, 2GD Group IIB, IIC Temperature Class T3, T4, T5, T6 Zones 1, 2 / 21, 22 Max surface temperature [C] T150, T135, T125, T100, T85 Protection IP55, IP56, IP65, IP66 Frame size from 180 to 315 (IEC) Power from 15 to 200kW Three phase 1 or 2 speed 400V, 50 Hz Poles: 2, 4, 6, 8 With forced ventilation Available IE1, IE2 Available Atex, IECEx

Standards: IEC 60079 0, 1, 7, 31 IEC 60034 1, 2, 5, 6, 7, 8, 9, 12, 14, 30 IEC 60072 Ex d, Ex de / Ex-tb, Ex-tc ATEX category 2D, 2G, 2GD Group IIB, IIC Temperature Class T3, T4, T5, T6 Zones 1, 2 / 21, 22 Max surface temperature [C] T150, T135, T125, T100, T85 Protection IP55, IP56, IP65, IP66 Frame size from 80 to 315 (IEC) Power from 0.75 to 200kW Three phase 1 or 2 speed 400V, 50 Hz Poles: 2, 4, 6, 8 Ventilated & with forced ventilation Available IE3 Available Atex, IECEx

Standards: IEC 60079 0, 1, 7 IEC 60034 1, 2, 5, 6, 7, 8, 9, 12, 14, 30 IEC 60072 Ex d, Ex de ATEX category 1M2 Group I (mine) Protection IP55, IP65, IP66 Frame size from 63 to 355 (IEC) Power from 0.12 to 375kW Three phase 1 or 2 speed 400V, 50 Hz Poles: 2, 4, 6, 8 Ventilated & with forced ventilation Available IE3, IE4 Available Atex, IECEx

Specifications Frames: 71 to 355L Rating: 0.12 to 150.0 kW Poles: 4/2, 8/4, 6/4, 8/6 & others Mountings: B3, B5, B14 & combinations Protection: IP55 Enclosure: TEFC

Introduction Cooling tower motors are specially designed flange mounted motors in totally enclosed construction to suit air conditioning & refrigeration industries. They are provided with special long shaft construction with external threaded end to directly mount the fan blades. This also helps in the better cooling of the motor. Motors are compact in design & less in weight to facilitate easy maintenance. They are available as standard catalogue designs or as custom built. Range Power: 0.37 to 37.0 kW Polarity: 4P, 6P, 8P, 10P & 12P Mounting: B5 flange mounted Frame size: 71 to 315 Voltage: 415V 10% or as required Frequency: 50Hz 5% or as required Ambient: 45C. Altitude: up to 1000m above msl Enclosure: Totally Enclosed Non Ventilated (TENV) / TEFC Protection: IP55 Ins. class: Class F with temp. rise limited to class B. Duty: S1 Specifications Frames: 71 to 315 Rating: 0.37 to 37.0 kW Poles: 4, 6, 8, 10 & 12 Mountings: B3 or B5 Protection: IP55 Enclosure: TENV, TEFC

Execution & Features FEATURES VALUES/ STANDARDS Starting Star Delta Permissible starts/hr. Cold successive - 4 , Hot successive - 3, Equally spread - 6 Loading at reduced volts 75% Rated volts for 5 minutes. Insulation / temp.rise Class `F' / 70C Direction of rotation Anti-clockwise from top. No. Of leads 6 for all frames Connection. Delta for all ratings Degree of protection /Mounting IP 21/ IM 3239 HS Method of cooling IC 01 T.box position On body circumference. Bearing life (90% survival basis) 40,000 working hrs Vibration Normal class as per IS: 12075 Noise As per IS: 12065 Construction Flange mounted with hollow shaft Frame sizes SVH160, 180, 200, 250 ,280 and 315 Body material Cast iron T.box material Aluminium (die cast) 160, cast iron 180, 200, mild steel for 250 & 315 Frames Fan material Cast iron for 160, aluminium for 180, 200, mild steel for 250 & 315 Frames Accessories Nil Paint & shade NC base RAL 5012 shade up to 200, Epoxy base RAL 5012 above 200 frame Bearing type Greasing facility As given below Online greasing facility for 160 to 315

Specifications Frames: 90 to 355L Rating: 0.37 to 315.0 kW Poles: 2, 4, 6 & 8 Mountings: B3, B5, B14 & combinations Protection: IP55 Enclosure: Totally enclosed force cooled with 3ph fan motor

Specifications Frames: 100 to 180L Rating: 0.55 to 15.0 kW Poles: 4, 6 & 8 Mountings: B3, B5, B14, Pad & combinations Protection: IP55 Enclosure: TENV, TEFC with clean flow Applications: Ring, Loom, Carding, Ginning & Spinning

Specifications Dual Voltage / Dual Frequency motors Low Vibration motors for machine tools Motors for Extreme Climatic Conditions Motor for Import Substitute

Specifications Frames: 56 to 355L Rating: 0.093 to 315.0 kW Poles: 2, 4, 6 & 8 Mountings: B3, B5, B14 & combinations Protection: IP55 Enclosure: TEFC

Specifications Frames: 112M to 160L Rating: 0.75 to 7.5 kW Poles: 4, 6 & 8 Mountings: B5 Protection: IP55 Enclosure: TENV, TEFC

One of Indias most modern motor factories, incorporating extensive CAD facilities with over 50 years experience in the design and application of induction motors, enables MARATHON Electric to offer the benefits of proven solutions : MARATHON Electric has over 2000 MW installed world-wide. Upto 2500 KW range capability. All speeds available. Highest available efficiency rapid pay-back. High Power Factor Low Power Cost. 20 years expected design life at 1000 starts per year Resivac VPI Insulation System for total winding reliability. Highest quality lowest maintenance costs. Low Noise Level Better performance than IS: 12065. Low vibration level conforms to IS: 12075. IP 55 enclosure protection as standard on enclosed machines. Factory fixed Air Gap. Compliance with National and International Standards. Built to type N requirements. Upto 6.6 kV, 50 or 60 Hz. supply. Low Starting Current design available. Variable speed drive compatibility. Horizontal mounting. Rolling or Plain Bearings. Environmentally friendly motors to meet all drives. Type version available on request. "

Execution & Features FEATURES VALUES/ STANDARDS Starting DOL Loading at reduced volts 75% Rated volts for 5 minutes. Insulation Class `F' Temp rise 'F' Direction of rotation Bi-directional No. Of leads 3 up to 100 Frame, 6 for 112 and above Frames Degree of protection IP 55 Method of cooling IC 411 T.box position Side (RHS looking from DE, towards DE) Bearing life (90% survival basis) 40,000 working hrs. For direct drive 20,000 working hrs. For belt drive Vibration Normal class as per IS 12075 Noise As per IS 12065 Construction Foot Frame sizes 80 to 225 Shaft extension Single cylindrical extension as per IS 1231 Body material Aluminium up to 112, cast iron above 112 Frames T.box material Cast iron Fan material Polypropelene up to 112, cast iron for 132,160, aluminium for 180 to 200 Accessories Nil Paint & shade NC base RAL 5012 shade Bearing type Greasing facility Open type bearings for 80 to 200. No online greasing facility for up to 160 Frame. Online greasing facility for 180 to 225

Fabricated Robust Steel construction for frames. Uniform internal cooling circuit. Axial Cooling for smaller ratings, both radial and axial ventilation for larger ratings. Basic mounting dimensions as per IS. Class insulation system, both Resin rich & Resin poor (VPI) varieties available. Rotors are dynamically balanced Rotor bars are brazed with end rings by One Shot Brazing process. Environmentally friendly motors to meet all Drives Fault tested Phase Segregated Terminal box. RTD, BTD, Dial type Temperature indicator available. Separate Terminal Box available for Neutral point, RTD, BTD termination purpose. Provision for Magnetic Slot Wedge to improve Efficiency, Power Factor and improve Electromagnetic noise Provision for special Epoxy paint syste

MARATHON Electric presents KD series TEFC squirrel cage motors specifically designed for DOL operated Crane duty / intermittent duty application. The motors are designed to take care of the high electrical and mechanical stresses arising due to frequent starts stops associated with intermittent duty application. The motors are compact providing high output for a given frame size and have low inertia. These salient features make them most suitable for EOT Cranes. "

Specification ENCLOSURE - IS: 2148 RATING - IS :325 DIMENSION - IS:1231(FOOT) | IS: 2223(FLANGE) Range Frame : 90L 355L kW : 0.75 - 315 KW ( IN 4 POLES ) Increase Safety Specification DESIGN - IS: 6381 / IS:9628 RATING - IS :325 DIMENSION - IS:1231(FOOT) | IS: 2223(FLANGE) Range( Type 'e'/ 'n') Frame : E90L - E355L kW : 0.75 - 315 KW ( IN 4 POLES WITH T3 RTG. )

The MVE-MICRO external electric vibrators are characterized by their small size and consist of an electric motor housed in a robust cast iron body designed by FMEA, with eccentric weights mounted on both ends of the shaft.

The Energy Saver NEMA Premium Efficient design meets CSA-Motors and C-390, UL-Component & Insulation System Recognition and CE mark for the 320 frame and smaller. Five-year warranty is standard. This comprehensive warranty program covers both mechanical and NEMA Premium efficiency performance (36 months operational/40 months maximum from shipment). Meets NEMA MG1 table 12-12 premium efficiency levels. Tested per IEEE Standard 112, Test Method B. The insulation system meets NEMA MG1-31 standards for motors operating on Inverter power at 460 or 575 volts. Includes a 10:1 variable torque along with a 4:1 constant torque speed range. The frame, end shields, fan cover and conduit box are a rugged cast iron construction. A recessed steel-reinforced neoprene slinger minimizes contaminants from entering the bearing cavity. Additional HP is available at 1.15 service factor for severe applications. A non-hygroscopic, anti-fungus Class F insulation, with an 80C (NEMA B) temperature rise. 0.08 in/sec vibration meets the IEEE 841 Standard.

Frame size:H56-H280 Power factor:0.7~0.9 Power range:0.12~90kW Insulation:F insulation B temperature rise Pole's:2?4?6, 8 Protection:IP55 as standard, IP65, 56, 66, 67 on request Voltages:230, 380, 400, 415, 440, 460, 480, 500, 690V Cooling:IC411 Frequencies:50Hz(60Hz ConnectionDuty:S1(S2, S3, S4-S9) Greasing:Motors up to frame 160 have bearings greased for life, 180 and up have regreasing facilities Speed:3000?1500?1000, 750 Housing:Aluminium available up to frame 200 Cast iron from frale 112

Series:2.BOK, 2.BPOK Voltages:200-690V line and inverter operationFrame size:200 - 450 Frame construction:Fabricated steel Power output:18,5 - 1.320kW Degree of protection:IP23 Mounting arrangements:B3, V5, V6, B5, V1, V3, B35 Temperature class:155 (F) according to 130 (B) or 180 (H) according to 155 (F) Efficiency class:IE2, IE3 Cooling method:IC01 Number of poles:2, 4, 6, 8, 10 Certificates:CE, RINA, GL, ABS, RMRS, etc

Series:BN Voltages:200-690V line and inverter operation Frame size:250 - 400 Frame construction:Cast iron Power output:37 - 1.300 kW Degree of protection:IP23 Mounting arrangements:B3, V5, V6, B5, V1, V3, B35 Temperature class:155 (F) according to 130 (B) or 180 (H) according to 155 (F) Efficiency class:IE2, IE3 Cooling method:IC01, IC06 Number of poles:2, 4, 6, 8, 10 Certificates:CE, ABS, BV, DNVGL, KR, LRS, RINA, RS

Series:BD Voltages:200-1.100V line and inverter operationFrame size:315 - 560 Frame construction:Cast Iron Power output:375- 1.320kW Degree of protection:IP55, IP56, IP65, IP66 Mounting arrangements:B3, B5, V5, V6,V1, B35 Temperature class:155 (F) according to 130 (B) or 180 (H) according to 155 (F) Efficiency class:IE3 Cooling method:IC411, IC410, IC416, IC418 Number of poles:2, 4, 6, 8, 10 Certificates:CE

Certificates:CE Brand:Wolong Sever Voltages:380 - 690 VFrame size:180 - 355 Frame construction:Fabricated steel Power output:22-800 kW Degree of protection:IP23 Mounting arrangments:B3, V1 Temperature class:155 (F) according to 130 (B) Cooling method:IC01 Number of poles:2 - 16 Certificates:CE

MD series

SRK Top Drive

MP series

Series:CD; BD, BBD Voltages:200-690V line and inverter operation Frame size:63 - 500 Frame construction:Cast iron Power output:0,12 - 630kW Degree of protection:IP55, IP56, IP65, IP66 Mounting arrangments:B3, B5, V5, V6, V1, V18, B14, B35 Temperature class: 155 (F) according to 130 (B) or 180 (H) according to 155 (F) Efficiency class:IE3 Cooling method:IC411, IC410, IC416, IC418 Number of poles: 2 - 16 Certificates: ATEX, IEC-EX

Series:W Voltages:200-690V line operation Frame size:80 - 355 Frame construction:Cast iron Power output:0,75 - 315kW Degree of protection:IP55, IP56, IP65, IP66 Mounting arrangments:B3, V5, V6, B5, V1, V3, B35 Temperature class: 155 (F) according to 130 (B) or 180 (H) according to 155 (F) Efficiency class:IE3 Cooling method:IC411, IC410, IC416, IC418 Number of poles: 2,4, 6, 8 Certificates: ATEX, IEC-EX

Series:W-EF Voltages:200-690V line and inverter operation Frame size:90 - 315 Frame construction:Cast iron Power output:0,75 - 200kW Degree of protection:IP55, IP56, IP65, IP66 Mounting arrangments:B3, B5, V5, V6, V1, V18, B14, B35 Temperature class: 155 (F) according to 130 (B) or 180 (H) according to 155 (F) Efficiency class:IE3 Cooling method:IC411 Number of poles: 2 - 8 Certificates: ATEX, IEC-EX

Series:M Voltages:400V 50Hz Frame size:56 - 225 Frame construction:Aluminium, Cast iron Power output:0,25 - 100kW Degree of protection:IP55, IP56, IP65, IP66 Mounting arrangments:B3, B5, B14, V6, V5, B35, V1 Temperature class: 155 (F) according to 130 (B) Efficiency class:IE4 Cooling method:IC411, IC410, IC416, IC418 Speed range:0 - 3000 rpm Certificates: CE